DANDELION DBDMBIN User manual

SKU: DBDMBINSKU: DBDMBIN
Eco Dump BinEco Dump Bin
USER GUIDEUSER GUIDE
RESPONSIBLY CREATING BETTER PRODUCTS FOR A BETTER WORLD

w
Table of Contents
USER GUIDEUSER GUIDE
2
Parts DiagramParts Diagram
AssemblyAssembly
InstructionsInstructions
Contact UsContact Us

PARTS DIAGRAMPARTS DIAGRAM
3
A1. x4 A2. x4
B1. x2 B2. x2
C. x1
NOTE: 2 people are recommeded.
A rubber mallet (not included) is required.
Leg
Bottom
Side Panel

ASSEMBLYASSEMBLY
INSTRUCTIONSINSTRUCTIONS
4
1. Assemble legs: Insert (1) Leg Board (A2) into (1) Leg Board (A1), gently tap the top
with a rubber mallet (not included) until both boards are fully fitted.
Assemble remaining legs the same way.
2. Choose your dump bin depth. The Bottom Board (C) can be assembled at the
middle or the bottom. Insert tabs on Bottom Board (C) into the prefered slots on
both Side Panels (B1).
Middle
Bottom
NOTE: Before assembling, make sure the side with half cut facing outside.

ASSEMBLYASSEMBLY
INSTRUCTIONSINSTRUCTIONS
5
3. Attach (1) Side Panel (B2) to the main body on each side by fitting the tabs on B1
into the corresponding cutouts on B2. Gently tap B2 down until the top is flush.
NOTE: Before assembling, make sure the side with half cut facing outside.

ASSEMBLYASSEMBLY
INSTRUCTIONSINSTRUCTIONS
6
4. Carefully turn the dump bin body upside down. Insert (1) assembled leg to the
bottom corner, gently tap the leg to secure it with the dump bin. Assemble the
remaining legs the same way. Turn the dump bin to its standing position.
The assembly is finished.

7
CONTACT USCONTACT US
THANK YOU FOR SPREADINGTHANK YOU FOR SPREADING
THE SEEDS OF SUSTAINABILITYTHE SEEDS OF SUSTAINABILITY
AND HELPING TO PROTECTAND HELPING TO PROTECT
OUR PLANETOUR PLANET
H   G   H   G   
 D  : D  :
888-257-6639888-257-6639
DANDELION