D-Link DIR-605L User manual

ENGLISH
5V
RESET
1A
INTERNET12LAN34
5V
RESET
1A
INTERNET12LAN34
DIR-605L
If any of the above items are missing, please contact your reseller.
DIR-605L Wireless N300 Cloud Router
Power Adapter
Ethernet Cable
Quick Install Guide
1Power LED A solid green light indicates a proper connection to the
power supply.
2Internet LED
A solid green light indicates a proper connection to
your broadband modem. The light will blink during data
transmission.
3WPS LED The light will blink during the WPS process.
4Wireless LED A solid green light indicates that the wireless segment is
ready.The light will blink during data transmission.
5LAN LEDs (1-4) A solid green light indicates a connection to an Ethernet
device. The LED will blink during data transmission.
6WPS Button Press to start the WPS process.The WPS LED will start to blink.
7LAN Ports (1-4) Connect Ethernet devices such as computers, switches,
and game consoles.
8Internet Port Connect your broadband modem to this port using an
Ethernet cable.
9Power Port Connect the supplied power adapter.
10 Reset Button Press and hold the reset button with a paper clip for six
seconds to reset the router to the factory default settings.
1 3 5 7 8 9
1Unplug the power to your DSL or Cable modem.
2Connect an Ethernet cable from the Internet port of the router to the
Ethernet port on your DSL or Cable modem.
3Connect another Ethernet cable from the Ethernet port on your computer
to one of the LAN ports on the router.
4Plug the power back into your DSL or cable modem. Please wait about one
minute before continuing.
5Plug the power adapter into your router and connect to an available power
outlet or surge protector.
Modem
DIR-605L
Computer
Modem DIR-605L
Computer
Package Contents
Hardware Overview Minimum Requirements Connect your Router
5V
RESET
1A
INTERNET12LAN34
6After the router has powered up, verify that the Power and Internet LEDs are
both lit then continue with the Conguration section on the other side.
Modem DIR-605L
Computer
5V
RESET
1A
INTERNET12LAN34
4
T
R
Modem
DIR-605L
Ethernet Port
Ethernet Cable
Internet Port
Ethernet Cable
• Users with DSL providers - If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
• Users with Cable providers - Make sure you unplug the power to your modem.
In some cases, you may need to turn it o for up to 5 minutes.
•Advanced Users - If your ISP provided you with a modem/router combo, you will
need to set it to “bridge” mode so the DIR-605L router can work properly. Please
contact your ISP or refer to the user manual for your modem/router device.
Before you Start
Network Requirements:
• An Ethernet-based broadband modem
Web-based Conguration Requirements:
Computer with the following:
• Windows® or Mac OS® X operating system
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
mydlink Requirements:
• iPhone/iPad/iPod Touch (iOS 3.0 or higher)
• Android device (1.6 or higher)
• Web Browser Requirements:
• Internet Explorer 7 or higher
• Safari 5 or higher
• Chrome
• Firefox
Note: To learn more about mydlink, visit http://www.mydlink.com.
If you experience issues registering this Router with your mydlink account, try
performing a hard reset byusing an unfolded paperclip to pressand hold the reset
button for 10seconds while the Router ispowered on. This may be necessary ifyou
have purchased an open box or resold unit.
2
10
6
Wireless N300
Cloud Router
4

ENGLISH
If you have selected Manual Setup or if the router did not detect your
Internet connection, select the Internet type from the Internet Connection
drop-down menu.
4
Under Wireless Settings, enter a name for your wireless network (also called
SSID or Wi-Fi Network name). Then, next to Security Mode, select AUTO-WPA/
WPA2 (recommended). Enter a network key (also know as a passphrase or
Wi-Fi Password).
You may check the Auto generate network key box to have the router
create a password for you.
Click Next to continue. Your router will now reboot for about 30 seconds.
5
Scan the code below or search “QRS Mobile” (App Store or Google Play) to
download the QRS Mobile App to your iPhone, iPad, or Android device.
Once connected, click on the QRS Mobile icon from your mobile device,
then click Start to continue. Please follow the on-screen instructions to
complete the setup.
Once the Setup Complete screen appears, click Save and write down the
new Wi-Fi Network name and password for future reference.
Note: To reconnect to your router, launch your wireless utility, select the new
Wi-Fi Network you created, and then enter your new Wi-Fi password.
1
3
4
Copyright©2013 D -Link Corporation/D-Link Systems,Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries. iPhone,iPad, and iPod touch are registered trademarks of Apple
Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate
derived from IEEE Standard802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental factors will adversely aect wireless signal range. Product specications, size and shape are subject to change
without notice, and actual product appearance may dier from that depicted on the packaging.Visit ww w.dlink.comfor more details. Version 2.1 | March 20, 2013
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States
Telephone: [phone]
Internet: http://support.dlink.com
Canada
Telephone: [phone]
Internet: http://support.dlink.ca
DSL (PPPoE) users enter your PPPoE user name and password supplied by
your ISP. If you do not know this information, please contact your ISP.
Once your app is installed, you may now congure your router. Connect
to the router wirelessly by going to your wireless utility on your device.
The default Wi-Fi Network is dlink. Select it and connect.
Note: By default, the DIR-605L does not have any wireless security enabled. It
is strongly suggested to enable security and create a Wi-Fi Password during the
setup wizard to secure your wireless network.
2
How do I connect my wireless devices to the DIR-605L router?
1. Open your wireless network utility that displays available wireless networks.
2. Select the Wi-Fi Network name you assigned in the wizard and connect.
Note: If you did not run the setup wizard or you reset the router to its default
settings, the default Wi-Fi Network name is dlink with no password.
You can also connect using WPS:
1. Press the WPS button on the DIR-605L for three seconds.
2. Within one minute press the WPS button on your wireless device.
3. Allow up to two minutes to connect.
Note: Some devices may require you to log in to a utility to start the WPS process.
Refer to the user manual of the device you want to connect to the router if you do
not know how to start the WPS process.
How do I change the wireless settings on the DIR-605L router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local./. You can also enter the IP address of the
router (http://192.168.0.1).
2. At the login screen, type in admin for the user name and enter the router
password you created in the wizard (no password by default).
3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to
create a new Wi-Fi network name (SSID) and Wi-Fi password.
Documentation available at http://www.dlink.com/DIR-605L.
iOS Android
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local. /. You can also enter the IP address of the
router (http://192.168.0.1).
1
There are two ways to congure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.
When the Welcome screen appears, select your language and then click
Start to continue.
2
A. Web Browser Conguration
Select Auto Detect and click Next to continue.
3
Continue with the Setup Wizard to nish conguring your DIR-605L router.
Note: Setting up “mydlink” is optional and not required for the router to function.
Congratulations!You have completed the router installation.
Conguration B. QRS Mobile Setup Troubleshooting
Technical Support
6
QRS Mobile App
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”) or GNU Lesser
General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
Written Oer for GPL and LGPL Source Code
Where such specic license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail
the applicable GPL and LGPLsource code les via CD-ROM for a nominal cost to
cover shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email:
[email protected]
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
GPL Code Statement
The router will automatically detect the type of connection are you using.