Dante DLF1330V User manual

DLF1330V
1/3” D/N 700TVL
Vandal Dome
Installation and Operations Manual
Model Number: DLF1330A NTSC
DLF1330B AL
Description: 1/3” 700TVL Resolution
Day/Night Vandal Dome with WDR

DLF1330
Built-in
ATW1/ATW2/MANUAL/F I X E D
AGC High/Mid/Low/Off
more than 50dB
Auto/Anti-flicker/ F i x e d / Manual
Digital WDR Off/On ( 0-63 level a d justable)
BLC HLC/BLC/Off
2DNR Off/On
Auto/B/W/Color/EXT
Motion detection Off/On(4 areas)
Image adjustment
Off/On(8 areas)
Privacy zones
Mirror function Off/On(Horizontal mi r r o r )
Contrast,Sharpness , S a t u r ation
1.0Vp-p Composite Vide o O u t p u t ,75Ω
Colo r :0.02L u x/F1.2 ,B/W:0 . 002Lux /F1.2
DC ICR 2.8~11mm
TVLines
DC12V/ A C24V
DC1 2V/3 00m A,AC 24V/ 4.8 W
700

EXPOSURE SHUTTER
AGC
BRIGHTNESS
DWDR
WHITE BAL ATW1
AWC SET
ATW2
MANUAL
BACKLIGHT BLC
OFF
HLC
DAY&NIGHT COLOR
EXT
B/W
AUTO
DPC
SPECIAL
CAM TITLE
PRIVACY
MOTION
PARK LINE
IMAGE ADJ
VERSION
LANGUAGE
RESET
EXIT

ENTER: ENTER the main menu.
MANUAL
Attention:
Available submenu ifthere is a .You canenter Into the submenu by
pressing the ENTENbutton.
1.Press ENTER button,the menu willappear on thescreen.Use DOWN
button to movethe cursor to the name of"lens types"
2.Use LEFT or RIGHT button to setthe "lens types"(DC/VIDEO/MANUAL).
COLOR
EXPOSURE
WHITE BAL.
BACKLIGHT
DAU&NIGHT
SPECIAL
RESET
EXIT

EXPOSURE
EXPOSURE
AUTO
BRIGHTNESS 050
DWDR
RETURN RET
MIDDLE
SHUTTER:Choose the electronicshutter(1/50,FLK,1/250,1/500,
1/1000,1/2000,1/4000,1/5000,1/10000,1/100000,AUTO)
BRIGHTNESS:Adjust camera s brightness(value:0-255)
AGC:Adjust AGC level,thereare four kindsof level optionally
(OFF/LOW/MIDDLE/HIGH).
DWDR(Digital Wide Dynamic Range):OFF/ON(value:0-63)
The camera deliversclears,high quality pictures even ina backlight,
by increasing exposurein dark areas while decreasing it in bright areas;
a corrected imagewith clear results.
WHITE BAL
ATW:Auto tracking Balance
Camera continously monitorsthe color temperature,and automatically
set proper whitebalance to display true color.
There are twomodes optionally(ATW1 and ATW2)
AWC SET: The white balanceis automatically adjusted in a specific
Environment.In orderto obtain the best result,pressthe ENTER button
while the camerafocuses on white the balance again.
MANUAL:
To fine adjust,select the manual mode,while monitoring the difference
on the screen,setto "MANUAL" mode,increase or decrease the value
for red andblue,watching the color of thepicture,and you obtain the
best color.
SHUTTER
OFF

COLOR TEMP MANUAL
80
BLUE
RED
RETURN
110
WB MANUAL
RET
COLOR TEMP:MANUAL/INDOOR/OUTDOOR.
BLUE:Adjust blue value,only when selectingMANUAL.
RED:Adjust red value,only when selectingMANUAL.
BACKLIGHT
OFF:Turn off BLC.
BLC:Turn on BLC.
BLC
AREA SEL. AREA1
AREA STATE ON
GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
RETURN RET
005
006
003
004
042
AREA SEL:Select BLC area,AREA1and AREA2 optionally.
AREA STATE:BLC area display on or off.
GAIN:Set BLC gain value.
HEIGHT: Adjust the heightof BLC area.
WIDTH:Adjust the widthof BLC area .
LEFT/RIGHT:Adjust horizontal positionof BLC area .
TOP/BOTTOM:Adjust vertical position of BLC area.

HLC: Highlight compensation willdarken image portionsfor clearer images.
HLC
LEVEL 200
MODE ALL DAY
RETURN RET
LEVEL:Adjust HLC level.
MODE:ALL DAYand NIGHT ONLY optionally.
COLOR: Camera always displayscolor image.
EXT:Change to theCOLOR/ BW by installing IRLED BOARD or Switch.
AUTO:Camera recognize DAY/NIGHT mode automatically, image is
color in daytime, and changes to B/Wmode at night.
D&N AUTO
D N Level
D N Delay
N D Level
N D Delay
Return
033
3 SEC
156
RET
1 SEC
DNLEVEL:The sensitivity ofday to night value.
NDLEVEL: The sensitivityof night today value.
NDDELAY:The switching timeof night today.
B/W: Camera always displaysblack and white image.
DNDELAY:The switchingtime of dayto night .
DAY NIGHT

DPC :Defective Pixel Correct
This will attemptto detect and correct defective pixels.Lens must
be covered.
COVER THE LENS
THEN
PRESS ENTER KEY
SPECIAL
CAM TITLE
SPECIAL
OFF
MOTION OFF
PRIVACY OFF
PARK . LINE
IMAGE ADJ.
COMM ADJ
LANGUAGE
VERSION
RETURN RET
10 12 22
ENGLISH
OFF
Used to turnon or off the camera title.The camera title is 15 character
at most,"0-9,A-Z,punctuation", The position of camera title can be
adjusted in "POS"of the MENU. "CLR" clears the entire entry.To modify
one character,useor-to position the cursor above the character.To
be modified andclick the ENTER button after Selecting the character
to enter.
CAM TITLE:

0 1 2 3 4 5 6
7 8 9 A B C D E
F G H I J K L M
N O P Q R S T U
V W X Y Z
/ = & ~ , .
CLR POS END
------------------------------
MOTION
This product hasa feature thatallows you toobserve movements of objectsin
different area onthe screen,and the on the screenwhen
movement is detected;thecamera detects anobject s movement bysensing
disparity of outline,andlevel of brightnessand color.
AREA SEL
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
DEGREE
VIEW
RETURN.
MOTION
AREA SELECT:Enable user toselect the motion area.
AREA STATE:Enabled user to set up ON/OFF in selected area.
HEIGHT:Adjust the heightof motion detection area.
WIDTH:Adjust the widthof motion detection area.
LEFT/RIHGT:Adjust horizontal positionof motion detectionarea.
TOP/BOTTOM:Adjust vertical positionof motion detection area.
DEGREE: Set degree ofthe motion detection.
AREA1
ON
004
004
002
002
038
ON
RET

MOTION VIEW:Display the motionarea on the screen.
PRIVACY:
OFF:Close the privacymasking function.
ON:Open the privacymasking function.
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
COLOR
RETURN
AREA 1
ON
032
032
020
016
000
RET
PRIVACY
AREA SELECT:Select the privacymasking area (8 optional areas) .
AREA STATE:Enabled user to set up ON/OFF in selected area.
HEIGHT:Adjust the heightof privacy masking area.
WIDTH:Adjust the widthof privacy masking area.
LEFT/RIHGT:Adjust horizontal position of privacy masking area.
TOP/BOTTOM:Adjust vertical positionof privacy masking area.
COLOR: Set color ofthe privacy masking area (16 color to choose) .
PARK LINE:
Back a carto aide function,itcan be used for the rear-view camera.

LT
LB
RT
RB
F
N
T
RET
075
027
113
170
013
069
009
PARK.LINE
LT:Adjust left top side of park line.
LB: Adjust left bottomside of park line
RT: Adjust right top side of parkline
RB: Adjust right bottomside of park line
F: Adjust far side of park line
N: Adjust near side of park line
T: Adjust the sizeof park line
IMAGE ADJ:
LENS SHAD.
2DNR
MIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG.IMAGE
RETURN
OFF
ON
OFF
134
026
CRT
OFF
RET
Back a carto aide function,itcan be used for the rear-view camera.
IMAGE ADJ.

LENS SHAD:Open or close side light compensationfunction.
2DNR:Reduce the gainnoise and produceclear,obvious imgesin low
illumination environment.
MIRROR: Flip the imagehorizontally,the function can beused for the
rear-view camera.
FONT COLOR:Adjust osd font color and cameratitle&ID font color.
CONTRAST:Adjust camera s contrast.
DISPLAY:There are three optional modes(CRT/ USER/ LCD)
GAMMA:Adjust Gamma value.
PED LEVEL:Adjust ped level.
COLOR GAIN: Adjust color gain.
NEG. IMAGE: Flims represented images in an invertedapproach,
the function invertimages so that they look normal
to human eyes.
GAMMA
PED LEVEL
COLOR GAIN
RETURN
0.45
0 30
1 44
RET
COMM ADJ:
GAMMA
BAUD RATE
PROTOCOL
DISPLA ID
ID POS
RETURN
001
2400
PELCO-D
OFF
RET
USET ADJ.
COOM ADJ.
CAMERA ID:Adjust the CAMERA ID from 0to 255.
BAUD RATE:Set RS-485 communication speed.There are sixoptions as
follow: 2400,4800,9600,19200,38400,57600.
PROTOCOL:Set communication protocol,PELCO-D/PELCO-P/
NEXTCHIP optionally.

DISPLAY ID: Display camera ID on or off..
ID POS:Set position ofcamera ID.
LANGUAGE: Camera OSD menulanguage choose,there are two
language as follow:Englishand Chinese.
VERSION:Display camera s version.
RESET
Reset the camerafunction settings todefault.
EXIT
Exit and savethe camera function settings.