Cydle T43H User manual

4.3” Portable GPS car Navigation

Cydle T43H integrates enhanced functions such as Global Positioning System (GPS), HD
Radio Receiver, HD traffic update, music player, video player, and picture viewer
functions into a single, easy to use economical unit.
Our system allows you to listen to high quality FM channels that features multicasting
data service on FM band.
Real-time traffic service over HD Radio broadcasting is also available in North America.
T43H is Preloaded with a highly detailed city navigator for North America, including
Canada, US Puerto Rico and Hawaii.
There are countless POIs which will enable you to find hotels, restaurants, gas stations
and so much more at your convenience, anytime, anywhere.
Your T43H is suitable for daily use under any circumstances. Its functionalities will
simply take you beyond what you would normally expect from an ordinary GPS.
*HD Radio™ Technology is manufactured under license from iBiquity Digital Corporation.
U.S. and Foreign Patents. HD Radio™ and the HD and HD Radio logos are proprietary
trademarks of the iBiquity Digital Corporation.
All other trademarks, whether claimed or registered, are the exclusive property of their
respective owners.
T43H
Please contact Cydle if you have any inquires while using T43H.
Contact http://www.cydle.com or mail to [e-mail]
Get further information and all contents for T43H at our official Cydle site:
- Get the latest software at the Cydle site for free
- Update your map via online Cydle store
- Please join us as a registered member for faster, enhanced tech support
by creating a personal account.
Contact
Introduction
Introduction
Thank you for choosing our Cydle T43H as your portable navigation device. We are
committed to provide you with the very best. We hope you find the instructions in
this owner‟s manual clear and easy to follow. Please take a few minutes to read this
user manual and learn how to use all the features in your new Cydle T43H that
provide maximum driving enjoyment.
2
1

Introduction
1. Introduction
T43H
Contact
Contents
2. Before you start
Safety precaution
What‟s in the box
Name of Parts
Installation
Connecting to Ext. FM HD Radio antenna
Switching on and off
Volume on and Volume off
Reset
Speaker icon and Mute
Back Light off to save power
Battery saving mode
Battery notes
Charging the battery
Menu
3. Getting started with your GPS
Driving View
Menu page
4. Finding your destination
a. Where to?
Home
Favorites
Emergency
Recent Destination
Address
Intersection
Telephone No
Zip code
Point on Map
Itinerary
Cities
POI Name
POI in City
POI in Category
Start Travelling Guidance
Table of Contents
2
2
3
6
7
8
9
12
13
13
13
14
14
15
15
15
16
22
24
25
26
26
27
28
28
29
29
30
32
32
33
33
34
19
21
1
6
18
22
3
Introduction
1

5. Traffic information using HD Radio Technology
Real-time traffic information
Traffic service status
Traffic Menu
Traffic on Route
Traffic Map
Traffic Flow
Traffic Details
Traffic List
Traffic Classes
Traffic Setting
Traffic Station
6. Customizing Cydle XE
Settings
Color mode
Map view
Set Brightness
Map Colors
Auto Zoom
Home
Label on Map
Voice and Text Language
Routing Options
Units
Set Clock
Time Zone
Speed Limit
Fuel
Volume
Keyboard
About
Restore Settings
Introduction
b. Route options
Manage your route
Create Route
Edit Route
Detour
Route summary page
37
37
38
38
40
42
43
43
43
44
44
45
45
46
46
47
48
49
50
50
52
52
53
53
53
54
54
55
55
56
56
56
57
58
59
59
59
60
4
Introduction
1

5
8. Music
Sound settings
Display settings
Selecting System Language
Date & Time settings
Selecting Theme
Calibration
System Information
17. User information and Precautions
Introduction
7. GPS status
18. Copyright
14. Settings
9. Movie
10. Picture
11. Calculator
13. HD Radio Technology
Calendar
15. Update
93
94
83
OS update
Software update
App +Map update
App update
Map update
78
74
71
69
61
63
66
72
78
79
80
81
81
82
82
83
85
86
88
89
5
Introduction
1
12. Utility 72
Stopwatch 73
16. Specification 91
* EULA 95

Your unit contains a number of electronic components that can be
damaged permanently when exposed to shock or vibration. To protect
your unit from damage, please keep your unit in a stable environment
and avoid dropping your unit. Also, do not operate under high–shock
and high-vibration environments.
Clean the outer surface of your unit by gently wiping off with a mild
detergent-dampened cloth.
Avoid chemical cleaners that can damage to plastic components.
Clean the touch screen with a soft, clean cloth. You can use water or
an eyeglass cleaner to dampen the cloth. However, do not apply liquids
directly onto the touch screen. Dampen the cloth with liquid and then
gently wipe the touch screen.
A PDA stylus pen can be used to operate the touch screen. Never use
hard or sharp object to operate the touch screen as it might cause
damage.
Do not expose your unit to water. Contact with water can cause the
unit to malfunction.
Safety precaution
•Do not operate your device while driving. Please drive safely and pay attention
to the road and pedestrians. Always practice safe driving.
•To reduce the risk of traffic accidents, never use the video display function while
driving. This is a violation of federal law.
•Never disassemble or adjust the unit unless instructed to do so by this manual.
•To prevent injury from shock or fire, never expose the unit to moisture or water.
•Never use irregular software and data.
•To prevent internal damage of the unit, avoid direct impact to the TFT monitor.
•Using an improper fuse may cause damage to the unit and result in a fire.
Caution
2
Before you start
6
Before you start

What‘s in the box
2
Cydle GPS Navigation Quick Start Manual
NOTE :
Go to the support section of the Cydle website to download the electronic manual with
detailed information available in multiple language formats for T43H.
Before you start
Before you start
Cydle GPS Navigation
Quick Start Manual
Cydle Navigator Cradle
Super Suction Mount
a
b
c
d
e
f
DC Car adaptor
USB cable
Ext. FM Radio antenna
ab
7
Cydle Navigator Cradle Super Suction Mount
cd
DC Car adaptor USB Cable Ext. FM Radio antenna
e f g
AC adaptor Ext. GPS ANT Earphone
Charging and connecting
Installing in your automobile
Getting to know and start…
Sold separately
g

Name of parts
2
Before you start
Before you start
Microphone(Applied only to the
Bluetooth model (T43HB))
Power Button
Volume Up
Volume Down
Reset Button
Name of parts
c
f
g
i
Earphone connector/
Ext. FM Radio antenna connector
Audio out connector
USB port /Car Battery Adaptor connector
External GPS Antenna connector
SD slot
a
b
c
d
e
f
g
h
i
j
8
ab
d
e
h
j

1. Clean the area where your unit is to be installed with rubbing alcohol and soft
cloth. Allow to dry.
2. Push the pedestal suction cup firmly
onto the connector and then flip the A
lever down to secure the suction cup.
3. Use the Bknob to adjust
the angle and rotation of the
pedestal for maximum
visibility.
4. Attach the cradle onto the suction
cup.
5. Place your device in the cradle.
Press the front surface of the
cradle toward the mount until it
clicks. The unit is now fixed in the
cradle.
6. Insert the power adapter into the
cigarette jack and connect it to
the DC input of the navigation
cradle to turn on the power.
Installation
2
Before you start
Before you start
Installing on Dashboard
This unit is designed to be installed on dashboard or windshield found in every
vehicle. Please install your unit in a safe manner.
NOTE: It is the end-users‟ responsibility to install and operate this unit in a manner
accordance to the local, state and federal laws.
9
A
B
DC Car Adaptor

1. Clean the area where your unit is to be installed with rubbing alcohol and soft
cloth. Allow to dry.
2. Push the pedestal suction cup firmly
onto the connector, then flip the A
lever down to secure the suction cup.
3. Use the Bknob to adjust
the angle and rotation of the pedestal
for maximum.
4. Attach the cradle onto the suction
cup.
5. Place your device in the cradle.
Press the front surface of the
cradle toward the mount until it clicks.
The unit is now fixed in the cradle.
6. Insert the power adapter into the
cigarette jack and connect it to the
DC input of the navigation cradle to
turn on the power.
2
Before you start
Before you start
DC Car Adaptor
Installing onto the windshield
A
B
10
NOTE :
•Once the cradle is attached, the angle of the adhesive bracket can be adjusted by
applying gentle pressure to the top or bottom of the cradle.

2
Before you start
Before you start
NOTE :
•Please make sure that you install the device where it would not block the
driver‟s view.
•Do not install the product on top of the air bag cover or near the air bag
deployment zone.
CYDLE has no responsibility of liability for injury or death as a result of car
crash and/or air bag deployment.
•The navigator cradle may fall off the windshield if it is attached to the
windshield with a suction cup for an extended period of time. To prevent this,
please rest the navigator onto the dashboard while it is attached to the
windshield. When not in use, please detach it from the windshield and store the
unit in a safe area.
•Do not pull the front part of the navigation cradle forcefully or abruptly as it
may break off.
11

2
Before you start
Before you start
Connecting to the External FM HD Radio antenna
< Reception Enhancement >
This unit is designed to receive digital radio channels and traffic information using
High Definition (HD) Radio Technology.
In order to improve HD Radio reception, an external FM HD Radio antenna is
provided to you.
12
1. After installing your unit onto the dashboard or windshield, please connect the
external FM antenna to improve the HD Radio reception.
You can find the Earphone/External antenna connector on the unit's upper-right
side. (refer to page 8)
2. Connect to the External FM antenna.
Earphone/
External FM Antenna Connector
3. Attach the External FM antenna onto the windshield with Vinyl suction cups.
Note:
Please make sure that the device is in an open space away from tall objects such
as buildings or trees. Reliable HD Radio reception is highly dependent upon
placement of the antenna and features of your car such as reflective shielding on
the windshield.

Switching on and switching off
2
The power switch is located on the upper right side of your unit as shown on the
Name of Parts section on page 8.
•Powering your unit on : Press and hold the Power switch for more than 3
seconds
•Powering your unit off : Press and hold the Power switch for more than 3
seconds
Volume up and Volume down
There are two ways to control the volume. One is tapping the speaker icon on the
screen and the other is pressing hard keys found on the left side of the device as
shown below.
Before you start
Before you start
13
•The volume control is located on the
left side of the unit.
•In order to increase or reduce the
volume, press the volume control
upwards or downwards.
Reset
The unit will not respond to your order when the operating system fails.
If the desired function cannot be executed, the unit should be restarted using the
reset button.
•The reset button is located on the left side of the unit.
•Press the reset button with a sharp object such as pin
or pencil.

Speaker icon and Mute
2
Before you start
Before you start
14
•Speaker icon is located on top of the
screen. It indicates current volume
level from Mute to level 12.
(Default volume level is 10)
•For each application, Mute button will
allow you to set volume “level 0” with
one easy click. The speaker icon
indicates that the volume is muted.
•To cancel mute function, simply tap
Mute button again and T43H will
automatically un-mute.
Back Light off to save power
1. Tap on Setting from the main menu screen.
2. Tap on Display setting.
3. Tap on Back Light and set the time
duration ; Never, 1minute,…
(Default setting of Back light option is 10 sec.)
Gently press the volume key (increase or decrease) to turn on the back light.
Your unit can be set up to automatically shut down the LED back light of the screen
by using the time duration setting. Your unit will automatically turn off the back
light after the time duration has passed without any physical contact applied onto
the touch screen.
If your unit is connected to a DC adaptor or
USB cable, then the Back Light will always be
turned on even when the Back Light setting is
set as “Never”.
< Back Light on >
<Setting>
<Displaysetting>

Battery saving mode
You can use the Battery Saving Mode
when the unit is not in use but when you
don‟t want to turn it off.
Using the Battery Saving Mode will
significantly reduce electrical consumption
as well as the time required for reboot.
When you press and hold the Power switch for 2 seconds, your unit will be
under the Sleep/Wake Up mode. When your unit is locked, nothing will
happen when you touch the screen.
2
Before you start
Battery notes
- Battery notes
On the upper right hand corner of screen, the Battery icon indicator will
indicate the status of the remaining internal battery level.
Battery is fully charged.
Please fully charge the battery without interrupting the charging.
<Battery Notes>
15

Charging the battery
2
- Battery notes
The unit automatically detects connection and
displays a message “Mass storage mode. The unit
will link to the PC. Would you like to connect to
the PC directly?”.
Click ”No” to start charging the battery.
System will start charging the battery as displayed
on the main menu screen.
Please fully charge the battery without any
interruption.
3
To stop charging the battery via USB, just
disconnect the USB cable from the PC. Then the
system will shut down immediately after the
disconnection. Turn on the unit by pressing the
Power key for 3 seconds to start again.
4
The link involves several steps as shown below.
Connect your unit to a USB port on your PC using the
cable that came with your unit.
You can find the USB port at the right side of the unit.
1
USB Cable
Before you start
Before you start
16
The DC adaptor included in the box will charge the
battery most efficiently.
When your unit is being charged with the DC adaptor,
the battery icon will appear.
DC adaptor
The USB port is used to link the unit directly to a
personal computer.
You can also charge your battery through the USB
port in the unit.
2

2
Menu
The following applications are included with your unit
NAVIGATION
HD Radio
MOVIE PLAYER
MUSIC PALYER
PICTURE VIEWER
CALCULATOR
UTILITY
SETTING
View pictures in rotation and full screen mode.
Listen to the songs from your PC via SD card.
Watch movies from your PC via SD card.
Listen to FM channels with crystal clear high-
definition sound.
Arrive to your destination faster with clear and
easy-to-follow guidance from your T43H.
Add, subtract, multiply and divide.
Use the calendar from your T43H.
Set up and adjust all of your T43H settings with
the touch of a button.
17
Before you start

3
To start Navigation, click the Navigation icon on the menu screen.
Cydle T43H has Cydle XE traffic preinstalled as navigation software.
Cydle XE traffic will start by showing Driving view along with detailed
information about your current position, speed, destination and
more.
Getting started with GPS
Getting started with GPS
18
Getting started. Initial Screen.
After the GPS starts, you will see the declaration screen
as shown above.
Navigation system automatically locates your current position on the
map by receiving GPS signals. If the navigation system doesn‟t receive
GPS signals properly, it could take some time to locate your current
position. Please refer to page 39 <Information> numbers 4 through 9
for GPS signal disturbance.
< Declaration screen >
< Map screen features –Normal mode>

3
The navigation system automatically locates your current position on the map by
receiving GPS signals. If the navigation system doesn‟t receive GPS signals properly,
it could take some time to locate your current position.
Getting started with GPS
Getting started with GPS
Driving View
19
1Zoom out: Zoom out from level 1 to level 21
2
Compass: By tapping this icon, you can change the map display mode
To Track up, North up or 3D view. (Refer to Settings>Map View for
more information)
3Next street name
4Zoom in: Zoom in from level 1 to level 21
5Current street name
6
Turn-by-Turn instruction: Provides information for next guidance
(Tap this icon to go to Turn-by-Turn screen)
7
GPS signal reception: Tap this icon to go to GPS Status/information
page
8Current speed

3
Getting started with GPS
Getting started with GPS
20
9Current time
10 Expected arrival time at destination
11 Remaining travel time from current position to destination
12
Remaining travel distance from current position to
destination
(To go to Route Summary page, tap anywhere from 9-12)
13 Menu button: Tap to go to Menu
14 Map scale: Indicates current map scale level
15 Voice guidance repeat button: Repeats the last voice instruction