CYP CPRO-11SI User manual

CPRO-11SI
HDMI 4K2K Audio Inserter
Operation Manual
Operation Manual


DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology. All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 14/06/13 Preliminary release
RDV2 13/09/13 Optical Sampling Rate
VS1 06/01/16 Updated text/diagrams

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Top Panel ...........................................3
6.2 Right Panel.........................................3
6.3 Left Panel ...........................................4
6.4 Rear Panel .........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
8.1 Technical Specications ..................6
8.2 Supported Audio Formats................7
9. Acronyms ............................................... 7

1
1. INTRODUCTION
The HDMI ™4K×2K Audio Inserter allows an external audio signal to be
inserted into your HDMI or DVI (with an HDMI to DVI adaptor) signal
path. The unit allows you to insert analog stereo or multi-channel
surround sound (via the digital optical input) giving you the exibility
to add your choice of audio to the video while extending your
HDMI signal. It also has the added benet of 4K×2K and 3D support,
allowing full resolution video and eliminating the need to downscale
the image.
2. APPLICATIONS
• Embed external audio into an HDMI signal
• Integrate DVI video and an audio signal into a single HDMI output
(requires HDMI to DVI adaptor)
• Replace the original HDMI audio with an external audio source
3. PACKAGE CONTENTS
• HDMI 4K×2K Audio Inserter
• 5 V/1.2 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source device such as a PC/Laptop or Blu-ray/DVD player and TV/
display or AV receiver with suitable HDMI connection cables.

2
5. FEATURES
• Compliant with HDMI, HDCP 1.2 and DVI 1.0
• Supports HDMI audio sampling rates up to 192 kHz
• Supports Optical (S/PDIF) digital audio sampling rates up to 192 kHz
• Supports selection of original HDMI audio or embedding of external
Digital or Analog audio into HDMI signal pathway
• HDMI supports high-bit-rate (HBR) audio
• Supports maximum input and output HDMI cable lengths of up
to 15 meters each at 1080p/8-bit resolution or 10 meters each at
1080p/12-bit or 4K×2K resolution
• Supports DVI conversion with HDMI to DVI adaptor
• Supports CEC bypass function
• Supports 4K×2K@24/30 Hz resolution and 3D signals
Note: For playback of 4K×2K/3D HDMI source signals, a 4K×2K/3D
capable display and High Speed HDMI cables are required.

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
LinkBypass Power
UHD 4Kx2K
Audio Inserter
1 2 3
1Bypass LED: This LED will illuminate when the audio input is switched
to HDMI, bypassing the external audio inputs.
2Link LED: This LED will illuminate when an active HDMI signal is being
received.
3Power LED: This LED will illuminate when the unit is connected to an
active power supply and switched ON.
6.2 Right Panel
HDMIOpticalServiceL/R
In
3 41 2
1Service: Manufacturer use only.
2L/R In: Connect to an analog audio source such as a PC/Laptop or
DVD/Blu-ray player with a stereo analog (L/R) audio signal output.
3Optical In: Connect to a digital audio source such as AV receiver
or DVD player with a digital optical signal output.
4HDMI In: Connect to a source such as Blu-ray player, games
console or PC/laptop with an HDMI output.

4
6.3 Left Panel
HDMI Out
1
1HDMI Out: Connect to a TV/display with an HDMI cable for output
of the combined audio/video HDMI signal.
Note: For playback of 4K×2K/3D HDMI source signals, a 4K×2K/3D
capable display and High Speed HDMI cables are required.
6.4 Rear Panel
DC 5V
Power
Optical
HDMI L/R
31 2
1Input Switch: This switch allows the user to select the required audio
input to be inserted into the HDMI signal.
HDMI: Selects the original audio of the HDMI source device.
Optical: Selects the external audio of the digital optical audio
source.
L//R: Selects the external audio of the analog stereo (L/R) audio
source.
2Power Button: Press this button to switch the unit on or to set it into
standby mode.
3DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor to an AC wall outlet.

5
7. CONNECTION DIAGRAM
LinkBypass Power
HDMI 4Kx2K
Audio Inserter
CD Player
PC/Laptop
Analog
Stereo
Input
Optical
Digital
Input
Blu-ray Player
HDMI
Input
HDMI
Output
HDMI
Output
Power Supply
AV Receiver
HDTV or Monitor

6
8. SPECIFICATIONS
8.1 Technical Specications
Video Bandwidth 300 Mbps/10.2 Gbps
Input Ports 1×HDMI, 1×Optical, 1×3.5mm Mini-jack,
1×Mini-USB (Manufacturer use only)
Output Port 1×HDMI
Audio Sampling Rates HDMI: Up to 192 kHz
S/PDIF (Optical): Up to 192 kHz
HDMI Audio Formats LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH,
DTS 2~5.1CH, Dolby Digital Plus, Dolby
TrueHD & DTS-HD Master Audio
Optical Audio Formats LPCM 2CH, Dolby Digital 2~5.1CH & DTS
2~5.1CH
L/R Audio Format Analog Stereo 2CH
HDMI Cable I/O Distance 15 m (1080p@8-bit), 10 m (1080p@12-bit),
10 m (4K×2K)
Power Supply 5V/1.2A DC ( US/EU standards, CE/FCC/
UL certied)
ESD Protection Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Dimensions 85 mm (W)×87.5 mm (D)×34mm(H)
Weight 102 g
Chassis Material Plastic
Color White
Operating Temperature 0 ˚C~40˚C / 32 ˚F~104 ˚F
Storage Temperature −20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90 % RH (non-condensing)
Power Consumption 2.37 W

7
8.2 Supported Audio Formats
INPUT
FORMAT HDMI Optical Analog
LPCM 2CH
LPCM 5.1CH - -
LPCM 7.1CH - -
Bitstream 5.1CH -
Bitstream 7.1CH - -
9. ACRONYMS
ACRONYM COMPLETE TERM
4K×2K Ultra HD (3840×2160 / 4096×2160)
DTS Digital Theater System
EDID Extended Display Identication Data
HDCP High-bandwidth Digital Content Protection
HDMI High-Denition Multimedia Interface
HDTV High-Denition Television




Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
20130627 MPM-CPRO11SI
Other manuals for CPRO-11SI
1
Table of contents
Other CYP Accessories manuals