DAPAudio PRE-202 User manual

PRE-202
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: D1533
MANUAL
ENGLISH
2 Channel Microphone Preamp

1
PRE-202 2 Channel Microphone Preamp
D1533
Warning
Every person involved with the installation, operation and maintenance of this system has to:
be qualified
follow the instructions of this manual
Only use the supplied DAP audio adapter.
Description
The PRE-202 is a 2 channel microphone solution, that combines high quality low noise preamps with a 48
volt phantom power supply. It also offers gain settings and a low cut function, that will help you to
eliminate unwanted stage rumble. The 48-volt phantom power supply is capable of powering almost any
condenser microphone. The PRE-202 is the ideal solution in an audio system, without phantom power,
where the use of normal or condenser microphones is desired.
Switchable Phantom power
Switchable low cut
Level control
Low noise preamps
Overview
Controls the input gain, channel 1.
Controls the input gain, channel 2.
Press the LOW CUT switch to activate the high-pass filter which blends out low-frequency noise (75
Hz, 12 dB/octave).
Phantom power is used for operating a condensor microphone.
Power on/off switch
Power adapter connector
Input 1, Balanced combo-type input for connecting low impedance microphones.
Output 1, Balanced XLR output connector.
Input 2, Balanced combo-type input for connecting low impedance microphones.
Output 2, Balanced XLR output connector
CAUTION!
Keep this device away from rain and moisture!

2
PRE-202 2 Channel Microphone Preamp
D1533
Connection Example

PRE-202 2 Channel Microphone Preamp
Dimensions
Specifications
Frequency Response:
20Hz-20KHz
Inputs:
XLR/Jack Combo
Outputs:
XLR male
Input sensitivity:
-50dBV
Max input voltage:
-4 dBu
Max output voltage:
+22 dBu
Power supply:
18V AC (adapter included)
Dimensions:
53x158x135 mm (HxWxD)
Weight:
0,67 Kg
©2013 DAP Audio