DANDELION DBPED30 User manual

DBPED30 DBPED36 DBPED42DBPED30 DBPED36 DBPED42
ECO FRIENDLY PEDESTALECO FRIENDLY PEDESTAL
USER GUIDEUSER GUIDE
RESPONSIBLY CREATING BETTER PRODUCTS FOR A BETTER WORLD

w
Table of Contents
USER GUIDEUSER GUIDE
2
Parts DiagramParts Diagram
AssemblyAssembly
InstructionsInstructions
Contact UsContact Us

PARTS DIAGRAMPARTS DIAGRAM
3
DBPED30
A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1
DBPED36
A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1
DBPED42
A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1 D. Shelf X1
NOTE: 2 people are recommeded.
A rubber mallet (not included) is required.

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
4
1. Assemble pedestal body by inserting tabs on Side Panel (A1) into the slots on Side Panel
(A2). Tap the top of (A2) with a rubber mallet (not included) to secure the side panels.
NOTE: Before assembling, make sure the side with half cut facing outside.
DBPED30
DBPED36
DBPED42

5
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
2. Assemble the Top Panel (B) with the pedestal body by fitting the top of the pedestal into
the cross cutouts at 4 corners.
Peel off the protective film on Acrylic Top (C) and attach to the top of pedestal the same way.
DBPED30 DBPED36 DBPED42

6
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
3. (For 42” Pedestal ONLY)
Insert the Shelf (D) into the opening on the pedestal body with an angle, and secure it at the
middle of the pedestal. The assembly is finished.

7
CONTACT USCONTACT US
THANK YOU FOR SPREADINGTHANK YOU FOR SPREADING
THE SEEDS OF SUSTAINABILITYTHE SEEDS OF SUSTAINABILITY
AND HELPING TO PROTECTAND HELPING TO PROTECT
OUR PLANETOUR PLANET
H   G   H   G   
 D  : D  :
888-257-6639888-257-6639
DANDELION