Cypress CH-322 Installation manual

CH-322
3D Demultiplexer
Operation Manual
CH-322

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.0 January 2011
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
VR0 20120204 Preliminary Release

Table of Contents
1
1
1
1
2
3
4
4
4
5
6
1. Introduction ……………………..……………………...…........….…….
2. Applications …………………..………………….……...................…..
3. Package Contents ………………………...........……….................…
4. System Requirements ……………..……….........………............…….
5. Features …………………………………………......……........…...……
6. Specications ………………………………...……..........………....….
7. Operation Controls and Functions ……………...……..............……
7.1 Front Panel ..............................................................................
7.2 Rear Panel .…………………………………..…….......…...….…
8. Connection and Installation ….………………….........…..…..…......
9. Acronyms …......................................................................................

1. Introduction
3D contents are in fashion these days, this new Demultiplexer can bring the
3D contents through your existing display equipments. This 3D Demultiplexer
can split an HDMI 3D content into two HDMI content, one for left eye & one
for right with two 2D projectors to recreate the 3D content on the projection
screen. This new system can automatically detects the 3D or 2D content,
when demultiplexer detect the contents is 3D the system will check the
content is Side-by-Side or Frame Packing.
2. Applications
 3D source signal display on 2D TV
 3D source signal display through 2D projectors
3. Package Contents
 Demultiplexer x 1
 5V DC Power Adaptor x 1
 Operational Manual
4. System Requirements
 Input 3D source signal with HDMI splitter and output to two projectors
with polarized glasses.
 Input 3D source signal with connection cable and output to 2D LCD TV.
1

5. Features
 Support 3D content separations for Left/Right side
 Automatically detect 2D or 3D contents
 Automatically detect 3D contents is Side-by-Side or Frame Packing
 Input resolution support:
2D: 480i/p, 576i/p, 720p@50/60, 1080i@50/60 and 1080p@50/60
3D: 720p@50/60 (Frame Packing and Side-by-Side)
1080p@24 (Frame Packing)
 Output support 1080p@60Hz only
 One push button to select Left or Right side content
 For Frame Packing to perform 3D contents
 Convert 3D to 2D Contents
2

6. Specications
Input 1 x HDMI
Output 1 x HDMI
Input port resolution 2D: 480i/p, 576i/p, 720p@50/60, 1080i@50/60 and
1080p@50/60
3D: 720p@50/60 (Frame Packing and Side-by-Side)
1080p@24 (Frame Packing)
Output port Resolution 1080p@60Hz
ESD Protection Human Body Model: ±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 5V DC / 3A (US/EU standards,
CE/FCC/UL certified)
Dimensions (mm) 163 (W) x 165 (D) x 34(H)
Weight (g) 300
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 8.5W
3

7. Operation Controls and Functions
7.1 Front Panel
Power
L/TopR/Bottom
① ② ③
① Power switch & LED: Press this button to switch on the device and the LED
will illuminate in green. Press it again to set the device to standby mode
and the LED will illuminate in red.
② L/Top: Press this button to set one of the devices to send Left/Top side
image signal to the projector when displaying 3D contents through the 2D
projectors or 2D TV. When input is with 2D signal, leave this button free.
③R/Bottom: Press this button to set of the devices to send Right/Bottom
side image signal to the projector when display 3D contents through the
2D projectors or 2D TV. When input is with 2D signal, leave this button free.
7.2 Rear Panel
HDMI In
DC 5V
HDMI Out
① ② ③
① HDMI Out: This slot is to connect with TV/monitor display with HDMI input
jack and HDMI cable or HDMI to DVI converter cable.
② HDMI In: This slot is to connect with source equipment such as DVD/ Blu-
ray player with HDMI cable or DVI to HDMI converter cable.
③DC 5V: Plug the 5V DC power adaptor included in the package from the
AC wall outlet.
4

8. Connection and Installation
3D Demultiplexer control system
·Example 1:
·Example 2:
3D DVD
3D 2D
2D LCD TVCH-322
HDMI Out1
HDMI In
CLUX-12S
2D 2D
Projection Screen
HDMI
Ou
t
CH-322R/Bottom
Blu-ray3D DVD
or
3D Signal Source
HDMI Out2
 Polarizers
 Polarized Glasses
projector 1 projector 2
CH-322L/Top
5

Acronyms A
Acronym Complete Term
HDMI High-Definition Multimedia Interface
6

A

20110131 MPM-CH322
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.