Darkglass Electronics Duality Dual Fuzz Engine User manual

user manuaL

Duality Fuzz
Dual Fuzz Engine
The Siamese Twins
The Duality is a unique fuzz pedal that contains two discrete fuzz
circuits—a gated saw-tooth wave and a raunchy high-gain
sound—which can be mixed together to yield a vast selection of
distinct sonic textures.
Warning
The Duality Fuzz has a current draw of 20mA. Only use a regulated
9V DC adapter with a center-negative plug. Due to ecological reasons
it does not accept batteries. Unregulated power supplies and/or
higher voltages may result in suboptimal noise performance and even
damage your unit, voiding the warranty.
Warranty
To activate the warranty, we encourage you to register your product
on: http://mypedal.darkglass.com and enter the serial number on
the back of your pedal.
Please contact us via email [email protected] before
shipping a product to us.
Controls
BLEND: Mixes the clean input signal with the overdriven signal. The
clean signal remains at unity gain while the volume of the overdriven
signal is set by the Level knob, allowing for fine control of the blend ratio.
LEVEL: Sets the volume of the overdriven signal.
DUALITY: Mixes two discrete fuzz circuits. Set it at minimum for a
pure gated saw-tooth wave, or crank it up for a tighter high gain
fuzz.
FILTER: Controls the amount of high frequency content in the fuzz
signal.
Disclaimer
In the interest of continuous improvement, specifications are subject
to change without notice. If you have any questions, please don’t
hesitate to contact us at www.darkglass.com
The manufacturer claims that the above product fulfills the
requirements as set by EN55013, EN55020, EN60555-2, EN60555-3,
RoHS, WEEE.

Duality Fuzz
Dual Fuzz Engine
The Siamese Twins
The Duality is a unique fuzz pedal that contains two discrete fuzz
circuits—a gated saw-tooth wave and a raunchy high-gain
sound—which can be mixed together to yield a vast selection of
distinct sonic textures.
Warning
The Duality Fuzz has a current draw of 20mA. Only use a regulated
9V DC adapter with a center-negative plug. Due to ecological reasons
it does not accept batteries. Unregulated power supplies and/or
higher voltages may result in suboptimal noise performance and even
damage your unit, voiding the warranty.
Warranty
To activate the warranty, we encourage you to register your product
on: http://mypedal.darkglass.com and enter the serial number on
the back of your pedal.
Please contact us via email [email protected] before
shipping a product to us.
Controls
BLEND: Mixes the clean input signal with the overdriven signal. The
clean signal remains at unity gain while the volume of the overdriven
signal is set by the Level knob, allowing for fine control of the blend ratio.
LEVEL: Sets the volume of the overdriven signal.
DUALITY: Mixes two discrete fuzz circuits. Set it at minimum for a
pure gated saw-tooth wave, or crank it up for a tighter high gain
fuzz.
FILTER: Controls the amount of high frequency content in the fuzz
signal.
Disclaimer
In the interest of continuous improvement, specifications are subject
to change without notice. If you have any questions, please don’t
hesitate to contact us at www.darkglass.com
The manufacturer claims that the above product fulfills the
requirements as set by EN55013, EN55020, EN60555-2, EN60555-3,
RoHS, WEEE.