Daewoo DTU-14 D3VG User manual

S/M No. : CP371P-010
14/20/21 D4
14/16/20/21 D3
Service Manual
Colour Television
CHASSIS : CP-371
JAN. 2000
DAEWOO ELECTRONICS CO., LTD
http : //svc.dwe.co.kr
Model :
DTU-14/16/20/21 D3VG
DTU-14/20/21 D4VG
DTU-14/20/21 D3TM
DTU-14/20/21 D4TM
Specifications
This service manual is a additional edition for CP-371 service guide.
Mains Voltage
PAL/SECAM-B/G, D/K, I, H, NTSC-3.58/4.43, NTSC-5.5
14" : 73W 20" : 78W
16" : 75W 21" : 86W
- . 2 Speaker (at any MOD. 10% THD )
: 5W + 5W (TWITTER 2.5W + 2.5W)
100 channels
VHF - L : CH2 - CH4
VG : R-28B04, TM : R-28B03
100 ~ 250V AC, 50/60Hz
VG
Sound output
Speaker
Memory channel
Reception
Remote control
Function
with Game
without Text
with Text
without Game
TV Standard
Power Voltage
- . 2 Speaker : 7.5W 4 ohm
TM
-. CHILD Lock (CH Lock)
VHF - H : CH5 - CH12
Cable Band : CHS1' - CHS3', CHS1 - CHS20
Hyper Band : CHS21 - CHS40
UHF : CH21 - CH69
-. 16 : 9 MODE
-. ZOOM MODE
-. Blue Back (ON/OFF)
-. Local Key Menu Control
-. Arrow puzzle Game
-. Monitor out
-. Simple SCART
-. Twitter Speaker
-. CHILD Lock (Security code Lock)
-. OSD MESH
-. 16 : 9 MODE
-. Blue Back (ON/OFF)
-. Local Key Control Menu Control
-. Monitor out
-. Simple SCART
-. Twitter Speaker
-. TELETEXT : 8 PAGE TELETEXT
TOP/FLOF MODE
-. ZOOM MODE
channel Unit
✔ Caution:In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)

1
TABLE OF CONTENTS
1. Specification ................................................................................................................................ 2
2. Safety Instruction ........................................................................................................................ 3
3. Circuit block Diagram ................................................................................................................. 4
4. IC Description .............................................................................................................................. 5
5. Trouble Shooting Charts ............................................................................................................ 15
6. Service Parts List ........................................................................................................................ 22
7. Mechanical Exploded View ......................................................................................................... 37

2
1. Specifications
VG : WITHOUT TXT. MODEL, TM : WITH TXT. MODEL
TV Standard PAL/SECAM-BG, D/K, I, H, NTSC-3.58/4.43, NTSC-5.5
Mains Voltage 100 ~ 250V AC, 50/60Hz
Power Consumption 14" : 73W 20" : 78W
16" : 75W 21" : 86W
Sound output -. 2 Speaker ( at any MOD. 10% THD ) 5W + 5W ( TWITTER 2.5W + 2.5W )
Speaker -. 2 Speaker : 7.5W 4 ohm ( 2EA )
Antenna Impedance 75 ohm unbalanced
300 ohm balanced with supplied balun
Tuning system Voltage Synthesize Tuning System
Memory channel 100 channels
Reception
channel Unit VHF - L : CH2 - CH4 VHF - H : CH5 - CH12
Cable Band : CHS1’ - CHS1 - CHS20
Hyper Band : CHS21 - CHS40
UHF : CH21 - CH69
Remote control VG : R-28B04, TM : R-28B03
Screen size 14" : 34 Cm ( A34JLL 90 x 02 )
16" : 38 Cm ( A38JLL 90 x 02 )
20" : 48 Cm ( A48JLL 90 x 02 )
21" : 51 Cm ( A51JLL 90 x 02 )
Weight 14" : 9.7 Kg ( set )
16" : 12 Kg ( set )
20" : 17.2 Kg ( set )
21" : 21.5 Kg ( set )
Aux. Terminal Front : Earphone, Video In, Audio In
Rear : Video In, Audio In, Monitor out ( 2 RCA JACK, 1 SCART JACK )
Function VG TM
-. CHILD LOCK ( CH LOCK )
-. 16 : 9 MODE
-. ZOOM MODE
-. Blue Back ( ON/OFF )
-. Local Key Menu Control
-. Arrow puzzle game
-. Monitor out
-. Simple SCART
-. Twitter speaker
-. CHILD LOCK ( SECURITY CODE
LOCK )
-. OSD MESH
-. 16 : 9 MODE
-. ZOOM MODE
-. Blue Back ( ON/OFF )
-. Local Key Control Menu Control
-. Monitor out
-. Simple SCART
-. Twitter speaker
-. TELETEXT : 8 PAGE TELETEXT
TOP/FLOF MODE

3
2. Safety Instruction
WARNING : Before servicing this chassis, read the “ X-RAY RADIATION precaution “, “ safety precaution “ and “
product safety notice “below.
1. Excessive high voltage can prodece potentially haz-
ardous X-RAY RADIATION. To avoid such hazards,
the high voltage must not exceed the specified limit.
Thenominalvalueofthehigh voltageofthisreceiver is
23-24kv(14”), 26-27kv(20”, 21”) at max beam current.
The high voltage must not, under any circumstances,
exceed 27.5kv (14”, 20”), 29.0kv(21”).
Each time a receiver require servicing, the high
voltage should be checked. It is recommended the
reading of high voltage recorded as a part of the ser-
vice records. it is important to use an accurate and reli-
able high voltage meter.
2.Theonly source of X-RAYRadiationinthisTVreceiver
is the picture tube. For continuous RADIATION protec-
tion, the replacement tube as specified in the part list.
X-RAY RADIATION PRECAUTION
1. Potentials of high voltage are present when this
receiverisoperating. Operation of the receiveroutside
the cabinet or with the back cover removed involves a
shock hazard from the receiver.
1)Servicing should notbe attempted by anyone who is
not thoroughly familiar with the precautions neces-
sary when working on high-voltage equipment.
2) Always discharge thepicturetubetoavoidthe shock
hazard before removing the anode cap.
3) Dischange the high potential of the picture tube
before handling the tube. The picture tube is highly
evacuated and if broken, glass fragments will be
violently expelled.
2. If any Fuse in this TV receiver is blown, replace it with
the FUSE specified in the Replacement Parts List.
3. When replacing a high wattage resistor ( oxide meta
film resistor ) in circuit board, keep the resistor 10mm
away from circuit board.
4. Keep wires away from high voltage or high tempera-
ture components.
5. This receiver must operate under AC260 volts, 50Hz /
60Hz. ( AC 100 ~ 250 volts, 50 / 60 Hz ) NEVER con-
nect to DC supply or any other power or frequency.
SAFETY PRECAUTION
Many electrical and mechanical parts in this chassis
have special safety-related characteristics.
These characteristics are often passed unnoticed by
a visual inspection and the X-RAY RADIATION pro-
tection afforded by them cannot necessarily be
obtained by using replacement components reted for
higher voltage, wattage, etc.
PRODUCT SAFETY NOTICE

4
3. Circuit Block Diagram

5
4. IC description
4-1. DW 5457 - *** ( SDA 5457 : SIEMENS TYPE )
(1) General Description
The SDA 545x is a single chip teletext decoder for decoding Worled System Telertext data as well as Video Program-
ming System ( VPS ), Program Delivery Control ( PDC ), and Wide Screen Signalling ( WSS ) data used for PALplus
transmissions ( line 23 ). Furthermore, the device provides an integrated C500 based general-purpose, fully 8051-
compatiblemicrocontroller with televisionspecific hardware features.The on-chip display unit for displaying ‘ Level 1.5
’teletext data can be used for customer defined on-screen displays. Up to 10 display pages are available internally.
ROMless versions can be used together with external RAM.
The SDA 545x contains a slicer for VPS, WSS, PDC, and TTX, an accelerating acquisition hardware modul, a display
generator for “Level 1.5 “ TTX data, and an 8 bit microcontroller running at 250 ns cycle time ( min. ). The controller
with dedicated hardware guarantees flexibility, does most of the internal processing of TTX acquisition, transfers data
to/fromtheexternal memory interface and receives/transmits dataviaIC-firmware user-interface. The slicer combined
with dedicated hardware stores TTX data in a VBI buffer of 746 Byte. The microcontroller firmware performs all the
acquisition tasks ( hamming - and parity - checks, page search and evaluation of header control bits ) once per field.
Additionally, the firmware can provide high-end Teletext-features like Packed-26-handling, FLOF, TOP ( in 8/10-page-
versions ) and listpages. The interface to the user software is optimized for minimal overhead ( see firmware data
sheet for details ).
The SDA 545xOTP contains 64KB-Program-ROM plus 6KB-Character-ROM, which both are ‘one-time-programmable
‘( OTP ). It is pin-compatible to all the other ROM-types of SDA 545x. It can as such be used as a test circuit, a ramp-
up solution or even for small series in mass production.
(2) Features
Acquisition ( only SDA 545x )
Feature selection via special function register
Simultaneous reception of TTX, VPS, PDC, and WSS ( line 23 )
Fixed framing code for VPS and TTX
Acquisition during VBI
Direct access to VBI RAM buffer
Acquisition of packets x/0 to x/24, x/26, x/27, 8/30 ( firmware )
Assistance of all relevant checks ( firmware )
1-bit framing code error tolerance ( switchable )
Complete TTX-acquisition firmware with simple user interface
Display
Feature selectable via special function register
50/60/100/120-Hz display
Level 1.5 serial attribute display pages
Blanking and contrast reduction output
10 direct addressable display pages for SDA 5450
8 direct addressable display pages for SDA 5454 to SDA 5457
1 direct addressable display pages for SDA 5451 to SDA 5452
12 X 10-character matrix
96 character ROM (standard G0 character set )

6
156 national option chara ters for 12 languages ( European version )
288 characters for X/26 display
64 block mosaic graphic characters
32 characters for OSD in expanded character ROM + 32 characters inside OSD box
saturation of basic colors adjustable in 4 steps
8 foreground + 8 background colours out of 64 colours
Conceal/reveal
Transparent foreground/background - inside/outside of a box
Constast reduction inside/outside of a box
Cursor ( Colour changes from foreground to background colour )
Flash ( flash rate 1 s, independent of frame rate )
Programmable horizontal and vertical sync delay
Full screen background colour in outer screen
Double size/double width/double height characters
Character shadowing
Box shadowing
Up to 64 Characters in a display row
Software selectable pixel frequency ( 12, 13.7, 16, 19.2 and 24MHz )
Synchronization
Display synchronization to Sandcastle Pulse or Horizontal Sync ( HS ) and Vertical Sync ( VS )
Microcontroller
8bit C500-CPU ( 8051 compatible )
24-MHz internal clock ( max. )
0.25 us(min.) instruction cycle
Non-multiplexed 8-bit data and 16 ... 19-bit address bus ( ROMless Version )
Eight 16-bit data pionter registers ( DPTR )
Two 16-bit timers
Watchdog timer
Capture compare timer for infrared remote control decoding
256-bytes on-chip RAM
Display RAM and TXT/VPS/PDC/WSS-Acquisition-Buffer directly accessible via MOVX
10Kbyte on-chip diaplay-RAM ( access via MOVX ) for SDA 5450
8Kbyte on-chip display-RAM ( access via MOVX ) SDA 5454 to SDA 5457
1Kbyte on-chip display-RAM ( access via MOVX ) for SDA 5451 to SDA 5452
1Kbyte on-chip ACQ-buffer-RAM ( access via MOVX )
1Kbyte on-chip extended-RAM ( XRAM, access via MOVX ) for SDA 5450 and SDA 5454 to SDA 5457
6 Channel 8-bit pulse width modulation unit
2 Channel 15-bit pulse width modulation unit
ADC with 8-bit resolution ( 4 multiplexed input channels )
Ports
One 8-bit I/O-port with open drain output and optional I C Bus emulation ( Port0 )
Two 8-bit multifunctional I/O-ports ( Port1, Port3 )
IC description
2

7
One 4-bit port working as digital or analog inputs for the ADC ( Port2 )
One 1-bit Input-port with secondary functions ( P4.7 / VS / EVEN_ODD )
One 1-bit I/O-port ( P4.0 ) ( ROM Version )
One 2-bit I/O-port with optional RAM/ROM address expansion up to 512Kbyte ( P4.0 and P4.1 ) ( ROMless Version )
One 2-bit I/O-ports ( P4.2, P4.3 )
Additional Features
Single external 6MHz crystal, all necessary clocks are generated internally
CPU clock speed selectable via special function registers ( 7 possible selections between 3 and 24 MHz )
IC description

8
(3) Block Diagram
Figure 5 Block
Diagram
1) only ROM-versions
2) only ROMless-versions
3) only SDA5450 and SDA5454 to SDA5457
4) 10kByte for SDA5450, 8kByte for SDA5454 to SDA5457, 1kByte for SDA5451 and SDA5452
IC description

9
(4) Pin Configuration S-DIP-52 ( ROM Version )
( Top view )
Figure 1 S-DIP-52 ( ROM Version of SDA 545x )
IC description

10
4-2. DW 90244 - *** ( z90244 : ZILOG TYPE )
(1) GENERAL DESCRIPTION
The Z9024X Digital Television Contrlooer ( DTC ) family is ZiLOG’s most powerful Z8-based DTC product offering.
Enhanced features of the Z9024X include :
* Large System RAM and ROM
* Flexible Inter-Row Spacing
* High-Resolution Character Cell
* Background Mesh Effect
* Dedicated Infrared Capture Registers
* On-Chip Analog-to-Digital Converter
* Hardware Master Mode I C Interface
The familiar Z8 architecture, in combination with these advanced features, makes the Z9024X family an idea choice
for mid-range televisions in both PAL and NTSC markets.
The Z9024X family consists of three basic devices :
* Z90243, 16kb
* Z90244, 24kb
* Z90241
The OTP supports a field-programmable 32kb system ROM. The ICE Chip is used in the Protopak. The Z9024X fam-
ily takes full advantage of the Z8 microcontroller’s expanded register file space to offer greater flexibility in On-Screen
Display creations such as bitmap-simulated graphics, icons, and animation generation.
ON SCREEN DISPLAY ( OSD ) FEATURES
* Supports Displays Up to 10 Rows by 24 Columns with 256 Characters
* Character Cell Resolution of 14 Pixels by 18 Scan Lines
* Variable Inter-Row Spacing from 0-15 Horizontal Scan Lines
* Foreground and Background Color of a Character is Fully Programmable Using a Color Palette Table
(2) FEATURES
* Z8 MCU Core at 6 MHz
* Avaible in 16kb and 24kb Mask ROM Options
* 236 Bytes of System RAM
* Ten 6-bit Pulse Width Modulators
* One 14-bit Pulse Width Modulators
* Three-Channel 4-Bit Analog-to-Digital Converter
* 26 General Purpose I/O Pins
* I C Master Serial Communication Port
* 42-Pin SDIP Package ( Z90243, Z90244 and, Z90241 )
IC description
2
R
2

11
(3) BLOCK DIAGRAM
IC description

12
(4) PIN-OUTS AND PIN DIRECTION
Z9024X PRODUCT PIN DIAGRAM
IC description

13
(5) PIN DESCRIPTION
Z9024X 42-PIN SDIP PIN DESCRIPTIONS
The following development tools are available for the programming and debugging of this device :
* Z90259000ZEM Emulator/Programmer
* Z90209000TSC Protopak
* Z90234000ZAC Z90243 Accessory Kit
Pin Number Pin Function Direction Reset State Name Note
11, 27 +5 Volts PWR PWR Vcc
10, 25 0 Volts PWR PWR GND, AGND
26 Infra Red remote capture input I I IRIN
16 14-bit Pulse Width Modulator Output OIPWM11 1
42, 41, 33, 32, 14, 17,
18, 19, 20, 21 6-Bit Pulse Width Modulator Output OIPWW10-PWM1 1
16, 14, 17, 18, 19, 20,
21 Bit-Programmable Input/Output Ports I/O IP56-P50
9, 8, 7, 6, 5, 4, 3, 2 Bit-Programmable Input/Output Ports I/O IP27-P20
2Half Tone Output OIHLFTN
7, 9 I C Data I/O ISDATA0, 1
6, 8 I C Clock I/O ISCLK0, 1
34, 24, 23, 33 Bit-Programmable Input/Output Ports I/O IP63-P60
42, 41, 33, 32, 30, 1 Bit-Programmable Input/Output Ports I/O IP47-P42, P40
12 Crystal Oscillator Input I I XTAL1
13 Crystal Oscillator Output O O XTAL2
28 Dot Clock Oscillator Input I I OSDX1
29 Dot Clock Oscillator Output O O OSDX2
35 Horizontal Sync I I HSYNC
36 Vertical Sync I I VSYNC
40 Video Blank O O VBLANK
37, 38, 39 Video R, G, B O O R, G, B
22, 23, 24 4-bit Analog-to-Digital Converter Input AI IADC3-2, ADC0
15 Device Reset I/O IRESET
Note :
1. It is Input on POR. It must be configured to be output ports for PWM applications
IC description
2
2

14
4-3. TDA6107Q ( Triple video output amplifier )
(1) General description
The TDA6107Q includes three video output amplifiers in one plasticDIL-bent-SIL 9-pin medium power ( DB9MPF )
package(SOT111-1),using high-voltage DMOS technology, and is intended to drive the three cathodes of a colour
CRT directly. To obtain maximum performance the amplifire should be used with black current control.
(2) Feature
Typical bandwidth of 5.0Mhz for an output signal of 60V ( peak-to-peak value )
High slew rate of 900V/ß¡
No external components required
Very simple application
Single supply voltage of 200V
Internal reference voltage of 2.5V
Fixed gain of 52
(3) Block Diagram
(4) Pin Description
IC description

15
5. Trouble Shooting Charts
5-1. NO RASTER

16
5-2. NO PICTURE ( RASTER OK )
Trouble Shooting Charts

17
5-3. NO VERTICAL SCANNING ( ONE HORIZONTAL LINE ON SCREEN )
Trouble Shooting Charts

18
5-4. NO COLOR
Trouble Shooting Charts

19
5-5. NO SOUND ( PICTURE OK )
Trouble Shooting Charts