Datalogic 94ACC0163 User manual

INSTRUCTIONS
©2017 Datalogic S.p.A. and/or its affiliat s. All rights r s rv d.
Datalogic and th Datalogic logo ar r gist r d trad mar
ks of
Datalogic
S.p.A. in many countri s, including th U.S. and th E.U.
Rhino is a
trad mark of Datalogic S.p.A. and/or its affiliat s. All oth r
brand and
product nam s may b trad marks of th ir r sp ctiv
own rs.
www.datalogic.com
94ACC0163 Antenna, Roof Mount Dome, 4 dBi, 2.4 to
5.9 GHz
Genera Features
Ant nna, Roof Mount Dom , 4 dBi, 2.4 to 5.9 GHz xt nds W-Lan conn ctivity of VMC.
Th pack contains th following compon nts
•1x Top cov r 50mm with RP TNC
conn ctor
•1x Ant nna cabl RP-TNC, N 3 m
•1x Omnidir ctional calott 4 dBi, 2,4 to
5,9 GHz, N
Assemb ing of Omnidirectiona ca otte 4 dBi, 2.4 to 5.9 GHz
Th Omnidir ctional calott 4 dBi, 2.4 to 5.9
GHz must b install d via 2 scr ws. Th
maximum diam t r of th scr ws shouldn’t b
tall r than 4 mm. To conn ct th ant nna cabl
RP-TNC, N 3 m prop rly th r must b a whol
with a diam t r b tw n 35 mm to 40 mm.
Connect Omnidirectiona ca otte 4 dBi, 2.4 to 5.9 GHz with VMC
Th conn ctor with th small r out r diam t r
must b conn ct d to th VMC.
Th conn ctor with th bigg r out r diam t r
must b conn ct d to th Omnidir ctional calott
4 dBi, 2.4 to 5.9 GHz
Rhino II
Ant nna
Scr ws not
includ d

INSTRUCTIONS
Conn ct th
Ant nna cabl RP
-
TNC, N 3 m
to th
VMC
Cabl contact with small r out r diam t r
To fix th cabl prop rly to th VMC you must
scr w th conn ct r clockwis
R mov th blu conn ctor cov r from th
Omnidir ctional calott 4 dBi, 2.4 to 5.9 GHz
Install th oth r sid of th ant nna cabl RP-
TNC, N 3 m to th Omnidir ctional calott 4 dBi,
2.4 to 5.9 GHz
To fix th cabl prop rly you must scr w th
conn ct r clockwis
check that the correct Antenna configuration is enab ed
Op n th “Laird Conn ction Manag r”
(Start >>
All Programs >> Laird >> Laird Conn ction
Manag r) and navigat to th “Configuration”
tab.
Click on th “Manag Profil s” button
A n w window app ars
Navigat to th
“
Globals
”
tab
Ch ck that th valu of th prop rti s “TX
Div rsity” and “RX Div rsity” is s t to “Main
only”.
If not chang th m and click on “Commit”.