D-Link DUB-E100 User manual

-1-
This Installation Guide includes instructions for:
§Windows XP
§Windows 2000
§Windows Me
§Windows 98/98se
Review Package Contents:
Make sure that the package contains the following items. If any items are
missing, please contact your reseller.
§D-Link DUB-E100
§USB 2.0 Certified Ato B Cable
§Drivers on CD-ROM
§This Installation Guide
Attach the DUB-E100 to your PC
A. With the computerturned
ON, attach the type B
connector ofthe supplied
USB 2.0 cable to the
DUB-E100’s USB type B
receptacle.
D-Link DUB-E100
USB 2.0 Fast Ethernet Adapter
Installation Guide
Type B

-2-
B. Plug the type USB type A
end of the USB 2.0 cable to
an available USB 2.0 port
on your computer or laptop.
C. Attach aCAT5 Ethernet
cable with an RJ-45
connector to the RJ-45 jack
of the DUB-E100.
D. Attach the other end of the
CAT5 Ethernet cable to a
switchor broadband
modem.
The below diagram illustrates a typical installation in a home environment.
Type A
RJ-45
RJ-45
TypeA
Type B
RJ-45
RJ-45
D
-
Link DUB
-
A2
D-Link DU-520

-3-
Windows XP/Me Driver Installation
A. Insert the DUB-E100 Driver CD into your CD-ROM drive.
B. Select “Next”.
C. Select “Continue Anyway”.
Windows Me users will not see
this screen.
D. Select “Finish”.
E. Windows Me users may be
asked to restart your computer.
Select “Yes” to restart your
computer and complete and
installation.

-4-
Windows 2000 Driver Installation
A. Insert the DUB-E100 Driver CD into your CD-ROM drive.
B. Select “Next”.
C. Select “Next”.
D. Make sure that “CD-ROM
drives” is the only option
checked and select “Next”.

-5-
E. Select “Next”.
F. Select “Yes”.
G. Select “Finish”.
H. Windows may ask you to restart your computer. After closing all
open programs, select “Yes” to restart your computer and complete
the installation. If it does not ask you to restart your computer, then
the DUB-E100 is ready to be used.

-6-
Windows 98/98SE Driver Installation
A. Insert the DUB-E100 Driver CD into your CD-ROM drive.
B. Select “Next”.
C. Select “Next”.
D. Put a check next to “CD-ROM
drive”, uncheck all other boxes
and select “Next”.

-7-
E. Select “Next”.
F. If prompted for the Windows 98
CD, insert the Windows 98 CD
into the CD-ROM drive and
select “OK”.
G. Specify the correct location of
the Windows 98 setup files in
the “Copy files from:” box. If
the CD-ROM drive is the “D”
drive, then type “D:\Win98”in
the box. Note: Some computers
mayhave these files in the “C:\Windows\options\cabs\”directory.
After typing in the location, select “OK”.Windows will copy the
necessary files.
H. Select “Finish”.
I. Windows may ask you to restart
your computer. Select “Yes”to
restart your computer to
complete the installation.

-8-
LED Indicator Description
The DUB-E100 features two LED indicators. The Link LED indicates that
there is an active connection between the DUB-E100 and the network and
the Tx/Rx LED indicates that data is being transferred.
§The Link LED is green when the DUB-E100 is operating at 100Mbps.
§The Link LED is amber when the DUB-E100 is operating at 10Mbps.
§The Tx/Rx (transmitting and receiving) LED flashes green when the
DUB-E100 is transmitting or receiving information.
If both LED’s are off, there is no connection. Check the network cables and
make sure that there is a physical connection between the DUB-E100, your
computer and your network.
Please refer to the “Networking Basics.PDF” file located on the Driver
CD for instructions and information on setting up your computer to
access a network and/or share printers and files.
Technical Support
D-Link provides free technical support for customers within the United
States during the warranty period. U.S. customers can contact D-Link
Technical Support through our web site, e-mail or by phone.
D-Link Technical Support over Telephone:
§1-877-45D-LINK or 1-877-453-5465
§24 Hours a Day, 7 Days a Week
D-Link Technical Support over the Internet:
§support.dlink.com
§[email protected]