DAQ system ADP-CLR01 User manual

ADP-CLR01 user’s Manual
-1- http://www.daqsystem.com
Camera Link
Repeater
(ADP-CLR01)
User’s Manual
Windows, Windows2000, Windows NT and Windows XP are trademarks of Microsoft. We acknowledge that the
trademarks or service names of all other organizations mentioned in this document as their own property.
Information furnished by DAQ system is believed to be accurate and reliable. However, no responsibility is assumed by DAQ
system for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or copyrights of DAQ system.
The information in this document is subject to change without notice and no part of this document may be copied or
reproduced without the prior written consent.
Copyrights 2005 DAQ system, All rights reserved.

ADP-CLR01 user’s Manual
-2- http://www.daqsystem.com
-- Contents --
1. Introduction
2. Mechanical Dimension
- 7~12V DC DIN Connector (SN8-6P)
- 7~12V Connector (DC-005(2.0))
3. Product Contents

ADP-CLR01 user’s Manual
-3- http://www.daqsystem.com
1. Introduction
A Digital Camera is used to currently a lot of industrial equipments. However, direct
connection of a Frame Grab board and a camera gets from restriction of a distance by
equipment, organization.
The ADP-CLR01 provides two times distance (Max. 20m) between camera and frame grabber
using standard 10m Camera Link Cable. It is available for all cameras because of designed by
Standard Camera Link Interface.
[Features]
Supports Standard Camera Link Interface
Supports Camera link Full Mode
High Speed 85Mhz Pixel Clock
Supports LVAL, FVAL, DVAL Signals
SerTFG / SerTC Serial Communication
6 Pin Locking Type, Power connector
7~12V/DC Input Voltage --- Selectable Power Input Connector (DIN Connector or DC-jack)
Camera Clock Detection, Auto Reset
Transmit Distance --- Maximum 10M, Bi-direction 20M (Standard Base)

ADP-CLR01 user’s Manual
-4- http://www.daqsystem.com
The ADP-CLR01 application is shown in Figure 1 and 2.

ADP-CLR01 user’s Manual
-5- http://www.daqsystem.com
2. Mechanical Dimension

ADP-CLR01 user’s Manual
-6- http://www.daqsystem.com
-7~12V DC DIN Connector (SN8-6P)
Pin1
N.C
Pin2
+12V/DC
Pin3
+12V/DC
Pin4
GND
Pin5
GND
Pin6
GND
-7~12V CONNECTOR (DC-005(2.0))

ADP-CLR01 user’s Manual
-7- http://www.daqsystem.com
3. Product Contents
Product Contents
1. ADP-CLR01
2. 6 PIN DIN CONNECTOR (SN8-6P)
3. 12V DC Adapter
4. CD (Manual)