Cydiance B Series User manual

User Guide
Manual del Usuario
B series
Including B1/B2/B3 models
Cydiance Bluetooth/USB data logger
User Guide Version, ENES202002
Technical Support, [email protected]
Ocial Website, www.cydiance.com
Download App
WARNING!
KEEP AWAY from babies, children and pets,
this device is not a toy.
DO NOT place the device near re, battery
contained inside may cause danger.
Considering our recycling program before
dispose to environment.
User Guide Online
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired opera-
tion.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio frequen-
cy energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in aparticular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on acircuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, The 20cm is the minimum distance that has to be
maintained between your body and the device.
FCC ID:2ATW5-CB01

How to USE the device
●START Press the button for 5 seconds till both LED light up, the LED
will then ash every 3 seconds indicating the logger is working.
●MARK event Press the button once, the RUN LED will light up for 1
second, indicating a MARK has been made successfully. Total 8
MARKs can be made.
●STOP
→Device will stop when it reaches to maximum of data capacity.
→Device will stop when it’s USB plugged into computer.
→Device manufactured before Dec 4th, 2019 can be stopped
manually.
●GET REPORT
→Download the Cydiance App and read with Bluetooth;
→Remove the bag and plug USB into the computer.
How to PLACE the device
●Place the device on top of the rst and last pallet, or directly put
into the package.
●DO NOT remove the plastic bag before getting report!
Log Cycle
Run
Start/Mark Button
Serial #
Humidity Sensor(B2 only) Cómo usa el dispositivo
●ENCENDER Precione el botón durante 5 segundos hasta que am-
bos LED se enciendan,el LED parpadeará cada 3 segundos indican-
do que el registrador está funcionando.
●HACE una MARCA Precione el botón una vez,el LED RUN se ilu-
minará durante 1 Segundo,indicando que se ha realizado una MAR-
CA correctamente.Se pueden hacer 8 marcas.
●APAGADO
→El dispositivo se detendrá cuando alcance la capacidad máxima
de datos.
→El dispositivo se detendrá cuando esté conectado por USB a la
computadora.
→El dispositivo fabricado antes del 4 de diciembre de 2019 se
puede detener manualmente.
●REPORT
→Descargue Cydiance App y lea con Bluetooth
→Retire la bolsa plástica y conecta al Puerto usb de la compu-
tadora.
Cómo coloque el dispositivo
●Coloque el dispositivo encima del primer o ultimo palet,o co-
lóque directamente en el paquete .
●NO retire la bosla de plástico a menos de que haya terminado su
viaje y haya querido leer el informe.
Alarm Led