D-Link COVR-2202 User manual

Simple Setup Guide
Tri Band Whole Home Wi-Fi System
COVR-2202
1
2
1
2
3
OR
x 2x 2
QIG
http://covr.local./
Wi-Fi
Wi-Fi
D-Link Wi-Fi
Download the D-Link Wi-Fi app from the
App Store or Google Play.
Open the app and tap Install Your Device. Next,
either scan the QR code in the Quick Install
Card, or select COVR-2202 from the list and
follow the on-screen instructions to complete
the setup.
When the Covr LED is blinking amber, connect
your PC or laptop to the Wi-Fi name (SSID)
printed on the back of the device, or on the
included Wi-Fi Configuration Card.
Type http://covr.local./ into a web browser
and follow the on-screen instructions to
complete the setup.
Connect the power adapter and plug in
the Covr Point labeled A.
11
A
There are two easy ways to set up your Covr Wi-Fi System:
D-Link Wi-Fi App Setup
Web Browser Setup
SSID:
Password:
QUICK INSTALL CARD

Version 1.00(US)_216x280 | 2018/03/23
Having trouble installing your new product? D-Link’s website contains the latest user documentation
and software updates for D-Link products. You can also contact D-Link Technical Support through our
website, or phone number below.
United States
Internet: http://support.dlink.com
Phone: [phone]
Technical Support
Place your Covr Points around your home to
extend your whole home Wi-Fi.
Check the LED indicator on your Covr Points
to ensure proper connection.
Covr Point Placement Guideline
Solid white: Strong signal.
Blinking orange: No signal. Move your
Covr Point closer to Covr Point A
until the LED turns solid white.
Blinking white: Weak signal. Move
your Covr Point closer to Covr Point
Auntil the LED turns solid white.