Daewoo DLP-26C2 User manual

LCD TELEVISION
INSTRUCTION MANUAL
DLP-26C2
DLP-26C3
DLP-32C2
DLP-32C3
DLP-32C6

Caution
2
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Disposal of Used lectrical & lectronic quipment [ urope only]
The me ning of the symbol on the product, its ccessory or p ck ging indic tes th t this product
sh ll not be tre ted s household w ste. Ple se, dispose of this equipment t your pplic ble collec-
tion point for the recycling of electric l & electronic equipments w ste. In the Europe n Union nd
Other Europe n countries which there re sep r te collection systems for used electric l nd elec-
tronic product. By ensuring the correct dispos l of this product, you will help prevent potenti lly
h z rdous to the environment nd to hum n he lth, which could otherwise be c used by unsuit ble
w ste h ndling of this product. Therecycling of m teri ls will help conserve n tur l resources.
Ple se do not therefore dispose of your old electric l nd electronic equipment with your household
w ste. For more det iled inform tion bout recycling of this product, ple se cont ct your loc l city
office, your household w ste dispos l service or the shop where you purch sed the product.
CAUTION
RISK OF L CTRIC SHOCK
DO NOT OP N
CAUTION : TO R DUC TH RISK OF L CTRIC SHOCK,
DO NOT R MOV COV R (OR BACK).
NO US R-S RVIC ABL PARTS INSID .
R F R S RVICING TO QUALIFI D S RVIC P RSONN L.
The lightning fl sh with rrowhe d symbol, within n equil ter l
tri ngle, is intended to lert the user to the presence of uninsul t-
ed “d ngerous volt ge” within the product’s enclosure th t m y
be of sufficient m gnitude to constitute risk electric shock.
The excl m tion point within n equil ter l tri ngle is intended to
lert the user to the presence of import nt oper ting nd servic-
ing instructions in the liter ture ccomp nying the ppli nce.

Important
Safeguards
3
Ple se re d the following s fegu rds for your TV nd ret in for future reference.
Alw ys follow ll w rnings nd instructions m rked on the television.
1. Read, Retain and Follow All Instructions
Re d ll s fety nd oper ting instructions before oper ting the TV. Ret in them s fely
for future reference. Follow ll oper tions nd instructions ccordingly.
2. Heed Warnings
Adhere to ll w rnings on the ppli nce nd in the oper ting instructions.
3. Cleaning
Unplug the TV from the w ll outlet before cle ning. Do not use liquid, br sive, or erosol cle ners.
Cle ners c n perm nently d m ge the c binet nd screen. Use lightly d mpened cloth for
cle ning.
4. Attachments and quipment
Never dd ny tt chment nd/or equipment without pprov l of the m nuf cturer s such dditions m y
result in the risk of fire, electric shock or other person l injury.
5. Water and Moisture
The pp r tus sh ll not be exposed to dripping or spl shing nd th t no objects filled with liquids,
such s v ses, sh ll be pl ced on the pp r tus.
6. Setting
Do not pl ce this TV on n unst ble c rt, st nd or t ble. Pl cing the TV on n unst ble b se c n
c use the TV to f ll, resulting in serious person l injuries s well s d m ge to the TV. Use only
c rt, st nd, br cket or t ble recommended by the m nuf cturer or s lesperson.
7. Ventilation
Slots nd openings in the c binet re provided for ventil tion nd to ensure reli ble oper tion of the TV nd to
protect it from overhe ting. Do not cover the ventil tions openings in the c binet nd never pl ce the set in confined
sp ce such s built-in c binet unless proper ventil tion is provided. Le ve minimum 10 cm g p ll round the unit.
8. Power Source
This TV should be oper ted only from the type of power source indic ted on the m rking l bel. If you re not
sure of the type of power supplied to your home, consult your ppli nce de ler or loc l power comp ny.
9. Grounding or Polarization
This TV is equipped with pol rized ltern ting current line plug ( plug h ving one bl de wider th n the other). This
plug will fit into the power outlet only one w y. This is s fety fe ture. If you re un ble to insert the plug fully into
the outlet, try reversing the plug. If the plug should still f il to fit, cont ct your electrici n to repl ce your obsolete
outlet. Do not defe t the s fety purpose of the pol rized plug. A w rning th t n pp r tus with CLASS I construction
sh ll be connected to MAINS socket outlet with protective e rthing connection.
10. Power-Cord Protection
Power-supply cords should be routed so th t they re not likely to be w lked on or pinched by items pl ced
upon or g inst them, p ying p rticul r ttention to cords t plugs, w ll outlets, nd the point
where they exit from the TV. MAINS plug is used s the disconnect device, the disconnect device sh ll rem in re dily oper ble.
11. Lightning
For dded protection for this TV during lightning storm, or when it is left un ttended nd unused for long
periods of time, unplug it from the w ll outlet nd disconnect the ntenn or c ble system. This will prevent
d m ge to the TV due to lightning nd power-line surges.
12. Wall or Ceiling Mounting
When mounting the product on w ll or ceiling, be sure to inst ll the product using the design ted
mounting tool ccording to the method recommended by the m nuf cturer.

Important
Safeguards
4
13. Power Lines
An outside ntenn system should not be loc ted in the vicinity of overhe d power lines or other electric light
or power circuits, or where it c n f ll into such power lines or circuits. When inst lling n outside ntenn
system, extreme c re should be t ken to keep from touching such power lines or circuits s cont ct with
them might be f t l.
14. Overloading
Do not overlo d w ll outlets nd extension cords s this c n result in risk of fire or electric shock.
15. Object and Liquid ntry
Never push objects of ny kind into this TV through openings s they m y touch d ngerous volt ge points or
short-out p rts th t could result in fire or electric shock. Never spill liquid of ny kind on or into the TV.
16. Outdoor Antenna Grounding
If n outside ntenn or c ble system is connected to the TV, be
sure the ntenn or c ble system is grounded so s to provide
some protection g inst volt ge surges nd built-up st tic ch rges.
Section 810 of the N tion l Electric Code, ANSI /NFPA No. 70-1984,
provides inform tion with respect to proper grounding of the m st
nd supporting structure, grounding of the le d in wire to n ntenn
disch rge unit, size of grounding conductors, loc tion of
ntenn disch rge unit, connection to grounding electrodes, nd
requirements for the grounding electrode.
17. Servicing
Do not ttempt to service this TV yourself s opening or removing covers m y expose you to d ngerous
volt ge or other h z rds. Refer ll servicing to qu lified service personnel.
18. Damage Requiring Service
Unplug the TV from the w ll outlet nd refer servicing to qu lified service personnel under the following
conditions:
( ) When the power-supply cord or plug is d m ged.
(b) If liquid h s been spilled, or objects h ve f llen into the TV.
(c) If the TV h s been exposed to r in or w ter.
(d) If the TV does not oper te norm lly by following the oper ting instructions. Adjust only those controls
th t re covered by the oper ting instructions s n improper djustment of other controls m y result in
d m ge nd will often require extensive work by qu lified technici n to restore the TV to its norm l oper tion.
(e) If the TV h s been dropped or the c binet h s been d m ged.
(f) When the TV exhibits distinct ch nge in perform nce - this indic tes need for service.
19. Replacement Parts
When repl cement p rts re required, be sure the service technici n h s used repl cement p rts specified
by the m nuf cturer or h ve the s me ch r cteristics s the origin l p rt. Un uthorized substitutions m y
result in fire, electric shock or other h z rds.
20. Safety Check
Upon completion of ny service or rep ir to the TV, sk the service technici n to perform s fety checks to
determine th t the TV is in s fe oper ting condition.
21. Heat
The product should be situ ted w y from he t sources such s r di tors, he t registers, stoves, or
other products (including mplifiers) th t produce he t.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC — NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING

Warning
5
This section must be read carefully and followed by the user prior to the operation of the product.
The m nu l st tes import nt instructions for the user's own s fety, nd the proper oper tion of the product.
In case of an accident, please unplug the unit from the outlet immediately.
Hold the plug when unplugging the unit
from the outlet. The cord may cause fire
or electric shock if damaged.
Do not cause the product to lean or put it in
an unstable place since it may cause a
serious injury to a person, as well as damage
to the product if it falls.
Do not put any object that contains water -
such as flowerpot - the unit.
The water may penetrate into the unit, and
be a cause of fire or hazardous electric
shock.
To reduce the risk of electric shock, do
not remo e co er or back. No user -
ser iceable parts inside. Refer to qualified
ser ice personnel for repair.
Do not put on or use the product near water
and moisture-such as in a bathroom,
washbowl, etc. It may be a cause of fire and
electric shock hazards.
To pre ent fire and damages to the product,
unplug the unit from the outlet during
lightning storm, or when it is left unattended
and unused for a long period of time.
Do not let children hang on or climb on
the product since it may be a cause of
serious injury.
Slots and openings in the case are pro ided
for entilation to ensure reliable operation of
the product. Ne er put in any item-such as a
coin, paper, match- through these openings
since it may touch dangerous oltage points
that could result in fire or shock hazard.
Do not put olatile substance-such as
benzene, naphtha- near the product since it
may cause a change in the product's colour.
Do not iew the TV too closely since it
may cause damage in your eyesight.
Do not spill water or drop the remote
controller since it may be a cause of
malfunctioning.
Refer ser icing to qualified ser ice
personnel for cleaning at least once a year
since dust inside the TV set may be a result
or fire and malfunctioning of the product.

Warning
6
This section must be read carefully and followed by the user prior to the operation of the product.
The m nu l st tes import nt instructions for the user's own s fety, nd the proper oper tion of the product.
Ple se keep the user's m nu l in s fe pl ce for future reference.
The product should be situated away from
any heat source-such as radiators, heat
registers, sto es, or other products that
produce heat.
Do not put on any hea y item on the
power cord since it may result in fire or
hazardous electric shock if the cord is
damaged.
Do not co er the top of the tele ision set.
Ventilation will be pre ented, and it may
be a cause of fire if the product is
internally o erheated.
Unplug the power from the outlet and all the
related connections from the unit to pre ent
electric shock. At least two people must work
together to mo e the TV set when transporting
to pre ent the TV from falling, and
consequently, any serious injury or damage.
Do not touch the power cord with
moisturized or wet hands when plugging
to or unplugging from the outlet since it
may be a cause of electric shock.
Please be ad ised of electric wires and cables
when installing the antenna. It may be a cause of
hazardous electric shock and fire if the antenna
touches or falls on the electric wire; thus, it must be
installed firmly, and far away from the cables.
Do not expose the product to a dusty or
moisturized place since it may be a cause
of malfunctioning.
The screen case of the product
(32C1/42C1) is scratched easily.
When cleaning, use the microfiber sheet
which enclosed.
When a force to gi e it cleans strongly, it
will be scratched and the product's colour
will be changed. If foreign material gets in
the fiber, the product will be scratched.
Shake off the fiber cleanly and use.

Table of
Contents
7
Installation and Maintenance
Antenn Connection 9
Video Connection 12
C mcorder & Video G me Connection 13
DVD Pl yer Connection 14
STB Connection 15
PC Connection 16
C ble TV Bro dc sting Connection 18
Connect with the Dolby Digit l AMP 19
N me of E ch P rt 20
Basic Guide
P rts of the Remote Controller 22
Method To Use B sic Menu 24
To W tch TV 25
Setting Up TV St tions 27
Selection of AV nd Multimedi Input Sign l 31
Application Guide
Screen Adjustment 33
Sound Adjustment 38
Selection of L ngu ge 41
Adjustment of Time 42
Other Functions 44
Teletext 45
Troubleshooting 46
St nd rd of Product 48

Supplied
Accessories
8
Make sure that the following accessories are provided with the product.
AC cord Instruction m nu l
MUTE
PICTURE
P.MODE
STILL
3DPANORAMAP.PR
P.PR
LOCK SLEEP
P.STILLP. SWAP P.INPUT
ASPECT
SOUND
POWER
RECALL
PREVPR OK
MULTIMEDIA
MENU
V
O
L
V
O
L
PR
PR
123
456
789
0
X
?
DYNAMICBASS
Remote controller B tteries
Cover Bottom
-When you inst ll w ll mounting you set
up cover bottom like upper picture.
C ble holder
Microfiber sheet
(32/42C1 ONLY)
1
23
The method of wire arrangement
1. Assemble the c ble holder enclosed on the b ck
of TV. (PICTURE 1)
(ASSEMBLY METHOD: After you push the
"A"(prominence p rt of c ble holder) in the
hole, rot te the c ble holder clockwise s n
ngle of 90°. You c n sep r te in reverse order
of ssembly.)
2. Open the c ble holder. (PICTURE 2)
( you c n open the c ble holder th t press nd
push "B" p rt.)
3. After rr nge lines with the c ble holder, lock the
"B" g in. (PICTURE 3)

Antenna
Connection
9
Indoor Antenna Connection
1. Connect the feeder c ble of the ntenn to the combining d pter.
WH N TH IMAG IS NOT CL AR : Uncle r screen im ge nd b d reception m y be c use of wrong
ntenn connection. Be sure to check its direction nd pl ce when
inst lling.
2. Connect the combining d pter to the ntenn input t the left side of the TV set.
WH N USING TH COMBINING ADAPT R : You m y obt in the combining d pter t your closest
Service Center.
HDMI INPUT AV1 AV2
PC INPUT AUDIO
S-VHS
AV3 L -AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Antenn Input
BACK OF THE TV SET

Antenna
Connection
10
Antenn socket t the left side of the TV set
ANT/CABLE
ANT/CABLE
CTV Antenna Connection
Such community TV Antenn inst ll tion m y be found in most of co-op p rtments.
When a coaxial cable is used : Plug the co xi l c ble to the ntenn socket, nd fix it firmly by turning it to
the right.
When a feeder cable is used : Plug the co xi l c ble to the ntenn socket, nd fix it firmly by turning it to
the right.
Antenn socket t the left side of the TV set