D-Link DIR-320NRU User manual

Quick Installation Guide
DIR-320NRU
Multifunction Wireless Router
Supporting WiMAX, 3G GSM/ DMA
with Built-in Switch

DIR-320NRU Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Wireless router DIR-320NRU
•Power adapter DC 5V/2A
•Ether et cable (CAT 5E)
•“Quick Installation Guide” (brochure).
If a y of the items are missi g, please co tact your reseller.
The “User Manual” a d “Quick Installation Guide” docume ts i Russia
a d E glish are available o D-Li k website (see ftp.dli k.ru/pub/Router/DIR-
320_NRU/Descriptio /Rev_B/1_4_0/).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address o wireless router 192.168.0.1
Username (login) admin
Password admin
Name o wireless network (SSID) DIR-320NRU
2

DIR-320NRU Quick Installation Guide
System Requirements and Equipment
•A computer with a y operati g system that supports a web browser.
•A web browser to access the web-based i terface of the router: Wi dows
I ter et Explorer, Mozilla Firefox, or Opera.
•A NIC (Ether et or Wi-Fi adapter) to co ect to the router.
•A 802.11b, g, or Wi-Fi adapter to create a wireless etwork.
•A USB modem to co ect to the I ter et1.
◦A WiMAX USB modem to co ect to the I ter et via a WiMAX
etwork.
!
Some WiMAX operators require subscribers to activate their WiMAX
USB modems prior to usi g them. Please, refer to co ectio
guideli es provided by your operator whe co cludi g the agreeme t
or placed o its website.
◦A 3G USB modem to co ect to the I ter et via a 3G GSM or
CDMA etwork.
!
Your USB modem should be equipped with a active ide tificatio
card (SIM or R-UIM) of your operator.
For CDMA USB modems, it is required to disable the PIN code check
o the ide tificatio card prior to co ecti g the USB modem to the
router.
1 Co tact your operator to get i formatio o the service coverage a d fees.
3

DIR-320NRU Quick Installation Guide
Supported USB Modems
GSM modems:
•Huawei E1550
•Huawei E160G
•Huawei E169G
•Huawei E171
•Huawei E220
•ZTE MF112
•ZTE MF192
•ZTE MF626
•ZTE MF627
•ZTE MF652
•ZTE MF668
•ZTE MF752.
CDMA modems2:
•Airplus MCD-650
•Airplus MCD-800
•A yDATA ADU-300A
•A yDATA ADU-310A
•Axesstel MV110
•Ubiquam UM-400
•WeTelecom WM-D200.
iMAX modem:
•Samsu g SWC-U200 (firmware versio u200_rev1-2.7.40-CI14).
!The ma ufacturer does ot guara tee proper operatio of the router
with every modificatio of the firmware of USB modems.
2 Performa ce of CDMA USB modems is ot tested for the curre t firmware versio .
4

DIR-320NRU Quick Installation Guide
CONNECTING TO PC
PC wit Et ernet Adapter
1. Make sure that your PC is powered off.
2. Co ect a Ether et cable betwee a y of LAN ports located o the back
pa el of the router a d the Ether et port of your PC.
3. To co ect via a WiMAX, 3G GSM or CDMA etwork: co ect your
USB modem to the USB port3 located o the back pa el of the router.
!If you eed to co ect or cha ge a USB modem to a other o e whe
the router is powered o , power off the router, co ect the modem to
the USB port, a d power o the router.
4. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
5. Tur o your PC a d wait u til your operati g system is completely
loaded.
Now you should co figure your PC to obtai a IP address automatically (as
DHCP clie t).
3 It is recomme ded to use a USB exte sio cable to co ect a USB modem to the
router.
5

DIR-320NRU Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > Network
and Internet Connections > Network Connections wi dow.
2. I the Network Connections wi dow, right-click the releva t Local
Area Connection ico a d select the Properties li e i the me u
displayed.
3. I the Local Area Connection Properties wi dow, o the General
tab, select the Internet Protocol (TCP/IP) li e. Click the Properties
butto .
6

DIR-320NRU Quick Installation Guide
4. Select the Obtain an IP address automatically a d Obtain DNS
server address automatically radio butto s. Click the OK butto .
5. Click the ОК butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
7

DIR-320NRU Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the Network and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the Network and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, right-click the releva t Local Area Connection
ico a d select the Properties li e i the me u displayed.
5. I the Local Area Connection Properties wi dow, o the
Networking tab, select the Internet Protocol Version 4 (TCP/IPv4)
li e. Click the Properties butto .
8

DIR-320NRU Quick Installation Guide
6. Select the Obtain an IP address automatically a d Obtain DNS
server address automatically radio butto s. Click the OK butto .
7. Click the OK butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
9

DIR-320NRU Quick Installation Guide
PC wit Wi-Fi Adapter
1. To co ect via a WiMAX, 3G GSM or CDMA etwork: co ect your
USB modem to the USB port4 located o the back pa el of the router.
!If you eed to co ect or cha ge a USB modem to a other o e whe
the router is powered o , power off the router, co ect the modem to
the USB port, a d power o the router.
2. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
3. Tur o your PC a d wait u til your operati g system is completely
loaded.
4. Tur o your Wi-Fi adapter. As a rule, moder otebooks with built-i
wireless NICs are equipped with a butto or switch that tur s o /off the
wireless adapter (refer to your PC docume ts). If your PC is equipped
with a pluggable wireless NIC, i stall the software provided with your
Wi-Fi adapter.
Now you should co figure your Wi-Fi adapter.
4 It is recomme ded to use a USB exte sio cable to co ect a USB modem to the
router.
10

DIR-320NRU Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > Network
and Internet Connections > Network Connections wi dow.
2. Select the ico of the wireless etwork co ectio a d make sure that
your Wi-Fi adapter is o .
3. Search for available wireless etworks.
4. I the ope ed Wireless Network Connection wi dow, select the
wireless etwork DIR-320NRU a d click the Connect butto .
After that the Wireless Network Connection Status wi dow appears.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
11

DIR-320NRU Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the Network and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the Network and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, select the ico of the wireless etwork co ectio
a d make sure that your Wi-Fi adapter is o .
5. To ope the list of available wireless etworks, select the ico of the
wireless etwork co ectio a d click the Connect To butto or left-
click the etwork ico i the otificatio area located o the right side of
the taskbar.
12

DIR-320NRU Quick Installation Guide
6. I the ope ed wi dow, i the list of available wireless etworks, select the
wireless etwork DIR-320NRU a d click the Connect butto .
7. Wait for about 20-30 seco ds. After the co ectio is established, the
etwork ico will be displayed as the sig al level scale.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
13

DIR-320NRU Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. I the address bar of the web browser, e ter the IP address of the router
(by default, the followi g IP address is specified: 192.168.0.1). Press
the Enter key.
3. O the ope ed page, e ter the user ame a d password for the
admi istrator accou t i the Login a d Password fields
correspo di gly (by default, the followi g user ame a d password are
specified: admin, admin). The click the Enter li k.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to re ote server ”) occurs upo co ecti g to
the web-based i terface of the router, make sure that you have properly
co ected the router to your computer.
14

DIR-320NRU Quick Installation Guide
Right after the first access to the web-based i terface you are forwarded to the
page for cha gi g the admi istrator password specified by default.
E ter a ew password i the Password a d Con irmation fields (you may
use digits, Lati letters (uppercase a d/or lowercase), a d characters available
o the keyboard), the click the Save li k.
!
Remember or write dow the ew password for the admi istrator
accou t. I case of losi g the ew password, you ca access the setti gs
of the router o ly after restori g the factory default setti gs via the
hardware RESET butto . This procedure wipes out all setti gs that you
have co figured for your router.
15

DIR-320NRU Quick Installation Guide
After successful registratio the router's quick setti gs page ope s.
The web-based i terface of the router is multili gual. Select a eeded la guage
from the me u displayed whe the mouse poi ter is over the Language
captio . You ca cha ge the la guage of the web-based i terface i a y me u
item.
After selecti g the la guage, the otificatio o u saved cha ges will be
displayed. Click the Save ico ( ) to save the curre t la guage of the
web-based i terface as the default la guage.
16

DIR-320NRU Quick Installation Guide
The quick setti gs page displays ge eral i formatio o the router a d its
software (the versio a d the date of the firmware, the IP address of the
device, the ame of the WLAN, etc.).
O the quick setti gs page, you ca quickly get to some pages of the web-
based i terface or ru a eeded Wizard (use the li ks o the left side of the
page).
From the quick setti gs page you ca switch to the adva ced setti gs sectio .
To do this, click the Advanced settings li k i the bottom right cor er of
the page.
Also you ca fi d a specific page via search. To do this, e ter the ame of the
page, wholly or partly, i the search bar i the top part of the web-based
i terface page, a d the select a eeded li k i the search results.
17

DIR-320NRU Quick Installation Guide
Configuring Connection to t e Internet
!
You should co figure your WAN co ectio i accorda ce with data
provided by your I ter et service provider (ISP). Make sure that you
have obtai ed all ecessary i formatio prior to co figuri g your
co ectio . Otherwise co tact your ISP.
WiMAX WAN Connection
1. If your operator specified a ide tifier for the WiMAX etwork, proceed
to the WiMAX / In ormation page, e ter the required value i the SSID
field a d click the Connect butto .
2. Go to the Net / WAN page a d click the Add butto .
3. I the General settings sectio , i the Provider drop-dow list, leave
the Manually value.
4. From the Connection Type drop-dow list, select the eeded value.
5. From the Port drop-dow list, select the USB-WIMAX value.
6. Specify a ame for your co ectio (a y ame for easier ide tificatio ) i
the Name field.
7. For connection of PPPoE type: i the PPP sectio , e ter authorizatio
data provided by your ISP (the user ame (logi ) i the Username field
a d the password i the Password a d Password con irmation
fields), or select the Without authorization checkbox if authorizatio
is ot required.
18

DIR-320NRU Quick Installation Guide
8. For connection of Static IP type: i the IP sectio , fill i the IP
Address, Netmask, Gateway IP address, a d Primary DNS
server fields.
9. For connection of Dynamic IP type: if your ISP has provided the address
of the DNS server, i the IP sectio , deselect the Obtain DNS server
addresses automatically checkbox a d fill i the Primary DNS
server field.
19

DIR-320NRU Quick Installation Guide
10. For connection of PPTP + Static IP or L TP + Static IP type: i the IP
sectio , fill i the IP Address, Netmask, Gateway IP address, a d
Primary DNS server fields. The i the VPN sectio , e ter
authorizatio data provided by your ISP (the user ame (logi ) i the
Username field a d the password i the Password a d Password
con irmation fields), or select the Without authorization checkbox if
authorizatio is ot required. I the VPN server address field, e ter
the IP or URL address of the PPTP or L2TP authe ticatio server. If your
ISP applies e cryptio , select a eeded value from the Encryption drop-
dow list.
20