CyberLink YouCam User manual

User's Guide
YouCam
CyberLink

Copyright and Disclaimer
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any
means electronic, mechanical, photocopying, recording, or
otherwise without the prior written permission of CyberLink
Corporation.
To the extent allowed by law, YouCam IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY FOR
INFORMATION, SERVICES, OR PRODUCTS PROVIDED
THROUGH OR IN CONNECTION WITH YouCam AND ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, EXPECTATION OF PRIVACY, OR
NON-INFRINGEMENT.
BYUSING THIS SOFTWARE, YOU AGREE THAT CYBERLINK WILL
NOT BE LIABLE FOR ANY DIRECT, INDIRECT, OR
CONSEQUENTIAL LOSS ARISING FROMTHE USE OF THIS
SOFTWARE OR MATERIALS CONTAINED EITHER IN THIS
PACKAGE.
The terms and conditions here under shall be governed and
construed in accordance with the laws of Taiwan.
YouCam is a registered trademark along with other company and
product names mentioned in this publication, used for identification
purposes and remain the exclusive propertyof their respective
owners.
International Headquarters
Mailing Address CyberLink Corporation
15F., No. 100, Minquan Rd., Xindian
Dist.
New Taipei City 231, Taiwan (R.O.C.)
Web Site http://www.cyberlink.com
Telephone [phone]
Fax [phone]
Copyright © 2013 CyberLink Corporation. All rights reserved.

i
Contents
..............................................................1
Introduction
..............................................................1Welcome
............................................................1Latest Features
............................................................2YouCam Versions
..............................................................3System Requirements
..............................................................5
YouCam Overview
..............................................................6Enabling YouCam for Instant Messaging
..............................................................6Launching YouCam
............................................................7YouCam Launcher
..............................................................8Display Modes
..............................................................9YouCam Modules
..............................................................11Program Interface
..............................................................11YouCam Settings
............................................................11Camera Settings
............................................................12Capture & Snapshot Settings
............................................................13Other Settings
............................................................13DirectorZone Settings
..............................................................15
Webcam Effects
..............................................................15Using Visual Effects
............................................................15Visual Effects Overview
............................................................17Adding and Applying Visual Effects
............................................................18Using Avatars
............................................................22Augmented Reality
..............................................................24Drawing on the Webcam Image
..............................................................25
Capturing Media

CyberLink YouCam
ii
..............................................................25Enhancing the Video Image
..............................................................26Taking Photo Snapshots
............................................................26Taking Snapshots
............................................................27Using the Burst Feature
............................................................27Applying the HDR Effect to Photos
..............................................................28Capturing Video
............................................................28Capturing a Webcam Video
..............................................................29Captured Content
..............................................................31
YouCam Media Library
..............................................................31Viewing Media in the Library
..............................................................32Sharing Media in the Library
............................................................32Uploading Videos to YouTube
............................................................34Uploading Photos to Facebook
............................................................35Uploading Videos to Facebook
............................................................35E-mailing Photos and Videos
..............................................................37
Editing Captured Media
..............................................................37Editing Photo Snapshots
............................................................38Tagging Faces in Photos
..............................................................39Playing Videos
..............................................................41
Panoramas
..............................................................41Creating a Panorma Image
..............................................................43
Full Screen Mode
..............................................................43Features in Full Screen Mode
..............................................................45
Presentations
..............................................................45Desktop Capture
..............................................................46Creating Video Presentations
..............................................................48Enabling Dual Webcam Videos
..............................................................51
YouCam Utilities
..............................................................51YouCam Mirror Mode
............................................................52Mirror Settings

iii
..............................................................52Video Surveillance
............................................................52Motion Detection Recording
............................................................54Continuous Recording
............................................................55Time-lapse Recording
............................................................55Auto E-mailing Surveillance Videos
..............................................................56Face Login
............................................................56Setting Up and Enabling Face Login
............................................................58Adding a Web Site to the Sign In List
............................................................59Editing Face Login Settings
..............................................................60Face-out
............................................................60Setting Up and Enabling Face-out
..............................................................63
Technical Support
..............................................................63Before Contacting Technical Support
..............................................................64Web Support

CyberLink YouCam
iv

1
Introduction
Introduction
Chapter 1:
This section introduces CyberLink YouCam and its latest features. It also
outlines the available versions and reviews the minimum system requirements
for the program.
Note: this document is for reference and informational use only. Its content and the
corresponding program are subject to change without notice. Please go to http://
www.cyberlink.com for additional information and product support.
Welcome
Welcome to the CyberLink family of software programs. CyberLink YouCam is a
creative little program that provides you with some fun and interesting effects for
your webcam. It also includes some useful features and add-ons that will help
you get the most out of your webcam.
Latest Features
This section outlines the latest features within the CyberLink YouCam program.
Panoramas*
Create panorama images with your webcam.
Face Tagging*
Tag the faces in your captured webcam photos.
HDR Effect*
Apply an HDR effect instantly to photos taken with your webcam.
Edit Photos*
Crop photo snapshots in the Edit window, or liven them up by adding color
preset effects, frames, or by drawing on them.
YouCam Launcher
Access all the features of CyberLink YouCam quickly from one convenient

2
CyberLink YouCam
location.
YouCam Media Library
Browse through a library of the photos and videos you captured with your
webcam in a calendar view, or by the faces* tagged in the photos.
Full Screen Capture Mode*
Use all of CyberLink YouCam's capture and effect features in a full screen
mode that's optimized for touch screens.
Note: * this feature is not available in some versions of CyberLink YouCam.
YouCam Versions
The features that are available in CyberLink YouCam are completely dependent
on the version you have installed on your computer.
To determine the version of CyberLink YouCam you are using, click on the
YouCam logo on the title bar, and then select About.
Updating Your Software
Software upgrades and updates (patches) are periodically available from
CyberLink. CyberLink YouCam automatically prompts you when either is
available.
Note: you must connect to the Internet to use this feature.
To update your software, do this:
1. Open the Upgrade Information window by doing one of the following:
click the button on the YouCam title bar.
click the Upgrade button in the About window.
2. Click the feature you would like to upgrade to, or the patch you want to
update with.
3. A web browser window opens, where you can purchase product upgrades
or download the latest patch update.

3
Introduction
DirectorZone
You can enhance your version of CyberLink YouCam by downloading more
visual effects* from DirectorZone.
Note: * this feature is not available in some versions of CyberLink YouCam.
DirectorZone is a free web service that lets you search for, download, and import
additional effects into CyberLink YouCam. You can also upload custom avatars
you create to DirectorZone, or share the details of the effects you used in
captured videos uploaded to YouTube.
Go to DirectorZone Settings to sign in, or directly to the DirectorZone web site (
www.directorzone.com) to view more information on the available features and
benefits.
System Requirements
The system requirements listed below are recommended as minimums for
running CyberLink YouCam.
Minimum System Requirements
OS
Microsoft Windows 8, Windows 7, Vista and XP 32-bit
SP3 (Windows XP Service Pack 3 is required).
Memory
1 GB (2 GB recommended).
CPU
Intel Pentium D 3.0 GHz.
AMD Athlon 64 3200+ or above.
HDD Space
1 GB required.
VGA Card
Intel 945 (Independent graphics card recommended).
Screen
Resolution
1024x768.
Device
Webcam (built-in or external USB).
Other
Software
Instant messaging software with video communication
functions, such as Skype, Yahoo Messenger, AOL
Instant Messenger.

4
CyberLink YouCam
Windows Internet Explorer 7 or above to use the Face
Login sign in to web sites feature.
Note: to ensure you can enjoy all the features in CyberLink YouCam, make sure
your computer meets or exceeds the minimum system requirements.
The system requirements listed below are the recommendations for running
CyberLink YouCam with full HD effects (1080p).
Recommended System Requirements for Full HD effect (1080p)
OS
Microsoft Windows 8/7 (with DirectX9 or above).
Memory
4 GB.
CPU
Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (4 CPUs),
~2.8GHz.
AMD A8-5600K APU with Radeon(tm) HD Graphics (4
CPUs), ~3.6GH.
HDD Space
1 GB required.
VGA Card
Intel HD Graphics 4000.
AMD Radeon HD 7560D.
Device
Webcam (built-in or external USB).
Other
Software
Instant messaging software with video communication
functions, such as Skype, Yahoo Messenger, AOL
Instant Messenger.
Windows Internet Explorer 7 or above to use the Face
Login sign in to web sites feature.

5
YouCam Overview
YouCam Overview
Chapter 2:
This section will help familiarize you with the CyberLink YouCam and give you an
overview of some of the features. CyberLink YouCam consists of a number of
different modes, modules, and windows. The YouCam interface can vary, but
many of the options stay consistent.
When in the Capture window, the program displays as below.
A - Home/Return to Launcher, B - YouCam Menu, C - Update/Upgrade YouCam, D -
Webcam Preview Window, E - Select YouCam Module/Window, F - Effects/Features
Panel, G - YouCam Settings, H - Capture Controls, I - Go to Library Window, J - Captured
Content

6
CyberLink YouCam
Enabling YouCam for Instant
Messaging
Once CyberLink YouCam is installed on your computer, you may have to enable
it before you can use it with your instant messaging software. The following
example demonstrates how to enable CyberLink YouCam for Skype.
Note: depending on the type of instant messaging software you are using, the
procedure to enable CyberLink YouCam will differ. Consult the help for the instant
messaging software you are using and see the section on selecting a webcam,
video settings, or something similar.
1. In the Skype main window, select Tools - Options.
2. Click on the Video settings section.
3. Find the Select webcam drop-down, and then select CyberLink Webcam
Splitter 6.0.
4. Click the Save button to set your changes and enable CyberLink YouCam
for instant messaging.
Launching YouCam
You can launch CyberLink YouCam in the following ways:
automatically when you begin a webcam video call with an instant
messaging software (this is known as IMmode).
manually from the start menu, desktop shortcut, or the icon in the system
tray (this is known as stand alone mode).
Note: you don't need to start a webcam video call to take photo snapshots, capture
live webcam video, or to start a desktop capture. Just simply launch CyberLink
YouCam manually in stand alone mode.
When CyberLink YouCam is launched, you will either see the YouCam Launcher
(where you can quickly access all the program's features), or the Capture
window. You can set how the program launches in Other Settings.

7
YouCam Overview
YouCam Launcher
The YouCam launcher provides quick access to all of CyberLink YouCam's
modules and features. Once enabled, it will display every time you launch the
program in stand alone mode.
To enable the YouCam Launcher, select the Show YouCam launcher at startup
option in Other Settings.
Note: you can go to the YouCam launcher at any time by clicking the button in
any of the available windows.
Favorites
You can add the YouCam features you use most often into the Favorites menu,
so you can quicklyand easily access them when required. Click the Favorites
tab to view your current favorite features.
By default, this Favorites tab is empty, but you can add a feature by doing this:
1. Click the tab in the YouCam launcher that has the feature you want to add to
your favorites.

8
CyberLink YouCam
2. Hover your mouse over the feature you want to add to your favorites, and
then select the star beside it.
Note: if you would like to remove a feature from your favorites, just deselect the
highlighted star next to the feature in the menu.
Display Modes
CyberLink YouCam has the following display modes: stand alone mode, IM
mode, split mode, full screen mode*, and mirror mode. Some features are only
available in certain modes.
Stand alone mode: when CyberLink YouCam is launched manually from
the start menu, desktop shortcut, or the icon in the system tray, it opens in
stand alone mode. In stand alone mode you can record and upload videos
to YouTube/Facebook, and e-mail photos. The video surveillance feature is
only available in this mode.
IM mode: when you start a webcam video call with someone on your instant
messaging software (Skype, Yahoo Messenger, etc.), CyberLink YouCam
launches in the smaller IM(instant messaging) mode.
Split mode: you can share your webcam with more than one webcam
application. To do this, launch your webcam application capture device and
ensure it is using the CyberLink Webcam Splitter 6.0 (see Enabling
YouCam for Instant Messaging for more information). Next, ensure the
CyberLink YouCam system tray icon is available, right-click on it, and then
select your Capture Device from the list. Next, set your Capture Resolution
and then select Launch Effects Room to open the effects room. When you
use visual effects, they display in any open webcam programs that are
using the CyberLink Webcam Splitter.
Full screen mode*: is a mode of CyberLink YouCam that is optimized for
touch screens. See Full Screen Mode for more detailed information.

9
YouCam Overview
Mirror mode: you can access this mode via the start menu, the system tray
icon, and through the Utilities. This mode is designed to act just like a real
mirror. See YouCam Mirror Mode for more detailed information.
Note: * this feature is not available in some versions of CyberLink YouCam.
YouCam Modules
CyberLink YouCam is comprised of three main modules: Camera,
Presentations, and Utilities. Each of these modules has different windows and
many different features.
These modules can be accessed via the YouCam Launcher or by selecting a
module or window from the drop-down at the top of most YouCam windows.
Camera
The Camera module is where you can capture and create webcam media, edit
the media, and more. The Camera module has the following windows and
features:
Capture: in the Capture window you can take photo snapshots and capture
webcam video with effects. See Capturing Media for more information.
Library: the Library window is where you can view all the photos and videos
you have captured in the Capture window. See YouCam Media Library for
more information.
Edit*: you can perform minor edits and touch ups on your captured media in
the Edit window. See Editing Captured Media for more information.

10
CyberLink YouCam
Panorama*: create panorama images with your webcam in the Panorama
window. See Panoramas for more information.
Full Screen*: lets you view your webcam in full screen mode. See Full
Screen Mode for information on the features and functions available.
Presentations
You can capture your computer's desktop, create video presentations, and
enable a second webcam in the Presentations module. The features in the
module include:
Desktop Capture*: capture a video of your mouse movements on your
computer's desktop. See Desktop Capture for detailed information.
Create Presentation*: create and record video presentations* that
incorporate a PowerPoint presentation and video from your webcam. For
more information, see Creating Video Presentations.
Dual Video*: enable a second webcam to record videos and use in
webcam chats in IMmode for web conferencing. Go to Enabling Dual
Webcam Videos for more information.
Utilities
CyberLink YouCam includes a number of useful utilities that are sure to help you
get the most out of your webcam. The Utilities module includes the following
features:
Mirror: provides access to the YouCam mirror. See YouCam Mirror Mode
for more detailed information.
Surveillance: select from a number of video surveillance and timed
recording options you can use with your webcam. Go to Video Surveillance
for more information on the surveillance features available.
Face Login*: use this feature to log in to Windows and your favorite web
sites with your face. See Face Login for information on setting up this
feature on your computer.
Face-out*: protect your computer with the Face-out feature that takes action

11
YouCam Overview
when you step away from your PC. For detailed information, see Face-out.
Note: * this feature is not available in some versions of CyberLink YouCam.
Program Interface
When using both stand alone or IM mode, you can resize the CyberLink YouCam
user interface to suit your requirements.
Simply click and drag in the bottom right corner to resize any CyberLink
YouCam window to fit your preference. You can also click on the CyberLink
YouCam title bar to drag the program to a different location on your desktop.
YouCam Settings
To configure the settings in CyberLink YouCam, select the button on the top
of the effects/features panel. Once you are done configuring the CyberLink
YouCam settings, select OK to set your changes.
Camera Settings
In the settings window, select the tab. The available options are as follows:
Capture device: select the primarywebcam device you want to use with
CyberLink YouCam from the drop-down list.
Capture resolution: select the size/resolution of captured video from the
drop-down list. Selecting a larger video size, results in a larger video file.
Note: CyberLink YouCam supports high-definition (1280×720) video capture if your
webcam supports it. If capable, the 1280×720 option is available (without
"Snapshot only" beside it) in the Capture resolution drop-down list.
Audio device: select the audio device from the drop-down list that you want
YouCam to use when capturing webcam videos.
Flip horizontally: select this option to flip the webcam image horizontally.
Note: you can also click on the webcam image and drag left or right to flip it
horizontally. If using a touch enabled display device, you can flip it by swiping left
of right on the webcam image.
Capture with audio: select this option if you want captured webcam video to

12
CyberLink YouCam
have audio.
Note: you need to have a microphone connected to your computer or webcam to
capture webcam video with audio.
Enable video zoom: select this option if you want to zoom in on the webcam
video image. Once selected, the following features are enabled:
Auto face detection: select to have CyberLink YouCam detect your face
and auto zoom in slightly. Using this feature enables the program to
track and follow your face as it moves around the webcam image.
Manual zoom: use the slider to manually zoom (up to 4x) in on a specific
part of the webcam video. Drag the boxed area to the area of the video
you want the camera to focus on.
Capture & Snapshot Settings
In the settings window, select the tab. The available options are as follows:
Capture folder: set the folder where captured photos and videos are saved.
To change the capture folder, select the button and then a new
folder location.
Countdown before capture: select this option to enable a three second
countdown before CyberLink YouCam begins capturing photo snapshots
or videos.
Display timestamp: select this option to display a timestamp on the
webcam image. Once enabled, select the desired timestamp display
format from the drop-down list.
Capture format: select the file format for captured video from the drop-
down list. If your computer supports Intel Quick Sync Video Technology, the
HD H.264 (MP4) format video format is available.
Capture quality: select the qualityof the captured video from the drop-down
list. The higher the qualityselected, the larger the file size created.
Snapshot format: select the photo file format of the captured snapshots
from the drop-down menu.
Shutter speed: select the rate of exposure, or the quickness the webcam

13
YouCam Overview
takes the snapshots.
Burst snapshots: in the field provided, specifythe number (between 2 and
10) of photo snapshots you want taken when the burst capture option is
enabled.
Other Settings
In the settings window, select the tab. The available options are as follows:
Change UI language: select the desired language of the CyberLink
YouCam user interface. Select Auto to have the UI language match your
computer's operating system language.
Effect thumbnail size: lets you set the size of the visual effect thumbnails
for emotion effects, avatars, gadgets, scenes, etc.
Show YouCam system tray icon at startup: select this option to have the
CyberLink YouCam system tray icon display when you log in to Windows.
Enable effect preview: when selected, CyberLink YouCam displays a
preview of the frame, distortion, and filter effects in the visual effect
thumbnail. Disable this option to save computer resources.
Keep original photo when HDR effect is enabled: if the HDR effect is
enabled when taking photo snapshots, select this option if you want to
keep a copy of the original photo. CyberLink YouCam applies the HDR
effect to this original photo after capture. See Applying the HDR Effect to
Photos for more information.
Show YouCam launcher at startup: select this option if you want the
YouCam launcher to display at startup. If not selected, CyberLink YouCam
displays the Capture window at startup.
DirectorZone Settings
On the settings window, select the tab. The available options are as follows:
Sign in to DirectorZone:
Auto sign in to DirectorZone when YouCam is launched: select this option
and then enter in your e-mail address and password to automatically sign

14
CyberLink YouCam
in to DirectorZone when the program is opened. If you do not have a
DirectorZone account, click on the Get an Account link.