CYP CLUX-11HB User manual

CLUX-11HB
L/R & Optical Audio to HDMI Bridge
Operation Manual
Operation Manual


DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 25/07/13 Preliminary Release

CONTENTS
1. Introduction...............................................1
2. Applications..............................................1
3. Package Contents ...................................1
4. System Requirements...............................1
5. Features.....................................................1
6. Operation Controls and Functions..........2
6.1 Front Panel ...........................................2
6.2 Rear Panel............................................3
7. Connection Diagram ...............................4
8. Specications ...........................................5
8.1 Audio Specications .........................6
8.2 Input Audio to Output Audio Chart..6

1
1. INTRODUCTION
The L/R and Optical Audio to HDMI Bridge is designed for analog or
digital audio signal to be send out through HDMI. Allowing immidiate
plug-and-play enjoyment over HDMI audio without obstruct. When
connecting to a HDMI display a blue screen will appear with a
simple OSD to show the current input audio. Supporting digital audio
sampling rate up to 192kHz and analog audio sampling rate up to
48kHz.
2. APPLICATIONS
• L/R or Optical audio convert to HDMI output
• HDCP regulated HDMI devices
• Audio management and control system
3. PACKAGE CONTENTS
• 1 x L/R & Optical Audio to HDMI Bridge
• 1 x 5V DC Power Adaptor
• Operational Manual
4. SYSTEM REQUIREMENTS
Input audio source equipment with L/R or Optical ouptut and HDMI
devices such as TV/Display or HDMI equipments.
5. FEATURES
• Supports Analog to Digital audio Conversion (ADC)
• Supports Optical audio sampling rate 32kHz to 192kHz and LPCM
2CH
• Supports L/R audio smapling rate at 48kHz
• Plug and play with no software require

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
ANALOG DC 5V
POWER
OPTICAL
LR
INPUT
12 3
1INPUT L/R:
Connect from audio source equipment with L/R output with L/R
RCA jack cables.
2INPUT Optical:
Connect from audio soure equipment with optical output with
optical cable.
3DC 5V & Power LED:
Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet the LED will illuminate when the device is
connected with power supply.

3
6.2 Rear Panel
SERVICE
HDMI OUT
ANALOGOPTICAL
50 60
720P
1 2 3 4
1SERVICE:
This slot is reserved for factory rmware update only.
2OPTCIAL/ANALOG Switch:
Switch to select input from Optical or Analog L/R.
3720p 50/60 Switch:
Switch to display output blue image with 720p/50 or 720p/60.
OSD will display current input audio and output timing for 15
seconds.
4HDMI OUT:
Connect with HDMI equipped device such as HDMI matix, swithcer
or HD TV/display. Audio support up to 192kHz with Optical or 48kHz
with Analog.

4
7. CONNECTION DIAGRAM
HDMI Equipped Deviec
Audio Amplier Audio Player
ANALOG DC 5V
POWER
OPTICAL
LR
INPUT
SERVICE
HDMI OUT
ANALOGOPTICAL
50 60
720P

5
8. SPECIFICATIONS
Input port 1 x L/R (Analog Stereo 2RCA), 1 x Optical
Output port 1 x HDMI
Audio Input Sampling
Rate
L/R: 48kHz
Optical: 32~ 192kHz, LPCM 2CH
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5V/ 2.6A DC (US/EU standards, CE/FCC/
UL certied)
Dimensions 78.5mm(W) x 95.5mm(D) x 30mm(H)
Weight 170g
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 2.6W

8.1 Audio Specications
INPUT OUTPUT Output
Level
T.H.D+N Frequency
Response
SNR Crosstalk
Optical
0dBFS
1kHz/
32KHz~
192KHz
HDMI 2Vrms
±10
<0.01% ±1 dBFS >80 dB <−80dB
Line
2Vrms/
1KHz
HDMI 2Vrms
±10
<0.01% ±1 dBFS >80 dB <−80dB
8.2 Input Audio to Output Audio Chart
Audio Input Input Format HDMI Audio Output
Analog L/R Analog 2CH LPCM 2CH
OPTICAL LPCM 2CH LPCM 2CH
Dolby Digital Bypass

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
20130329 MPM-CLUX11HB
Other manuals for CLUX-11HB
1
Table of contents
Other CYP Network Hardware manuals