Data Video TC-200 User manual

TC-200
www.datavideo.com
Instruction manual
TITLE CREATOR

2
Table of Contents
FCC COMPLIANCE STATEMENT ..................................................................................... 3
WARNINGS AND PRECAUTIONS.................................................................................... 3
WARRANTY ................................................................................................................... 4
STANDARD WARRANTY ......................................................................................4
THREE YEAR WARRANTY ....................................................................................5
DISPOSAL ...................................................................................................................... 5
INTRODUCTION............................................................................................................. 6
FEATURES ........................................................................................................6
MINIMUM COMPUTER REQUIREMENTS: ................................................................6
EXAMPLE SET UP WITH TC-200..................................................................................... 7
CONNECTIONS & CONTROLS ........................................................................................ 8
FRONT PANEL...................................................................................................8
REAR PANEL.....................................................................................................9
FIRMWARE UPDATE .................................................................................................... 10
SPECIFICATIONS .......................................................................................................... 14
SERVICE & SUPPORT ................................................................................................... 16
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times,
Datavideo Technologies will try to give correct, complete and suitable information. However,
Datavideo Technologies cannot exclude that some information in this manual, from time to time,
may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the
information in this document for accuracy before making any purchase decision or using the
product. Datavideo Technologies is not responsible for any omissions or errors, or for any
subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting
your local Datavideo Office or dealer.

3
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or nea r water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may
fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided
for ventilation. To ensure safe and reliable operation of this unit, and to
protect it from overheating, do not block or cover these openings. Do
not place this unit on a bed, sofa, rug, or similar surface, as the
ventilation openings on the bottom of the cabinet will be blocked. This
unit should never be placed near or over a heat register or radiator. This
unit should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should only be operated from the type of power source
indicated on the marking label of the AC adapter. If you are not sure of
the type of power available, consult your Datavideo dealer or your local
power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit
where the power cord will be walked on, rolled over, or otherwise
stressed.
9. If an extension cord must be used with this unit, make sure that the
total of the ampere ratings on the products plugged into the extension
cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a
single wall outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet
ventilation slots, as they may touch dangerous voltage points or short
out parts that could result in risk of fire or electric shock. Never spill
liquid of any kind onto or into this unit.

4
12. Except as specifically explained elsewhere in this manual, do not
attempt to service this product yourself. Opening or removing covers
that are marked “Do Not Remove” may expose you to dangerous
voltage points or other risks, and will void your warranty. Refer all
service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service
personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal
operating conditions. Adjust only those controls that are covered by
the operating instructions in this manual; improper adjustment of
other controls may result in damage to the unit and may often
require extensive work by a qualified technician to restore the unit
to normal operation;
e. When the product has been dropped or the cabinet has been
damaged;
f. When the product exhibits a distinct change in performance,
indicating a need for service.
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing defects
for one year from the date of purchase.
•The original purchase invoice or other documentary evidence should be
supplied at the time of any request for repair under warranty.
•The product warranty period beings on the purchase date. If the
purchase date is unknown, the product warranty period begins on the
thirtieth day after shipment from a Datavideo office.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit or
water is not covered under warranty.
•Viruses and malware infections on the computer systems are not
covered under warranty.
•Any errors that are caused by unauthorized third-party software
installations, which are not required by our computer systems, are not
covered under warranty.
•All mail or transportation costs including insurance are at the expense of
the owner.

5
•All other claims of any nature are not covered.
•Cables and batteries are not covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st,
2017 are qualified for a free two years extension
to the standard warranty, providing the product is
registered with Datavideo within 30 days of
purchase.
•Certain parts with limited lifetime expectancy such as LCD panels, DVD
drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting,
Camera module, PCIe Card are covered for 1 year.
•The three-year warranty must be registered on Datavideo's official
website or with your local Datavideo office or one of its authorized
distributors within 30 days of purchase.
Disposal For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates
that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can
drop off your waste equipment for recycling, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
CE Marking is the symbol as shown on the left of this page.
The letters "CE" are the abbreviation of French phrase
"Conformité Européene" which literally means "European
Conformity". The term initially used was "EC Mark" and it
was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.
"CE Marking" is now used in all EU official documents.

6
Introduction
Thank you for purchasing the Datavideo TC-200, Title Creator, overlay box.
The TC-200 can be used with Datavideo’s Windows based Character
Generator software such as CG-200, CG-250, CG-350 and CG-500.
The TC-200 is designed to be portable and rugged as well as quick and easy
to set up in the field. It allows producers to create professional CG overlays
with a Windows laptop instead of transporting a high end desktop PC with
PCIe cards fitted.
This manual will cover the TC-200 overlay box only, a separate manual is
provided with the supplied Character Generator software.
Features
•HDMI input for laptop CG overlay input*.
•HD-SDI video input for overlay or optional genlock
•Two HD-SDI outputs can be configured as separate Key & Fill outputs or
as CG overlay with video
•Supports video resolutions up to 1080i including PAL & NTSC
•Unit can be powered from Battery DC voltage when using an accessory
battery mounting plate [ 7 to 15 V DC Input ].
•Dip switches for easy to follow configuration
*An optional DVI to HDMI cable or Display Port adaptor to HDMI cable may be required
depending on the laptop being used.
Minimum computer requirements:
Please refer to separate CG software manual.

7
Example Set Up with TC-200

8
Connections & Controls
Front Panel
Mode Select
The DIP switch allows the user to configure the
following TC-200 settings.
SDI Output
Fill & Key channel outputs

9
Power LED
Turned ON when power is connected.
Rear Panel
HD/SD - SDI Input
The SDI IN connects an SDI video source via an
SDI cable.
PC Input (HDMI)
Connect a video input from the PC via an HDMI
cable.
Ethernet Port (RJ-45)
10/100M Ethernet Network Interface for FW
upgrade

10
DC In Socket
Connect the supplied 12V PSU to this socket. The
connection can be secured by screwing the outer
fastening ring of the DC In plug to the socket.
Firmware Update
Datavideo usually releases new firmware containing new features or
reported bug fixes from time to time. Customers can either download the
TC-200 firmware as they wish or contact their local dealer or reseller for
assistance.
This section outlines the firmware upgrade process which should take
approximately 10 minutes to complete.
The existing TC-200 settings should persist through the firmware upgrade
process, which should not be interrupted once started as this could result in
a non-responsive unit.
Successful firmware upgrade on TC-200 requires:
•TC-200 x 1
•12V Power adapter x 1
•Windows PC x 1
•Ethernet Cable x 1
•Flash Update Software (the software can be downloaded from the
official website)
Procedure
1. Connect the TC-200 to a Windows PC via the Ethernet interface.
Note: TC-200 has a default IP address of 192.168.0.211.
2. Set the PC’s IP address to 192.168.0.11.