Daffodil AMC530 User manual
Daffodil
User Manual
AMC530
Digital Alarm Clock
Réveil Numérique
Digitaler Wecker
Orologio sveglia digitale
Reloj despertador digital
Digital Daffodil Ltd
www.digitaldaffodil.com
-2-
English
4.2 Functions
Installing the batteries
Setting the time and date
Setting the alarm clock
Open the battery compartment, on the bottom of the device, and insert the 2 supplied
AAA batteries. The AMC530 will beep and the LCD display will activate upon correct
insertion. Replace the battery cover.
When the time is displayed on the LCD screen, press SET to start adjusting the time
and date. The UP and DOWN buttons change the flashing value and the SET button
cycles through the adjustable values in this order: hour – minutes – year –month – day .
Press the mode button to finalise your settings and return to clock mode. The device
will automatically return to clock mode after a minute's inactivity.
First select alarm mode. The mode button switches between clock mode and alarm
mode, alarm mode is indicated by a bell on the left hand side of the LCD screen and
whilst in clock mode, the colon between the hour and minute display flashes. Press
the UP button to select from the following alarm modes:
MODE
SET
RESET
°C/°F/DOWN
Battery compartment
UP
LCD display
1. Introduction
Thank you for purchasing this product. This user manual will help you to familiarise
yourself with all the features of your new device, so please do take the time to read it
thoroughly.
The AMC530 is a stylish battery-powered alarm clock, thermometer and calendar with
a transparent LCD display.
Calendar with date and day display
Thermometer in Celsius (°C) or Fahrenheit (°F)
Adjustable snooze function: 1-60 minutes
8 selectable alarm tones
Stylish design with transparent LCD display
Powered by 2xAAA batteries
Digital alarm clock
2 x AAA batteries
User manual
4. Parts & Functions
2. Main Features
3. Package content
Digital clock with 12 or 24 hour display
User manual
-1-
-3-
1 “(((o)))”, Single alarm
2 “ZZ” Alarm with snooze
3 “blank” No alarm
Press SET to start adjusting the alarm time. The UP and DOWN buttons change the
flashing value and the SET button cycles through the adjustable values in this order:
hour, minutes, snooze duration (settable from one minute to one hour in 1 minute
intervals). Press the mode button to finalise your settings and return to alarm mode.
The device will automatically return to alarm mode after a minute's inactivity.
Time Formats 12 and 24 hour
Alarm Modes Single / Snooze Repeat
Alarm Tones 8 settable tones
Temperature Formats °C / °F
Battery Type 2 x AAA
5. Specifications
Please note the above instructions are only intended for reference purposes.
Digital Daffodil Ltd reserves the right to revise product specifications, features and
design without notice.
For any further enquiries, please telephone Digital Daffodil Ltd's helpline on
