Datacom Systems VS-1200 Series User manual

© 2009 Datacom Systems Inc
Datacom Systems Inc
Access Your NetworkTM
October 2009 guide
VS-1200 Series
Data Access Switch
541-0127-U-A.01
USER
VS-1200 Series Data Access Switch

Product Description
The VERSAstream™ VS-1200 Series Data Access Switches are adaptable. All
ports are Any-to-Any ports and can be configured by the Command Line
Interface (CLI) to be either input or output ports. Aggregationoffers a complete
view ofthe traffic and easily lets security and analysis tools collect allthe data
they need, expanding network visibility.
The DatacomSystem VERSAstream™ VS-1200 Data Access Switch series
supports your ability to specifically apply your peripheral network tools to the
analysis requirements and adapt with your ever-changing network.

All rights reserved. No parts of this work maybe reproduced in anyform or byanymeans - graphic, electronic, or
mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the
written permission of the publisher.
Products that are referred to in this document maybe either trademarks and/or registered trademarks of the
respective owners.The publisher and the author make no claim to these trademarks.
While everyprecaution has been taken in the preparation of this document, the publisher and the author assume no
responsibilityfor errors or omissions, or for damages resulting from the use of information contained in this
document or from the use of programs and source code that mayaccompanyit.In no event shall the publisher and
the author be liable for anyloss of profit or anyother commercial damage caused or alleged to have been caused
directlyor indirectlybythis document.
Printed: October 2009 in East Syracuse, New York
VS-1200 Data Acccess Switch
© 2009 Datacom Systems Inc

5Contents
© 2009 Datacom Systems Inc
Table of Contents
Section 1 Terms of Use 7
................................................................................................................................... 71 Copyright
................................................................................................................................... 72 License Agreement
................................................................................................................................... 73 Trademark Attribution
................................................................................................................................... 74 Proprietary Notice
................................................................................................................................... 75 Certificationsand Marks
................................................................................................................................... 86 Safety Noticesand Warnings
Section 2 Overview 9
................................................................................................................................... 91 VS-1200 SeriesSummary
................................................................................................................................... 102 What Shipped?
................................................................................................................................... 103 VS-1200 SeriesFeaturesand Benefits
................................................................................................................................... 114 VS-1200 SeriesCommon Specifications
................................................................................................................................... 115 VS-1200 SeriesModel Specific Specifications
Section 3 Hardware 13
................................................................................................................................... 131 VS-1200 SeriesFront Panels
................................................................................................................................... 142 Front Panel Description
.......................................................................................................................................................... 14Power .......................................................................................................................................................... 14Any-to-Any Ports
.......................................................................................................................................................... 15Management Port
................................................................................................................................... 153 Rear Panel Description
.......................................................................................................................................................... 16Serial DB9 .......................................................................................................................................................... 16Power Switch (SFP series)
.......................................................................................................................................................... 16Rear Label (BT series)
.......................................................................................................................................................... 16Rear Labeling (SFP series)
.......................................................................................................................................................... 16Input Power
Section 4 Initial Configuration 17
................................................................................................................................... 171 Command Line Interface (CLI)
.......................................................................................................................................................... 17Basic Functionality
.......................................................................................................................................................... 18Password Recovery
.......................................................................................................................................................... 18Basic Commands (Read Only Access)
......................................................................................................................................................... 18HELP(HE) or (?)
......................................................................................................................................................... 19SHOW (SH)
......................................................................................................................................................... 19SHOW PRODUCT(SHPR)
......................................................................................................................................................... 20SHOW TIME(SHTI)
......................................................................................................................................................... 20SHOW MANAGEMENT(SHMA)
......................................................................................................................................................... 20SHOW GROUPS (SHGR)
......................................................................................................................................................... 21SHOW PORT CONFIG (SHPO CO)
......................................................................................................................................................... 21SHOW PORT ROUTING (SH PO RO)
.......................................................................................................................................................... 22Superuser Commands (Configuration Access)
......................................................................................................................................................... 22SU(SU) ......................................................................................................................................................... 22SUSET PASSWORD(SUSEPA)
......................................................................................................................................................... 22SHOW USERS (SHUS)

VS-1200 Data Acccess Switch6
© 2009 Datacom Systems Inc
......................................................................................................................................................... 22SET PROMPT (SEPR)
......................................................................................................................................................... 23SET IP(SEIP), SUBNET (SU), GATEWAY (GA)
......................................................................................................................................................... 23SET DATE(SEDA)
......................................................................................................................................................... 24SET TIME(SETI)
......................................................................................................................................................... 24SET PORT NAME(SEPO NA)
......................................................................................................................................................... 24SET PORT SPEED (SEPO SP)
......................................................................................................................................................... 24SET PORT MONITOR (SEPO MO)
......................................................................................................................................................... 25SET PORT VTAG (SEPO VT)
......................................................................................................................................................... 25SET PORT GROUP(SEPO GR)
......................................................................................................................................................... 25ADDUSER(ADUS)
......................................................................................................................................................... 25EDITUSER(EDUS)
......................................................................................................................................................... 26DELETEUSER(DEUS)
................................................................................................................................... 262 SERIAL Port Configuration (DB9)
.......................................................................................................................................................... 26HyperTerminal
................................................................................................................................... 273 MANAGEMENT Port Configuration (RJ45)
.......................................................................................................................................................... 27HyperTerminal
.......................................................................................................................................................... 28TELNET
................................................................................................................................... 284 IP AddressConfiguration
.......................................................................................................................................................... 28IP Address Configuration with HyperTerminal
.......................................................................................................................................................... 32IP Address Configuration with TELNET
................................................................................................................................... 365 Exercise - CLI Setting Ports
................................................................................................................................... 406 Small Form-Factor Plug Module
.......................................................................................................................................................... 40Intallation Prerequisites
.......................................................................................................................................................... 40Safety Guidelines
.......................................................................................................................................................... 41Installing the SFP Module
.......................................................................................................................................................... 41Removing the SFP Module
Section 5 Hardware Installation 43
................................................................................................................................... 431 Power
................................................................................................................................... 432 Any-to-Any Connection
................................................................................................................................... 443 Management Connection
Section 6 VS-1200 Series Functional Drawing 45
Section 7 Application 47
................................................................................................................................... 471 Gathering the Data (HyperTerminal configuration example)
................................................................................................................................... 50
2 All Pluggable in Optical Network (TELNET configuration
example)
Section 8 Customer Service 53
................................................................................................................................... 531 Internet
................................................................................................................................... 532 Warranty
................................................................................................................................... 533 Limitsof Liability

Terms of Use 7
© 2009 Datacom Systems Inc
1 Terms of Use
The following terms and conditions relate to the use ofthis document. Please note that Datacom
Systems Inc. reserves the right, at its entire discretion, to change, modify, add, or remove portions of
these Terms ofUse at any time. Please read the Terms ofUse carefully as your use ofthis document
is subject to the Terms ofUse stipulated herein.
1.1 Copyright
Copyright©2009 byDatacomSystems, Inc. Allrights reserved. Printed in the United States of
America. No part ofthis publication maybe reproduced, stored ina retrievalsystem, or transmitted,
in any formor by any means, electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission ofDatacomSystems, Inc. To obtain this permission, write to the
attention ofthe DatacomSystems legaldepartment at 9 Adler Drive, East Syracuse, New York
13057-1290, or call315-463-9541.
1.2 License Agreement
Notice To All Users: Byusing DatacomSystems, Inc. products, you agree to the terms set forth.
No licenses, express or implied, are granted with respect to the technologydescribed and Datacom
Systems, Inc. retains allrights withrespect to the technology described herein. Ifapplicable, you
may returnthe product to the place ofpurchase for a fullrefund.
1.3 Trademark Attribution
Access Your Network , DS3 ACTIVEtap , DS3switch , ETHERNETtap , Empowering
Network Professionals , FDDIswitch , FIBERsplitter , FIBERswitch , FIBERSWITCH-
system , FLOWcontrol , GIGABITswitch , INSERTswitch , INSERTunit , LANswitch ,
LINKprotect , MANAgents , MULTINETswitch , NETspan , PERMAlink , PROline ,
RMON SWITCHINGanalyzer , SINGLEstream , UNIVERSALswitch , VERSAstream ,
and WANswitch are trademarks ofDatacomSystems, Inc. 1ST in Switching Solutions®,
DATACOMsystems®, LANclipper®, MANAgents®, and MULTIview®are registered trademarks
ofDatacomSystems, Inc. Allother registered and unregistered trademarks are the sole property of
their respective owners. Allspecifications may be changed without notice.
1.4 Proprietary Notice
This document contains proprietary information about the VS-1200 familyofproducts and is not to
be disclosed or used except as authorized bywritten contract withDatacomSystems, Inc.
1.5 Certifications and Marks
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

VS-1200 Data Acccess Switch8
© 2009 Datacom Systems Inc
The CE logo indicates that this equipment has beentested and found to meet radiated
and conducted emission to the European Community EMC Directive 89/336/EEC
requirements as per EN 61000-6-3:2001, the generic emissions standard for
residential, commercialand light industrialdevices, the limits are those for anEN 55022 Class A
product.
This equipment also has beentested and found to meet the immunitylevels for residential,
commercialand light industrialdevices according to EN 61000-6-1:2001, the interference severity
levels to the standards and requirements ofEN 61000-3-2 Harmonic Current, EN 61000-3-3
Voltage Fluctuations and Flicker, EN 61000-4-2 Electrostatic Discharge, EN 610004-3 Radiated
Susceptibility, EN 61000-4-4 ElectricalFast Transient/Burst, EN 61000-4-5 Surge and EN
61000-4-6 Conducted Susceptibility.
This equipment has completed the Product SafetyReview and found to meet the Low Voltage
Directive 98/68/EEC requirements to the standards ofEN 60950 Safety of Information Technology
Equipment.
The RoHS compliant logo indicates that this electronic product does not exceed the limit
requirements oftoxic, hazardous substances or elements as set forth in Directive
2002/95/EC of the European Parliament and of the Council of27 January 2003 on
the restriction ofthe use ofcertainhazardous substances in electricaland electronic equipment.
The crossed out wheelie bin logo signifies that the product canbe recycled after being
discarded, and should not be casually discarded as set forth inDirective 2002/96/EC of
the European Parliament and of the Councilof27 January 2003 on waste electricaland
electronic equipment (WEEE).
1.6 Safety Notices and Warnings
These explanatory labels are included in this information for the user in
accordance withthe requirements ofIEC 60825.1.
WARNING: Class 1 laser andLED product. A class 1 laser is safe under
all conditions of normal use. Invisible laser radiationmay be emitted
fromoptical port openings when no fiber cable is connected, avoid
exposure to laser radiation and do not stare into open optical ports.

Overview 9
© 2009 Datacom Systems Inc
2 Overview
The configurable VS-1200 family ofproducts increases network visibilityand leverages your
investment in network analyzers, probes, and security equipment by allowing you to simultaneously
monitor as manysupported configurable ports as you may need to fit your peripheralnetwork tools.
Greater visibility accelerates problemresolution, reduces downtime and increases enterprise
productivity.
The configurable family ofproducts are compatible with allvendor hardware and can be controlled
by our Command Line Interface (CLI) software, which will allow you to controlallof your
configurable family of products through a single interface regardless ofwhat network appliances you
choose to deploy.
2.1 VS-1200 Series Summary
The configurable VERSAstream Data Access Switch can combine data frommultiple Ethernet
network segments into one data stream. A single Gigabit device/tool, such as anintrusiondetection
system, protocolanalyzer, or network probe can receive the aggregated data withjust one network
interface card (NIC).
The configurable product can also have additionalinput/output ports or Any-to-Anyports, so
multiple Gigabit devices can receive the same data stream. This allows different network tools to
collect data fromthe same network segments at the same time, eliminating contention for access to
the network. Also, these ports canbe configured as more input ports to include more network
segments for monitoring.
Network administrators no longer need a separate toolfor each network segment to achieve
simultaneous 24x7 monitoring ofmultiple links, nor do they need to "switch"to a different segment to
collect data fromit. A VS-1200 series unit simultaneously collects data frommultiple network
segments and aggregates allthe data before sendingit to the connected network tools, expanding
network visibility and reducing the number oftools needed onthe network And, because the VS-
1200 series aggregates allthe data before sendingit to the connected network tool, you can always
view the entire conversation even in asymmetric routing, redundant, and load-balanced
environments.
Aggregation gives a complete view of traffic. Instead ofcollecting and manually assembling trace or
log files fromseparate tools onseparate network segments, the VS-1200 lets security and analysis
tools collect the data ina single file. Insecurityapplications, events and false positives are recorded
fewer times. Inallapplications, data can be analyzed faster than ever, increasing uptime and saving
money.
The VERSAstream™Data Access Switch VS-1200 series is adaptable; allports can be configured
to be input or output ports. These switches adapt with your ever-changing network.

VS-1200 Data Acccess Switch10
© 2009 Datacom Systems Inc
2.2 What Shipped?
VS-1200 Series Data Access Switch
1 — Model:VS-1200 series Data Access Switch
2 — Switching AC Adapters
2 — AC Line Cords
1 — DRL512-2M-R serialcable, DB9 M/F straight thru
1 — USERguide
2.3 VS-1200 Series Features and Benefits
·Connect any Gigabit devices or tools (protocolanalyzers, probes, intrusion detection
systems) for permanent simultaneous monitoring ofmultiple full-duplexlinks — eliminates the
need for network connectors to be disconnected and reconnected each time a segment
needs to be monitored.
·Multi-point analysis enables you to seamlessly analyze a packet at multiple points in your
network with one tool- know exactly what is happening to data as it moves through your
network.
·View allthe data frommultiple network segments - allows you to monitor and analyze traffic
fromasymmetric routing paths, load-balanced applications, and redundant environments.
·Any-to-Any ports allow Gigabit devices to simultaneously monitor the same links, providing
extended securityand analysis options, while eliminating contention for network access.
Also, these ports can be configured as more input ports to include more network segments
for monitoring.
·Simple, easyto use Command Line Interface (CLI) configurationto adapt to your
network’s setup.
·Easy to install1U space saving design.
·2-year limited manufacturer’s warranty on hardware.
·DatacomCustomer Service Support is available via:
Phone:[phone]
Fax:(315 ) 463-9557
E-mail:[e-mail]
Website:www.datacomsystems.com

Overview 11
© 2009 Datacom Systems Inc
2.4 VS-1200 Series Common Specifications
Management Port (front): RJ45 @ 100 Mbps Full-Duplex
The factory configured IP Address, Subnet Mask and Default Gateway are as follows:
IP Address: 192.168.1.1; Subnet Mask: 255.255.255.0; Default Gateway: 0.0.0.0
Serial Port (rear): DB9
Power Requirement: Two external power adapters
Input: 100 - 240VAC 50 - 60Hz, 0.4-0.2 A — Output: 5VDC, 2.5A
Certified : CE, UL, CUL, CSA, TUV, CCC, PSE, JET, EU RoHS and China RoHS
Power Consumption: 12W; BTU/h: 40.9
Operating Temperature: 32º to 104° F — 0º to 40° C
Storage Temperature: -22º to 149° F — -30º to 65° C
Operating Range Relative Humidity: 5 to 90% non-condensing
Dimensions (H x W x D): includes RMC-2 rack mount bracket
1.750 x 7.950 x 7.775 inch
4.44 x 20.19 x 19.75 cm
Weight: 1.5 lbs; shipping: 6.5 lbs — 0.68 kg; shipping; 2.95 kg
Warranty: Two (2) years - see 'Warranty' section for details.
2.5 VS-1200 Series Model Specific Specifications
VS-1204BT: Any-to-Any Ports: 4 - 10/100/1000BaseT (RJ45 Connectors)
VS-1204SFP: Any-to-Any Ports: 4 - SFP*
VS-1206SFP: Any-to-Any Ports: 6 - SFP*
VS-1208BT: Any-to-Any Ports: 8 - 10/100/1000BaseT (RJ45 Connectors)
VS-1210BT/SFP: Any-to-Any Ports: 8 - 10/100/1000BaseT (RJ45 Connectors), 2 - SFP*
VS-1210SFP: Any-to-Any Ports: 10 - SFP*
*SFP = Small Form Pluggable can be LX, SX or 1000Mbs copper
(Support Datacom supplied only)
53

Hardware 13
© 2009 Datacom Systems Inc
3 Hardware
Front panelimages ofthe VS-1200 series are provided in this section.
3.1 VS-1200 Series Front Panels
VS-1204BT
VS-1204SFP
VS-1206SFP
VS-1208BT
VS-1210BT/SFP
VS-1210SFP

VS-1200 Data Acccess Switch14
© 2009 Datacom Systems Inc
3.2 Front Panel Description
This section provides a illustration and description of the front panelofthe VS-1200 series.
An explanation of each front panellegend follows:
3.2.1 Power
Two switching AC adapter power supplies are provided for each configurable unit. Although only
one power supply is required to power the module, use ofa second independent power source is
strongly recommended to assure uninterrupted monitoring. Furthermore, connecting the second AC
input power socket to a different externalpower source circuit thanthe first AC input power source
eliminates power as a single point offailure. The power barrelsockets are located onthe rear.
3.2.2 Any-to-Any Ports
Designated as INPUT or OUTPUT by 'Superuser' for use as input or output ports. See Serialand
Management Port - Command Line Interface - Superuser Commands - 'SET PORT MONITOR
(SE PO MO)' section for more information.
Ports:1to 8(VS-1210BT/SFP or VS-1208BT):
Ports:1to 4(VS-1204BT ):
are RJ45 connectors used for connection to network devices or tools. These jacks have integrated
LEDs that displayline status and line speed ofeachport. See the Any-to-Any RJ-45 LED Display
Code table for LED display codes.
Ports:1to 10 (VS-1210SFP):
Ports:1to 6(VS-1206SFP):
Ports:1to 4(VS-1204SFP):
Ports:9to 10 (VS-1210BT/SFP):
are sockets used with a smallform-factor plug (SFP) module for connection to network devices or
tools. They can be connected through fiber or copper, or a mix of each.

Hardware 15
© 2009 Datacom Systems Inc
LX-BT/SX-BT - The LEDs located to the right ofthe SFP connectors are solid green indicating a link
has been detected between the respective Any-to-Any Rx port and network device/toolTx port or
network segment. The LEDs are flashing green when data is passed.
LX-SFP/SX-SFP/VS-SFP - The LED located below and slightly left ofcenter ofthe SFP connectors
are solid green indicating a link has been detected between the respective Any-to-Any Rx port and
network device/toolTxport or network segment. The LED flashes greenwhendata is passed. The
LED located below and slightly right ofcenter ofthe SFP connectors indicates the line speed of
each port. See the Any-to-Any SFP LED Display Code table for LED display codes.
3.2.3 Management Port
The MANAGEMENT PORT is an RJ45 socket used for 100 Mbs full-duplex connection with a
straight-through LAN cable via your management LAN to a Remote Management Console which is
a standard PC using any Telnet terminalemulation application.
Link indicates connection. The LED DisplayCode table deciphers the RJ45 jacks withintegrated
LEDs that display line status of the MANAGEMENT PORT.
3.3 Rear Panel Description
This section provides a description ofthe rear panelof the VS-1200 series.
or
An explanation of each rear panellegend follows:

VS-1200 Data Acccess Switch16
© 2009 Datacom Systems Inc
3.3.1 Serial DB9
The SERIAL connector port is a shielded DB9 Female and is cabled to the COM port ofany
compatible network toolor PC where HyperTerminalsoftware resides. It is the only port that can
easily connect the Management PC to set the IP address (default 192.168.1.1) for the first time.
3.3.2 Power Switch (SFP series)
The front panelPOWER 1, POWER 2 LEDs are illuminated green, respectively, when the DC power
switch is depressed ON and DC power is available at both the two rear DC power sockets. Either
POWER 1, POWER 2 LED illuminated red indicates a defective power source and immediate
investigation as to the cause is required to insure redundant power integrity.
3.3.3 Rear Label (BT series)
DB9 nomenclature, SerialNumber (SN) identifier, Media Access Control(MAC) address
identifier, input power requirements, certification compliance identifiers and various other information
are provided on this rear label.
3.3.4 Rear Labeling (SFP series)
SerialNumber (SN) identifier, Media Access Control(MAC) address identifier, input power
requirements, certification compliance identifiers and various other information are provided on this
rear label.
3.3.5 Input Power
Two DC input power sockets are provided on the rear panel. The front panelPOWER 1 and 2
LEDs are illuminated green, respectively:
·(SFP series) - when the DC POWER switch is depressed ON and DC power is available at
both the two rear DC power sockets; or
·(BT series) - when DC power is available at both the two rear DC power sockets.
Either POWER 1 or 2LED not illuminated whenpowered, indicates a defective power source and
immediate investigation as to the cause is required to insure redundant power integrity.
Although only one switching AC adapter power supply is required to power the configurable unit,
use ofa second independent power source is strongly recommended to assure uninterrupted
monitoring. Furthermore, connecting the second DC input power socket to a different external
power source circuit thanthe first DC input power source eliminates power as a single point of
failure.

Initial Configuration 17
© 2009 Datacom Systems Inc
4 Initial Configuration
IMPORTANT: Prior to initial configuration of the hardware, it is imperative to review the
entire Initial Configuration section before proceeding to the Installation section.
This section explains the considerations and requirements for the initialconfiguration ofthe VS-1200
series bya Command Line Interface (CLI) with a management PC using a terminalemulation
application connected either through the SERIAL DB9 port or though the MANAGEMENT RJ45
port. Only one configuration session can be open at a time.
4.1 Command Line Interface (CLI)
The Command Line Interface (CLI ) is used to:
·set IP address (default 192.168.1.1), Subnet Mask (default 255.255.255.0) and Gateway
(default 0.0.0.0)
·set port speed and duplex
·enables the user to select whichports or groups of ports receive the data streamcopies
·allows Any-to-Any ports to be configured as either inputs or outputs.
The VS-1200 series factory default is off for all Any-to-Any ports.
4.1.1 Basic Functionality
WindowSize Functionality: The CLI window is limited to 24 lines per screen and 80 characters
per line. If more data than can fit is presented, a “-more-” prompt is shown on the last line.
Character Handling: Printable character (ASCII code 32-126) and non-printable noted below:
Non-Printable Character Description
·<enter key> Executes command; places command in history buffer
·<backspace key> Erases previous character entry; removes history buffer entry
Connectivity/Authentication Functionality: Connectivity to the configurable product is made
throughthe Management RJ45 or SerialDB9 port and authentication is required. This password
protection yields read-only access. To make configuration changes, Superuser (SU) mode must be
accessed with another password. See the 'Superuser Commands ' section for more information.
Base Prompt: This is the text presented to the user logging in to use the CLI (default values
shown). AllUsernames and passwords are case-sensitive.
Enter Username:Administrator
Enter Password:admin
>
Superuser log in:
Example:> SU
Enter Password:password
#
22

VS-1200 Data Acccess Switch18
© 2009 Datacom Systems Inc
4.1.2 Password Recovery
Password Recoveryis provided for cases where a user has forgottenthe Superuser and/or
Administrator login password. Password recovery is accomplished by connecting to the unit serially
using a HyperTerminallike programand rebooting the unit. As the power-up sequence is occurring,
depress <Control> <C>. Upon receipt of this command, a text recovery key willbe generated and
displayed prior to the prompt. This keyis used to reset the passwords. An example recoverykey
prompt is:617A6185774$
You must callDatacomService Center with this recovery key in order to obtain the required
response to reset passwords. Givena valid reset response, the factory default passwords willbe
saved in Non-Volatile memory. Ifan invalid response is given, a new recovery key will be calculated
and displayed at the prompt, as described above, after first clearing the screen.
4.1.3 Basic Commands (Read Only Access)
The following section shows the long formof the basic command set with the shortcut input for the
command noted in parenthesis. Allcommands, either the exact long formor the shortcut form, are
entered after the prompt (default >) at the cursor. No auto-fillmode is available. After the topic
heading, a briefoverview of the command display function is given followed by an example
(Example:>) command input.
4.1.3.1 HELP (HE) or (?)
Whenthis command is entered, a list ofcommands, their shortcut inputs, and their descriptions will
display. For the use and application ofeach command, refer to the individualcommand description
within this section. The HELP command displays the available commands as shown:
Example: > ?
Available commands:
HELP HE / ? Show Help
EXIT EX Exit Shell
SHOW SH Show All Current Configurable Values
SHOW PRODUCT SH PR Show Product Name and Serial Number
SHOW TIME SH TI Show System Date and Time
SHOW MANAGEMENT SH MA Show Management Configuration
SHOW PORT CONFIG SH PO CO Show Port Configuration
SHOW PORT ROUTING SH PO RO Display Routing Summary
SHOW GROUPS SH GR Show Group Configuration
SU SU Enter Superuser Mode
SU SET PASSWORD SU SE PA Set Superuser Password
SHOW USERS SH US Display Users
SET IP SE IP Set IP
SET SUBNET SE SU Set Subnet Mask
SET GATEWAY SE GA Set Default Gateway
SET PROMPT SE PR Set Command Prompt (max 32 bytes)
SET DATE SE DA Set System Date
SET TIME SE TI Set System Time
SET PORT NAME SE PO NA Set Port Name (max 32 bytes)
SET PORT SPEED SE PO SP Set Port Speed

Initial Configuration 19
© 2009 Datacom Systems Inc
SET PORT MONITOR SE PO MO Set Monitor Configuration
SET PORT VTAG SE PO VT Set Port VTAG Stripping
SET PORT GROUP SE PO GR Set Group Name
ADD USER AD US Add User
EDIT USER ED US Change Username/Password
DELETE USER DE US Delete User
4.1.3.2 SHOW (SH)
Usingthis command alone, displays generalinformationabout the product as shown:
> SHOW (SH)
Date/Time
Product
Serialnumber
Version
Management port MAC address
Management port IP Address
Management port IP Subnet
Management port IP Default Gateway
Management port IP Port
Example:> SH
Date/Time: 10-09-2007 12:05:31
Product: VS-1210BT/SFP
SerialNumber: 9326023
Version: 5.2.0.0
MAC Address: 00-14-E2-0C-0D-0E
IP Address: 192.168.1.1
IP Subnet: 255.255.255.0
IP Default Gateway: 0.0.0.0
IP Port: 2370
4.1.3.3 SHOW PRODUCT (SH PR)
This displays the name, serialnumber, and firmware versionofthe product as shown:
> SHOW PRODUCT (SH PR)
Product Name
SerialNumber
Firmware Version (x.x.x.x = boot loader. major micro. minor micro. build)
Example:> SH PR
Product: VS-1210BT/SFP
SerialNumber: 9326023
Version: 5.2.0.0

VS-1200 Data Acccess Switch20
© 2009 Datacom Systems Inc
4.1.3.4 SHOW TIME (SH TI)
This command displays the set date and time for the product, it is entered as shown:
> SHOW TIME (SH TI)
DATE and TIME
Example:> SH TI
Date/Time 10-09-2007 12:40:25
4.1.3.5 SHOW MANAGEMENT (SH MA)
This command displays Management RJ45 port information as shown:
> SHOW MANAGEMENT (SH MA)
MAC Address
IP Address
IP Subnet
IP Default Gateway
IP Port
Example:> SH MA
MAC Address: 00-14-E2-00-23-9F
IP Address: 192.168.1.50
IP Subnet: 255.255.255.0
IP Default Gateway: 192.168.1.2
IP Port: 2370
4.1.3.6 SHOW GROUPS (SH GR)
This command displays allports as designated by the administrator (Superuser) as belongingto the
same logicalgroup. Specifically, groups canbe configured as ifthey were a single logicalport,
enabling a high degree of controlduring both the initialsetup and allsubsequent moves or changes.
The GROUP NAME followed bythe ports included in the group are displayed. It is entered and
displays data as shown:
> SHOW GROUPS (SH GR)
GROUP NAME
Port ingroup (Port number:Port name)
Port ingroup (Port number:Port name)
Example:> SH GR
TAP:9:Port 9
10:Port 10