DARTWOOD Mini Aroma Diffuser User manual

Mini Aroma Diffuser
User Manual

In the Box
Warning
1. Children should never be left unattended when this device is on or plugged in.
2. Keep away from other heating sources while in use, such as portable heaters,
radiators, stoves, open flames, etc.
3. Keep away from dust, dirt, smoke, and chemical/corrosive materials.
4. Make sure to clean and store safely after use.
5. Clean this device thoroughly before adding essential oil.
6. Overuse can cause damage to the device.
7. Only use 100% natural oils with this device, chemicals can damage the device.
8. Never drop or knock over this device.
9. Do not overfill with water.
10. This device can be affected by water type, humidity, temperature, and air
currents.
11. Never switch on this device when the tank is empty.
1 x mini aroma diffuser 1 x USB cable
Page 1

Introduction to Parts
cover max line
water tank
drainage
outletair outlet
base
outlet
dc socket
air intake
on /off
light
Page 2

How to Use
1. Plug one end of the USB cable into the device. Plug the other end into a USB
adapter or wall outlet.
2. Remove the water tank cover. Using a measuring cup to pour water into the
water tank (room - temperature). Do not exceed the max water line.
5.4 fl oz max water
Page 3

3. Add 5 - 10 drops of essential oil into the tank (optional / not included).
4. Place the cover back on the water tank.
Page 4

5. To turn on / off, press the mist button on the side of the diffuser. Press once for
continuous mist for around 10 hours of use. Press twice for intervals of 15
seconds on, 15 seconds off, and up to 20 hours of use.
Note: Device will turn off automatically if it runs out of water.
6. Press the light button on the side of the diffuser to turn on and change the light
color to your preference.
Page 5

Accidental Leakage
In the event the device gets knocked or tipped over during use, please do
the following:
1. Unplug the device and remove the cover.
2. Pour out any remaining water from the water tank.
3. Gently shake out any remaining water and let the device air dry for 24 hours.
Cleaning Guidelines
It is recommended that you clean the device after using it every 5 - 6 times.
Clean as follows:
1. Turn off the power and unplug the USB cable from the device.
2. Remove the cover.
3. Pour out any remaining water from the drainage outlet.
4. Pour a small amount of cleaning detergent and dilute it with water (use neutral
detergents only).
5. Dip a soft cloth into the detergent and gently wipe around the inside of the tank,
removing any dirt or built-up residue.
drainage outlet
Page 6

Troubleshooting
If the device fails to operate, please refer to the following:
Device fails to turn on.
Check the water level. Add water if there
is not enough, reduce water if it is above
the max line.
Check the water level. Check the USB
connection to the device / outlet.
Unplug and plug back in.
Check the water level. There may be some
dirt or built-up residue. Clean the device
thoroughly (including the air intake).
Check the device thoroughly. If there is
no damage, check the temperature and
humidity levels in the room (low
temperatures and high humidity may
cause the water to condense too quickly).
The device shut off
suddenly.
There is no mist or
the mist is abnormal.
Water leaking from
the product.
Page 7

Size:
Weight:
Input:
Cable length:
Electric consumption:
Mist mode:
Water capacity:
Material:
Accessories:
Ultrasonic vibration:
4.7 x 4.7 x 5.1 in
8.2 oz
DC 5V 1A
4.9 ft
5 W
continuous / intermittent
5.4 fl oz
PP / ABS
USB cable
3 M
Specifications
Page 8

Scan the QR code below or email us at: [email protected]
Get More Support