D-Link DWR-730 User manual

For DWR-730 HSPA+MOBILE ROUTER
www.dlink.co.in
CONFIGURATION GUIDE

Configuration Guide
for DWR-730
GETTING
STARTED
1MANUAL
SETTING
3
WIFI
SETTING
2
4

DWR-730 CONFIGURATION GUIDE
Open the flap of the router from behind,
remove the battery and insert the SIM card.
Then switch on the device. By default the
Router is in “Auto” mode so the SIMcard gets
directly detected and internet will be
available without doing any further setting.
In order to access the internet you have to
connect to DWR 730 wirelessly. The default
wireless settings i.e. Wireless network name
and password will provided with the device.
From your wireless device scan for the
available wireless networks and connect to
the DWR 730 by the default given password
provided with the device.
GETTING
STARTED
step1

DWM 156 CONFIGURATION GUIDE
Now in order to change the default Wi-Fi
name and Password you will have to Log in to
the device. Keeping connected to the device
wirelessly,type in your Web Browser
192.168.0.1then the default login page will
appear. Type in username: admin and
password: (blankdon’t enter any thing)
WIFI
SETTING
step 2

DWR-730 CONFIGURATION GUIDE
After you login the default webpage will
appear.
WIFI
SETTING
step 2

DWR-730 CONFIGURATION GUIDE
Then Go to“Wi-Fi”
Now when you do save this setting you will get
disconnected from Wi-Fi then you should again
scan and connect to the new personalized Wi-Fi
network created by you.
Now You can give a personalized name that you
like to the DWR-730 Wi-Fi by typing in the
required name in the section“SSID”and you can
give your own password by typing in the
required password in the section “Pre-Shared
Key”and then click on “Apply”.
step 2WIFI
SETTING

DWR-730 CONFIGURATION GUIDE
In case if you are facing issue with auto
connection, you can create a manual profile
and connect to the manually created
network. Go to “Internet”-“Connection”.
Select “Preferred Cellular Network” to Manual
and click on “Change” and thengo to
“Internet” –“Connection”-“User Profile” and
add a manual profile. You will have to give the
APN according to the SIM card that you are
using.
step 3MANUAL
SETTING

DWR-730 CONFIGURATION GUIDE
Now come back again to “Connection
Operation” then click on the profile you have
created which will appear on the list and click
on “Set”. Then you will be connecting to the
manually created network.
step 3MANUAL
SETTING

DWR-730 CONFIGURATION GUIDE
step 3MANUAL
SETTING