CyberPower CPSDL02 User manual

Remote Management System
USER’S MANUAL
Data Logger
SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

Introduction
Overview
Features
‧
‧
‧
‧
‧
‧
‧
‧
System Requirements
‧
‧

Application
Unpacking
‧
‧
‧
‧
Product Callouts
‧
Name
Description

‧
Name
Description
‧
Name
Description
Warning:

Installation Guide
Step 1. Hardware Installation

Note:
Definitions for LED Indicators
LEDs
Condition
Power LED
color
COM LED
color

Link LED
color
Tx/Rx LED
color
Step 2. Software Configuration
System Integrator
System Integrator
1. Configure the connection between the PV Inverter and the Data Logger
Device
→INVERTER →Configuration
Apply

New Enable
Apply
Note:

Enable Apply
Delete
Note:
2. Configure Data Logger to the CyberPower Terra Cloud
System →Terra Cloud →Authentication
Equipment →
Data Logger List
Note:

Step 3. Configure the IP address for the CyberPower Data Logger
Method 1: Using the Power Device Network Utility
Refresh

Tools
Save

Method 2: Using a command prompt
Note:
arp -s 192.168.10.134 00-0C-15-00-FF-99 Enter
ping 192.168.10.134 -l 123 Enter

Web Interface
Login User Account
admin
admin
device
device
Note:
Web Content
[Device]
[INVERTER->Status]
Item
Definition

[INVERTER->Information]
Information
Description
[INVERTER->Configuration]
Item
Definition

[POWER METER]
Item
Definition

[Envir]
[Envir->Status]
Item
Definition
[Envir->Configuration]
Item
Definition

[Logs->Event Logs]
Note:
[Logs->Status Records]
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
[Logs->Graphing]
Item
Definition
[Logs->Maintenance]
Item
Definition
Note: