manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Data Video
  6. •
  7. Rack & Stand
  8. •
  9. Data Video TTL-100 User manual

Data Video TTL-100 User manual

Other Data Video Rack & Stand manuals

Data Video WM-11 User manual

Data Video

Data Video WM-11 User manual

Data Video LBK-2 User manual

Data Video

Data Video LBK-2 User manual

Data Video RP-55 User manual

Data Video

Data Video RP-55 User manual

Data Video RMK-1 User manual

Data Video

Data Video RMK-1 User manual

Data Video RMK-2 User manual

Data Video

Data Video RMK-2 User manual

Data Video PTR-10 User manual

Data Video

Data Video PTR-10 User manual

Data Video CM-10 User manual

Data Video

Data Video CM-10 User manual

Data Video WM-10 User manual

Data Video

Data Video WM-10 User manual

Data Video WM-1 Series User manual

Data Video

Data Video WM-1 Series User manual

Data Video RKM-572 User manual

Data Video

Data Video RKM-572 User manual

Popular Rack & Stand manuals by other brands

Dynex DX-MP3MT Quick setup guide

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer 24185 manual

Konig & Meyer

Konig & Meyer 24185 manual

ECG LD 326501 instruction manual

ECG

ECG LD 326501 instruction manual

Philips SB7S19S/00 quick start guide

Philips

Philips SB7S19S/00 quick start guide

Woodline KIT-250 lb instructions

Woodline

Woodline KIT-250 lb instructions

ricoo S1222 installation instructions

ricoo

ricoo S1222 installation instructions

Kanto P301 user manual

Kanto

Kanto P301 user manual

VidaBox VB MNT FFS2 installation guide

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL PLWIN60C user manual

PROEL

PROEL PLWIN60C user manual

AllMounts PLB-43S instruction manual

AllMounts

AllMounts PLB-43S instruction manual

VMP VH-001 instruction sheet

VMP

VMP VH-001 instruction sheet

Nederman SYSTEM 920/400 instruction manual

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon ORBIS POST MOUNTING KIT installation guide

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics LGR105 manual

Songmics

Songmics LGR105 manual

Grape GM401 user manual

Grape

Grape GM401 user manual

FourStarGroup 11225296 manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF FLR100 installation instructions

CHIEF

CHIEF FLR100 installation instructions

FEC XDCAM EX PMW-EX30 manual

FEC

FEC XDCAM EX PMW-EX30 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

THROUGH THE LENS KIT FOR TLM-700 TTL-100
1
Instruction Manual
TTL-100
THROUGH THE LENS KIT
FOR TLM-700
THROUGH THE LENS KIT FOR TLM-700 TTL-100
1
Contents
FCC COMPLIANCE STATEMENT ..................................................................................................................................... 2
WARNINGS AND PRECAUTIONS.................................................................................................................................... 2
GLASS –HANDLE WITH CARE .................................................................................................................................................. 3
WARRANTY .................................................................................................................................................................. 4
STANDARD WARRANTY........................................................................................................................................................... 4
REGISTER FOR 3YEAR WARRANTY............................................................................................................................................. 4
DISPOSAL ............................................................................................................................................................................. 4
PACKING LIST........................................................................................................................................................................ 5
PRODUCT OVERVIEW ................................................................................................................................................... 6
FEATURES............................................................................................................................................................................. 6
ASSEMBLY .................................................................................................................................................................... 7
CAMERA EXPOSURE AND THE 60/40 GLASS.............................................................................................................................. 10
TLM-700 MONITOR SETUP .................................................................................................................................................. 10
CLEANING THE 60/40 GLASS ................................................................................................................................................. 11
FREQUENTLY ASKED QUESTIONS .................................................................................................................................12
SPECIFICATIONS...........................................................................................................................................................13
SERVICE AND SUPPORT ...............................................................................................................................................15
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will
try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some
information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing
errors, omissions or incorrect information. Datavideo Technologies always recommend that you double check the
information in this document for accuracy before making any purchase decision or using the product. Datavideo
Technologies is not responsible for any omissions or errors, or for any subsequent loss or damage caused by using the
information contained within this manual. Further advice on the content of this manual or on the product can be obtained
by contacting your local Datavideo Office or dealer.
THROUGH THE LENS KIT FOR TLM-700 TTL-100
2
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe and
reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do
not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the
cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit
should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking label of the
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local
power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked
on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the
products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15
amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid
of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself.
Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous voltage
points or other risks, and will void your warranty. Refer all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only those
controls that are covered by the operating instructions in this manual; improper adjustment of other
controls may result in damage to the unit and may often require extensive work by a qualified technician
to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
THROUGH THE LENS KIT FOR TLM-700 TTL-100
3
GLASS –Handle with care
This product contains a sheet of 60/40 mirror glass please handle it with care.
To avoid a risk of damage or injury please follow this instruction manual and use caution
when transporting, un-packing, cleaning, assembling or dis-assembling this part of the
product.
THROUGH THE LENS KIT FOR TLM-700 TTL-100
4
Warranty
Standard Warranty
Datavideo equipment are guaranteed against any
manufacturing defects for one year from the date of
purchase.
The original purchase invoice or other documentary
evidence should be supplied at the time ofany request
for repair under warranty.
The product warranty period begins on the purchase
date. If the purchase date is unknown, the product
warranty period begins on the thirtieth day after
shipment from a Datavideo office.
All non-Datavideo manufactured products (product
without Datavideo logo) have only one year warranty
from the date of purchase.
Damage caused by accident, misuse, unauthorized
repairs, sand, grit or water is not covered under
warranty.
Viruses and malware infections on the computer
systems are not covered under warranty.
Any errors that are caused by unauthorized third-party
software installations, which are not required by our
computer systems, are not covered under warranty.
All mail or transportation costs including insurance are
at the expense of the owner.
All other claims of any nature are not covered.
All accessories including headphones, cables, and
batteries are not covered under warranty.
Warranty only valid in the country or region of
purchase.
Your statutory rights are not affected.
Register for 3 year Warranty
All Datavideo products purchased after July 1st, 2017
are qualified for a free two years extension to the
standard warranty, providing the product is registered
with Datavideo within 30 days of purchase.
Certain parts with limited lifetime expectancy such as
LCD panels, DVD drives, Hard Drive, Solid State
Drive, SD Card, USB Thumb Drive, Lighting, Camera
module, PCIe Card are covered for 1 year.
The three-year warranty must be registered on
Datavideo's official website or with your local
Datavideo office or one of its authorized distributors
within 30 days of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the
product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the abbreviation of French
phrase "Conformité Européene" which literally means "European Conformity". The term initially used was
"EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking"
is now used in all EU official documents.
THROUGH THE LENS KIT FOR TLM-700 TTL-100
5
Packing List
Item
Description
Quantity
A
Aluminium monitor mounting bracket
1
B
Aluminium camera mounting bracket
1
C
Small ¼ screw to attach camera to item A
1
D
Large 9mm ¼ screw to attach item A to the TLM-700 monitor
1
E
Adhesive cloth strips
2
F
1.5mm rubber washer to attach to item C
2
G
Cloth Snood/Hood
1
H
Cloth support strip with press studs
1
I
Velcro strips for TLM-700 monitor
2
J
60/40 Mirror Glass with Green and Red sticker
1
THROUGH THE LENS KIT FOR TLM-700 TTL-100
6
Product Overview
The TTL-100 kit turns your Datavideo TLM-700K / TLM-
700UHD into a “through the lens” monitor allowing you to
see any HDMI source directly in front of the camera lens.
The TTL-100 kit is ideal for maintaining eye contact when
video conferencing or allowing the talent to monitor
themselves while keeping their eye level centre of the
camera lens.
.
Features
A low-cost accessory kit that turns the TLM-700K /
TLM-700UHD into a “through the lens” monitor.
Can be mounted to all tripods and light stands
Can be used with web conferencing software such
as Zoom for remote interviews, allows you to see
your guest while looking directly into the centre of
the camera lens.
Can be used for online presentations / webinars.
Allows the talent to see themselves while looking
directly into the centre of the camera lens.
Web cameras with ¼ threads can be mounted
directly to the TTL-100
A wide range of larger cameras can be mounted
behind the TTL-100 when used freestanding
THROUGH THE LENS KIT FOR TLM-700 TTL-100
7
Assembly
1. Attach the Velcro strips (Item I) to both sides of the TLM-700
monitor lip as shown.
2. Attach the cloth hood (Item G) to the Velcro strips on both sides
of the TLM-700 monitor.
3. Attach the cloth support strip with press studs (Item H) to both
sides of the cloth hood (Item G). Ensure the support strip is
pulled tight and the hood is upright.
4. If you intend to use the TTL-100 in freestanding in front of a
camera, attach the aluminium monitor bracket (Item A) to the
TLM-700 monitor using the large ¼ screw (Item D).
THROUGH THE LENS KIT FOR TLM-700 TTL-100
8
If you intend to mount a small box camera or webcam directly
to the TTL-100, attach the aluminium monitor bracket (Item A)
and the aluminium camera bracket (Item B) to the TLM-700
monitor using the large ¼ screw (Item D).
5. Insert the 60/40 mirror glass (Item J) into the hood (Item G)
with the green sticker facing you and the Velcro strip at the top,
the bottom of the glass should rest on top of the TLM-700
monitors lip, secure the glass with the Velcro at the top.
6. Optionally attach your small box camera or web camera to the
aluminium camera bracket (Item B) using the small ¼ screw
and 1.5mm rubber washer (Item F) if required. The position of
the camera can be adjusted by loosening screws Ca
7. Pull the weighted cloth snood over your camera and ensure
there is no light entering the hood, any light entering the hood
may reflect off the glass and back into the camera lens.
THROUGH THE LENS KIT FOR TLM-700 TTL-100
9
8. If your camera has LED lights that cannot be turned off, these
can be covered using the supplied cloth strips (Item E)
9. Attach the aluminium monitor bracket (Item A) to a tripod using
one of the ¼ threads.