D3 S SERIES User manual

CAUTION!

Changesormodi󽗉cationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe
user’sauthoritytooperatetheequipment.

ThisUserGuideincludesdetailedusageinstructionsforyourproduct.Pleasereadthisguidethoroughly.

FiguresandillustrationsinthisUserGuideareprovidedforreferenceonlyandmaydifferfromactual
equipmentappearance.Equipmentdesignandspeci󽗉cationsmaybechangedwithoutnotice.
Please read this guide carefully before operating your set and retain it for future reference.
ECONOMY MODEL 60", 70"
IFTD S SERIES
User Guide

32
Important Safety Instructions
The slots and openings in the product are provided for necessary ventilation. To ensure reliable
operation of this product, and to protect it from overheating, these slots and openings must never
be blocked or covered.
Do not cover the slots and openings with a cloth or other materials.
Do not block the slots and openings by placing this product on a bed, sofa, rug or other similar
surface.
Do not place this product in a confined space, such as a bookcase, or built-in cabinet, unless
proper ventilation is provided. This product’s heat dissipation is based only on use in landscape.
Therefore, it should only ever be used in landscape. Do not use this product in portrait or
horizontally.
Do not place this product near or over a radiator or heat resistor, or where it is exposed to direct
sunlight.
Do not place heat generating items such as candles, ashtrays, incense, flammable gas or
explosive materials near this product.
Do not place a water containing vessel on this product, as this can result in a risk of fire or electric
shock. Do not expose this product to rain or place it near water or in a wet environment (near a
bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool
etc.). If this product accidentally gets wet, unplug it and contact an authorized dealer immediately.
This product uses batteries. In your community there might be regulations that require you to
dispose of these batteries properly under environmental legislations. Please contact your local
authorities for disposal or recycling information.
Important Safety Instructions
The illustrations may differ slightly from the items shipped with your product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL ONLY.
CAUTION
THERE IS A RISK OF EXPLOSION OR FIRE IF THE
BATTERY IS AN INCORRECT TYPE. PLEASE DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS
PROVIDED AND LOCAL OR NATIONAL LAWS.
Do not exceed the standard capacity of a multi-plug or power outlet extension when using it for
this product. There is a danger of an electric shock or a fire hazard.
To protect this apparatus from a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the electric outlet. This will prevent damage to the set due to
lightning and/or power line surges.
Use your common sense when operating this product. Never insert anything metallic into the
open parts of this product. Doing so may result in an electric shock and/or serious injury.
To avoid electric shock, never touch the inside of this product. Only a qualified technician should
open this product. If there is a fault with this product do not attempt to fix it yourself; unless you
are a qualified technician.
Do not touch the power cord with wet hands. There is a danger of an electric shock.
Plug the power cord firmly into the power outlet. Failure to do so may cause a fire hazard.
Do not unplug the power cord by pulling the cable only. If the cord is damaged, it may cause an
electric shock.
If this product does not operate normally - in particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact an authorized dealer or service center. In
addition, to prevent image burn, please use the screensaver whenever possible.
Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are
to leave the product for an extended period of time. Accumulated dust can cause an electric
shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the
insulation to deteriorate.

54
Contents
Getting Started …………………………… 6
Unpacking ………………………………6
Button Configuration ………………7
Connection Ports ………………………8
Remote Control ………………………9
Basic Functions …………………………… 10
Turning On/Off the D3 IFTD
External Devices &
Touch Functionality ………………… 10
Adjusting the Volume Level ……… 11
Mute Function ……………………… 11
Selecting an Input Source ………… 11
Picture Control……………………………… 12
Adjusting Picture Mode…………… 12
Adjusting Advanced Video Settings … 13
Sound Control ……………………………… 14
Adjusting Sound Settings ……… 14
Setup Control ……………………………… 15
Using the Setup Menu …………… 15
PC Settings ………………………………… 16
Adjusting the PC Screen ………… 16
Important Safety Instructions
Be sure to contact an authorized service center, when installing your product in a location with
heavy dust, high or low temperatures, high humidity, chemical substances and where it operates
continuously for 24 hours such as an airport, a train station etc. Failure to do so may cause serious
damage to your product.
Do not allow children to hang off the product or climb onto it. If it is mounted on a stand or onto
a wall the extra weight may cause the product to tip or fall.
Store the accessories (battery, bolts, screws etc. ) in a location safely out of the reach of children.
Do not install the product in an unstable location such as on a weak wall, a slanted floor or a
location exposed to vibrations. If this product is to be mounted onto a wall, first check that the
wall can hold the weight of the product safely.
Do not drop or impart any shock to the product. If the product is damaged, disconnect the power
cord and contact a service center immediately.
As a precautionary measure please make sure that you pull out the power cord from the outlet
before cleaning the product.
Please take a common sense approach to installing and operating this product.

Getting Started
76
Getting Started
Unpacking
The following items are included in your product box.
The illustrations may differ slightly from the items shipped with your product.
Button Configuration
①INPUT Display all input sources
②MENU Display menu
③VOL ▲/▼
1) Outside menu screen: Adjust the volume.
2) Inside menu screen: Adjust, select and navigate the menu
settings & options
④CH ▲/▼ Adjust, select and navigate menu options
⑤POWER Turn power On/Off
⑥USB INPUT Extra USB inputs
Remote Control
with Battery
AC Power Cable User Manual
Touch Sensor USB Cable
HDMI Cable
D3 IFTD
① INPUT
② MENU
③ VOL ▲/▼
④ CH ▲/▼
⑤POWER
⑥⑥
⑦

Getting Started Getting Started
8 9
Remote Control
①AC INPUT Connect the power cord to this AC Input.
②USB (Upgrade) Used for upgrades only.
③Display Port Connect a Display Port device to this port.
④HDMI 1, 2 Connect HDMI devices to these ports.
⑤Digital Audio Output Connect an audio component via optical digital audio.
⑥Audio In (VGA) Connect a VGA audio input to this port.
⑦VGA Connect a VGA device to this port.
⑧Component Video Connect a component video device to this port.
⑨Audio In Connect for analog audio.
⑩Composite Video Connect a composite video device to this port.
⑪Sensor USB Connect to external device to enable touch functionality.
Connection Ports
Full HD Display ②
③
④
⑤
⑨
⑩
⑫
⑥
⑦
⑧
⑪
⑬
① ② ③ ④ ⑤ ⑥ ⑧⑦ ⑨ ⑩ ⑪
Audio In
(VGA)
VGA Audio In
o
①
①Power On/Off
②Input Source Options
③Numeric Input and Chanel Change.
④Menu & Navigation Options
⑤Volume +/-
⑥Input Source Options
⑦Channel </>
⑧Mute
⑨Audio, Screen & Picture Options
⑩IFTD Options
⑪Sleep Mode Options
⑫Freeze Screen On/OFF
⑬Input Source Options

Basic Functions
1110
① ② ③ ④ ⑤ ⑥ ⑧⑦ ⑨ ⑩ ⑪ ⑫ ⑬
Audio In
(VGA)
VGA Audio In
Basic Functions
Turning On/Off the D3 IFTD
Standby Setup: The AC power cord must be set up and connected to get the D3 IFTD in
standby mode, ready to be turned on.
Press the Power button on the front of the display to turn the D3 IFTD On/Off.
1. If the D3 IFTD is in standby mode, press the Power button on the remote control or D3 IFTD
to turn it ON.
2. Press the Power button again on the remote control, or the D3 IFTD itself, to turn the D3
IFTD OFF.
External Devices and Touch Functionality
If you want to use an external device in conjunction with the touch functionality of the D3 IFTD it is
important that you connect your external device to the display using an applicable cable AND the
Touch Sensor USB cable . If you do not connect the Touch Sensor USB cable you will not be able
to use the external device in conjunction with the touch functions of the D3 IFTD.
Adjusting the Volume Level
Press the VOL +/- buttons to adjust the sound level.
Volume level: 0 ~ 100
Mute Function
You can mute the audio sound via the remote control.
1. Press the MUTE button on the remote control to temporarily silence the audio.
2. When mute is ON, press the MUTE button again on the remote control to resume the audio.
Selecting an Input Source
You can change the input source through the Input Source menu.
1. Press the INPUT button on the D3 IFTD or remote control to display input source options.
AV
Component
PC
HDMI1
HDMI2
DisplayPort
InsidePC
USB
INPUT SOURCE
2. Press the ▲/▼ buttons on the remote control to select an input source.
3. Press the OK button to accept your selection.
ApplicableCable Touch Sensor USB Cable
Power On/Off
Volume 20
+/- Buttons
Mute
Volum

Picture Control
1312
Picture Control
Adjusting Picture Settings
In the Picture Menu you can adjust the picture settings of the D3 IFTD. As well as adjusting the
picture settings manually, you can also choose between a variety of preset options.
1. Press the MENU button to display the Main Menu.
2. Press the ▲/▼ buttons to select the Picture Menu, and then press the OK button.
3. Press the ▲/▼ buttons to select the desired picture options.
(Picture Mode, Contrast, Brightness, Color or Sharpness)
Select Move Exit
Picture Mode 〈 Standard 〉
Contrast 50
Brightness 50
Color 50
Sharpness 0
Advanced Video 〉
4. Press the ▲/▼ buttons to make the appropriate adjustments.
5. Press the EXIT button to return to the D3 IFTD or press the MENU button
to return to the previous menu.
Picture Mode Options
Picture Mode
Select a preset Picture Mode (Standard, Theater, Custom, Vivid).
Contrast
Adjust the contrast.
Brightness
Increases or decreases the brightness of the picture.
Color
Adjust the intensity of all colors.
Sharpness
Adjust the level of sharpness in the picture.
Adjusting Advanced Video Settings
1. Press the MENU button to display the Main Menu.
2. Press the ◄/►buttons to select the Picture Menu, and then press the OK button.
3. Press the ▲/▼ buttons to select Advanced Video, and then press the OK button.
Select Move Exit
Color Temperature 〈 Normal 〉
Zoom Mode 〈Original 〉
Noise Reduction 〈 Auto 〉
Adaptive Contrast 〈On 〉
4. Press the ▲/▼ button to select menu items.
5. Press the EXIT button to return to the D3 IFTD or press the MENU button
to return to the previous menu.
Advanced Video Options
Color Temperature
Select one of the three preset colour options (Warm, Normal, Cool).
Zoom Mode
Select the zoom mode according to the input source (Wide, Zoom, Cinema, Original, Normal).
Noise Reduction
Reduces any noise on the screen.
Adaptive Contrast
Adjust the screen contrast automatically.

14 15
Sound Control
Adjusting Sound Settings
In the Sound Menu you can adjust the sound settings of the D3 IFTD. As well as adjusting the
sound settings manually, you can also choose between a variety of preset options.
1. Press the MENU button to display the Main Menu.
2. Press the ◄/►buttons to select the Sound Menu, and then press the OK button.
3. Press the ▲/▼ buttons to select the menu items.
4. Press the EXIT button to return to the D3 IFTD or press the MENU button
to return to the previous menu.
Sound Mode Options
Sound Mode
Select a preset Sound Mode (Standard, News, Music, Movie, Custom).
Treble
Adjust tones of high frequency.
Bass
Adjust tones of low frequency.
Balance
Adjust the balance between the right and left speakers.
AVC
Equalize the volume level on each program.
Digital Output
Select the Digital Audio output format. Choose between PCM or RAW.
Select Move Exit
Sound Mode 〈 Standard 〉
Bass 50
Treble 50
Balance 50
AVC 〈 Off 〉
Digital Output 〈 PCM 〉
Setup Control
Using the Setup Menu
1. Press the MENU button to display the Main Menu.
2. Press the ◄/►buttons to select the Sound Menu, and then press the OK button.
3. Press the ▲/▼ buttons to select the menu items.
Select Move Exit
Time 〉
Menu Settings 〉
PC Settings 〉
Other Settings 〉
Restore Default 〉
4. Press the EXIT button to return to the D3 IFTD or press the MENU button
to return to the previous menu.
Setup Options
Time
Adjust the Off Timer and determine how long after "no signal" is detected that the
D3 IFTD turns off
automatically.
Menu Settings
Adjust the transparency of the main menu (0, 25, 50, 75, 100%), and select the menu language.
PC Settings
Adjust the PC settings when connected through VGA (See below).
Other Settings:
Adjust the internal speakers, variable audio settings, key lock settings and HDMI mode options.
Internal Speaker
Enable/Disable internal speakers.
Restore Default
Restore the
D3 IFTD to factory settings.

16 17
PC Settings
Adjusting the PC Screen
If an external PC is connected, through a VGA connection, you may need to adjust the screen or
set the Clock and/or Phase. This can be done manually or automatically.
1. Connect your PC to the D3 IFTD via a VGA cable.
2. Go to the Input Source menu and select PC.
3. Press the MENU button to display the main menu.
4. Press the ◄/►buttons to select the Setup menu, and then press the OK button.
5. Press the ▲/▼ button to select PC Settings, and then press the OK button.
Select Move Exit
H-Position 50
V-Position 34
Clock 50
Phase 5
Auto 〉
6. Press the ▲/▼ button to select the items.
7. Press the EXIT button to return to the D3 IFTD or press the MENU button
to return to the previous menu.
PC Settings Options
H-Position and V-Position
If the screen is skewed towards a specific direction, try to adjust the position by using this option.
Clock
This function will help remove or reduce flickering on the screen, unstable boundaries, unnecessary noise
or blurring of the screen.
Phase
If adjusting the Clock does not remove unnecessary noise, try to adjust the Phase with this option.
Auto
The Position, Clock and Phase values can be adjusted automatically.
Notes

www.D3world.net
Date of Purchase
Hambakenwetering 9 | 5231 DD 's-Hertogenbosch | The Netherlands | T: [phone] | [email protected] | www.d3bydigizoo.com