Dante DLS1798LA3Q9 User manual

DLS1798LA3Q9
Thermal PTZ Camera
Installation and Operations Manual
Model Number: DLS1798LA3Q9
Description: hermal and 36x CCD P Z Camera

DLS1798LA3Q9S PTZ Thermal Camera
User Operation Manual
Thank you for using our company’s product. Please read this operation manual
carefully before using it, as it can provide you with correct technical information
on how to properly do the installation.
Please contact us if you come across problems that are not mentioned in this
instruction. We will supply you with additional technical support.

Warning: Remind user of potential danger!
1. Please read this instruction carefully before installing this device.
2. Please follow the warnings on the device and the instruction.
3. During the process of transporting and use, please avoid strong vibration in
order to protect the optic and electronic components.
4. Please use the power supply specified instruction on how to connect the
wires.
5. Do not open the device by yourself, or else it may cause electric shock or
machine damage. If there are problems, please contact factory and remember
not to try and repair it without instructions from Dante.
6. In order to protect the device and people, this device need to be installed on
firm, flat area.
7. Please install appropriate surge protection equipment to avoid damage from
power surge or lightning.
8. Use this device within the limitation of humidity and temperature.
9. To protect the imaging components from damage, please do not aim the
visible camera at sun and other objects of high bright intensity for a long time.
Attention
Don’t cover the sensitive components in front of lens in order to ensure the
device operates normally.
If the thermal camera is not operating as a result of power outage, please
restart unit.

Contents
Part One Introduction .................................................................................... 1
1. Introduction............................................................................................ 1
2. Features ................................................................................................ 1
3. Technical Indicators ............................................................................... 1
Part Two Installation Instruction ................................................................... 8
1. Installation Environment ........................................................................ 8
2. Shape and Dimension ........................................................................... 9
3. Installation Step ..................................................................................... 9
4. System Connection Reference............................................................ 11
Part Three Operation Introduction ............................................................... 12
1. Function Introduction........................................................................... 12
2. Cam Protocol and Address Setting...................................................... 13
3. Baud Rate Setting ............................................................................... 15
4. Protocol Setting ................................................................................... 15
Part Four Quality guarantee and after-sales service ................................... 16
1. Quality Guarantee and After-sales Service.......................................... 16
2. Contact Way .......................................... Error! Bookmark not defined.
Appendix : Common Problems Analysis..................................................... 17
Appendix : RS-485 LINE............................................................................. 18
Appendix : Cable Spec List all countries..................................................... 20

1
Part One Introduction
1. Introduction
This thermal imaging camera combines thermal imager, visible camera and
pan-tilt. Unit has two video output and 360°horizontal pan rotation for high end
monitoring
2. Features
DLS1798 adopts thermal imaging technology and has a clear image, not
restricted by light
low light color to black and white camera for continuous monitoring day and
night
integrated pan-tilt, for multiple movement directions, no blind spot
monitoring and high accurate orientation
high intelligent, easy to operate and maintain
smart shell with professional design, light, firm, thermo stabilization,
anti-corrosion, waterproof and acid rain proof
low power consumption, low heat producing, stable performance
3. Technical Indicators
3.1 Configuration and relevant indicators
Configuration
camera Integrated camera
Thermal imager Uncooled radiant heat focal plane arrays
Power supply 24VDC±10% Iin≥2.5A
interface RS-485, Double video output, 24VDC
power supply
Technical
indicators
capability Night vision distance＞800m, day vision
distance＞1500m
Power
consumption ≤30W
weight 14.5Kg

2
dimension 507*310*254mm
MTBF(Mean
Time Between
Failure)
≥10000 hours
Environment
indicators
Working
temperature -25℃～+ 60 ℃
Storage
temperature -40℃～+ 85 ℃
Anti-vibration 150m/s²11ms
Salt-fog proof continuously spray fog for 48 hours under
PH6.5-7.2
3.2 Key Components Indicators
Camera
Indicators
Scanning method Progressive Scan
zoom 36X optical zoom
Image inductor 1/4” IT Exview HAD CCD
Valid pixel 440,000
Focus automatic, one push, manual, unlimited
far
Focal length f＝3.4~122.4mm
Signal-to- noise ≥50db
Video output VBS:1.0Vp-p (simultaneous negative),Y/C
output
Lowest
illumination 0.01Lx
Electronic shutter 1/1~1/10000s
Simultaneous
system Simultaneous inside or outside
White balance Auto, ATW, Indoor, Outdoor, One-push,
Manual
Back light
compensation ON/OFF
Basic
function of
pan-tilt
Tilt speed 0～30°/s
Pan speed 0～22°/s
Preset points 220
Scan speed 1 °/s
Cruise function 6 cruise paths, each path can set up 20
presetting bits
Thermal
imager
Sensitive
components Uncooled infrared focal plane detector
Wave length 8-14µm
Focal length 100mm
Detection
distance People 2400m, vehicle 6600m
Thermal control Auto/Manual control

3
4. Menu Setup Instruction
1. Menu basic operation
a) Use keyboard or matrix to adjust No. 64 pre-sets or adjust the No.1 pre-sets twice
within four seconds, the main menu will be open.
b) After the menu is on the screen, if use keyboard, you can control joystick to move
cursor, turn up or down to move cursor to the item that need set, turn it left or right to
amend the contents or enter this item to set; If use matrix, operate“TILT UP”,“TILT
DOWN”to move cursor to the item that need set, operate “PAN LEFT,“PAN
RIGHT”to amend the contents or enter the item to set.
c) Thermal camera has the function of memory and data will not lose settings when
power off. Main set of the menu, please refer to the menu setup.
2. Menu Setup
2.1 MAIN MENU
2.1.1 DISPLAY SETUP: Enter the submenu of screen
display set. You can set ID display, pre-setting
point title display and camera self display.
2.1.2 CAMERA SETUP: Enter the submenu of
camera parameter set
2.1.3 CONTROL SETUP: Enter the submenu of
thermal camera control parameter set.
2.1.4 THERM IMAGE SET: Enter the submenu of
thermal image, which is displayed on both
videos.
2.1.5 PROGRAM: Enter the submenu of thermal camera enhancement function.
2.1.6 NTSC CAMERA: NTSC current mode.
2.1.7 CAM DEFAULT SET: Recover the camera’s default.
2.1.8 RESET PT: Recover the system.
2.1.9 EXIT: Exit the main menu.
MAIN MENU
= = = = = = = = = = = = = = = =
1 DISPLAY SETUP
2 CAMERA SETUP
3 CONTROL SETUP
4 THERM IMAGE SET
5 PROGRAM
6 NTSC CAMERA
7 CAM DEFAULT SET
8 RESET PT
9
EXIT

4
2.2 DISPLAY SETUP
2.2.1 ID DISPLAY: When this item is ON, the screen will show the address ID of thermal
camera, for example, “CAM 006”. Default is ON when power on.
2.2.2 ID POS: Set the address position. The address can be displayed at the four corners
of the screen: TOP-L (top left), TOP-R (top right), BOTT-R (bottom right), BOTT-L
(bottom left).
2.2.3 TITLE DIS: If this item is ON, the left of the screen will show the title of pre-setting
point when you adjust the pre-setting point. For example, “NO.001 ABCDEFGH”. If
there is no title of this point, it will only display “NO.001”.The modifying of pre-setting
point’s title is under the menu of P RO GRAM .
2.2.4 TITLE POS: Set the display position of pre-setting point’s title. It could be the first
line to the tenth line. When display CROSS or GRID, title will be show on the first
line.
2.2.5 CAM DISPLAY: If this item is “ON”, the camera’s self display will be open.
2.2.6 CROSS DIS: Screen appears cross in the center when it’s ON.
2.2.7 GRID DIS: It appears scale grid on screen when it’s ON.
2.2.8 PT ANGLE: It appears revolving angle of pan-tilt head when it’s ON.
2.2.9 RETURN: Return to the main menu.
2.3 CAMERA SETUP
2.3.1 SLOW SHUTTER: Frame adding function.
There are two options: automatic / manual.
2.3.2 BACK LIGHT: Back light compensation,
ON/OFF.
2.3.3 ICR SHOT: Low light level, ON—manually
open / AUTO—automatically control.
2.3.4 IRIS: Setup automatic iris, AUTO.
CAMERA SETUP
= = = = = = = = = = = = = = = = = = =
1 SLOW SHUTTER AUTO
2 BACK LIGHT OFF
3 ICR SHOT AUTO
4 IRIS AUTO
5 D-ZOOM ON
6 FOCUS AUTO
7 WB SET AUTO
8 MENU OF CAM
9 RETURN
DISPLAY SETUP
= = = = = = = = = = = = = = = =
1 ID DISPLAY ON
2 ID POS TOP-L
3 TITLE DIS ON
4 PRESET POS 0 1
5 CAM DISPLAY ON
6 CROSS DIS ALL
7 GRID DIS ALL
8 PT ANGLE ON
9 RETURN

5
2.3.5 D-ZOOM: Set digital zoom, ON / OFF.
2.3.6 FOCUS: Setup automatic focus. AUTO–automatically control / MANU–manual.
Note: when FOCUS is in the status of MENU, press "Focus Near "or "Focus Far"
can realize manual focus of camera; Exit the menu, press Near or Far can realize
manual focus of thermal imaging.
2.3.7 WB SET: White balance setup. ATW / INDOOR / OUTDOOR / ONEPUSH / AUTO /
MANU.
2.3.8 MENU OF CAM: This item is empty.
2.3.9 RETURN: Return to the main menu.
2.4 CONTROL SETUP
2.4.1 ALARM: this item is empty.
2.4.2 HOME OPTION: Enter the submenu of set
automatic return function.
2.4.2.1 AUTO HOME: When this item is “ON”,
open the automatic return function. It
means that if the user has no action
within a period of time, the camera will
return to HOME. When the camera is in
a state of patrolling, it will not return to HOME. When the camera doesn’t need
to return to HOME, please set this item in “OFF”.
2.4.2.2 HOME POS: HOME is the return point. For example, you need to setup a scene
as HOME, you should first adjust to this
scene, setup the pre-setting point as No.3,
then move to the menu and enter this
submenu; change the number behind
HOME POS into 3. This is OK. If you want to
make the automatic function take effect,
don’t forget to setup the AUTO HOME in “ON”. HOME POS can be from
pre-setting point 1-50.
2.4.2.3 DWELL TIME: Setup the automatic return time, which means how long it will
return to HOME without control. The time can be set from one minute to 99
minutes.
2.4.2.4 RETURN: Return to the last menu.
2.4.3 THERM-IMAGE: It is blank.
CONTROL SETUP
= = = = = = = = = = = = = = = = = =
1 ALARM /
2 HOME OPTION
3 THERM IMAGE OFF
4 WIPER OFF
5 WIPER MODE SERIES
6 RETURN
HOME OPTION
= = = = = = = = = = = = = = = = =
1 AUTO HOME ON
2 HOME POS 0 1
3 DWELL TIME 0 5 MIN
4 RETURN

6
2.4.4 WIPER: Wiper control item, with wiper mode, controls the wiper to move once or
continuously.
2.4.5 WIPER MODE: you can choose the single mode or continuous mode, the default is
continuously mode.
2.4.6 RETURN: Return to the main menu.
2.5 THERM IMAGE SET
2.5.1 VIDEO-LUT: Set thermal image switch in
WHITE hot, BLACK hot and Color Pallette,
which includes: FUSION ，RAINBOW ，
GLOBOW，IRONBOW1，IRONBOW2，SEPIA，COLOR1，COLOR2，ICE AND FIRE，
RAIN (palettes).
2.5.2 VIDEO-ZOOM: It can switch between normal /2x/4x.
2.5.3 RETURN: Return to main menu.
2.6 PROGRAM
2.6.1 AUTO PAN START POS: Setup pan start position. After you enter, use the joystick
to adjust the monitoring position. Push CLOSE key to save the current position and
return.
2.6.2 AUTO PAN END POS: Setup pan end position. After you enter, use the joystick to
adjust the monitoring position. Push CLOSE key to save the current position and
return.
2.6.3 RUN AUTO PAN: Press OPEN to start scan
function and exit the menu. Before running,
please first set up the start point and end
point of scan, which can be separately set by
the first and second item of the menu.
2.6.4 SET TITLE: Set the title of pre-setting point.
Only the former 63 pre-setting points can
have title. Use PAN LEFT/PAN RIGHT to
choose pre-setting points number, push
OPEN key-press to enter the edit state; push
CLOSE key-press to leave the edit state. The operation under the edit state please
refers to the back.
2.6.5 SET PATROL: Edit patrol tracking parameter.
Use PAN LEFT/PAN RIGHT to choose paths
number; use OPEN to enter the edit state,
push CLOSE key-press to leave the edit state.
PROGRAM
= = = = = = = = = = = = = = = = = =
1 AUTO PAN START POS
2 AUTO PAN END POS
3 RUN AUTO PAN
4 SET TITLE 0 1
5 SET PATROL 0 1
6 RUN PATROL 0 1
7 RECORD PATTERN
8 RUN PATTERN
9 RETURN
THERM IMAGE SET
= = = = = = = = = = = = = = = = =
1 VIDEO-LUT WHITE
2 VIDEO-ZOOM 1X
3 RETURN