Datalogic AccuLazr AL5010 User manual

AL5010
Product Line Manual
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

AccuLazr™ AL5010 Product Line Manual
PN 1000068393 2.1 | CMS 11-0023 | 2013.01.31 | RAY
Document Revision Control
This document is under revision control in accordance with Datalogic’s Quality
System. Any addenda or other documents associated with this manual are under
separate revision controls. A revision number is changed by 0.1 whenever
technical information is changed or added to a document.
Copyright Information
Copyright © 2011-2012 DATALOGIC. All rights reserved.
No part of this document is to be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying, recording, or by an
information storage and retrieval system without prior written consent of
Datalogic Systems, Inc. All drawings and specifications contained in this manual
are the property of Datalogic Systems, Inc. and shall not be reproduced, copied
or used in whole or in part as the basis for the sale or manufacture of products
without the written permission.
Datalogic and DRX® are registered trademarks and the AS logotype, 1-800-
BAR-CODE™ is a trademark of Datalogic.
All other company or product names are mentioned for purposes of identification
only, and may be trademarks of their respective owners.
Disclaimer Information
The information contained in this manual is subject to change without notice.
Supplemental information or documentation may be required for certain
applications or usage.
The examples and diagrams in this manual are included solely for illustrative
purposes. Because of the many variables and requirements associated with any
particular installation, Datalogic cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Datalogic with respect to use of information,
circuits, equipment, or software described in this manual.
In no event will DATALOGIC. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
Datalogic 511 School House Rd. Telford, PA 18969 1-800-BAR-CODE™
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

AccuLazr™ AL5010 Product Line Manuals Contents iii
Contents
Preface
Intended Audience ......................................................................................... vii
Thank You...................................................................................................... vii
Overview of Contents.................................................................................... viii
Other Sources of Information........................................................................ viii
Conventions .................................................................................................. viii
Customer Service ......................................................................................... viii
1 Introduction
AL5010 Product Line Overview .......................................................................9
The AL5010 Scan Head ................................................................................10
The AL5010 Mounting Base ..........................................................................10
The AL5010 Interface Module.......................................................................11
AccuLazr™ User Interface.............................................................................12
Typical AL5010 Mid-Range Bar Code Reading Applications ........................13
Options and Accessories ...............................................................................14
2 Safety
Symbols .........................................................................................................15
General Precautions ......................................................................................16
Unpacking, Mounting and Installation Recommendations ............................16
Compliance Requirements ............................................................................17
Electrical Safety .............................................................................................17
Electrical Grounding Requirements...............................................................18
Electrostatic Discharge ..................................................................................18
Basic Rules for ESD Control..........................................................................18
Laser Safety...................................................................................................19
Safety Labels and Locations..........................................................................20
3 Mechanical Installation
Prerequisites ..................................................................................................21
Tools Required...............................................................................................21
Additional Information ....................................................................................21
Unpacking Instructions ..................................................................................21
Installation Sequence.....................................................................................22
Orientation Considerations ............................................................................23
Read Range...................................................................................................23
Bar Code Orientation to Scanning Area .......................................................24
General Mounting Guidelines ........................................................................25
Reader Positioning.........................................................................................25
Dimensions and Clearances..........................................................................26
Attaching the Mounting Base.........................................................................26
Attaching the Universal Mounting Bracket (UMB) .........................................27
Installing an AL5010 Scan Head ...................................................................28
Mounting the Trigger Photoeye .....................................................................29
Mounting the Tachometer..............................................................................30
Mounting the Interface Module ......................................................................31
Mounting the I/O Modules..............................................................................34
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

iv Contents AccuLazr™ AL5010 Product Line Manuals
4 Electrical Installation
Prerequisites ..................................................................................................37
Tools Required.............................................................................................. 37
Additional Information ....................................................................................37
Installation Sequence(s) ................................................................................38
Installing Multiple Readers.............................................................................38
General Electrical Installation Guidelines and Precautions...........................39
Cable and Conduit Connections ....................................................................40
Wiring the AL5010 Interface Modules............................................................41
Power Requirements .....................................................................................45
Power Supply Connections............................................................................45
Trigger Connections.......................................................................................46
Tachometer Connections...............................................................................47
Serial Communications Connections (COM1 and COM2) ............................48
Ethernet Communications Connections ........................................................50
I/O Module Connections ................................................................................51
DeviceNet......................................................................................................53
Profibus ..........................................................................................................53
Connecting the AL5010 .................................................................................53
Wiring to the AL5010 without an Interface Module........................................54
Check Installation...........................................................................................55
5 Setup
Getting Started...............................................................................................57
AccuLazr User Interface Basics.....................................................................60
Getting Help ...................................................................................................60
Modify Settings ..............................................................................................61
Configuration ...........................................................................................62
Bar Codes................................................................................................63
Modulo Checks........................................................................................65
Stripping/Padding ....................................................................................66
Match Codes ...........................................................................................67
Serial Communications ...........................................................................68
Network ...................................................................................................71
Trigger .....................................................................................................74
Relay .......................................................................................................75
Tracking...................................................................................................76
FAST Monitor™.......................................................................................77
Advanced.................................................................................................79
Save / Retrieve ..............................................................................................80
Diagnostics ....................................................................................................81
Monitor.....................................................................................................82
Log Viewer...............................................................................................83
Update Firmware.....................................................................................90
6 Operations
First-time Startup ...........................................................................................91
Default Parameters ........................................................................................91
First-time Setup..............................................................................................92
Check Operations using Test Mode ..............................................................92
Operations Checklist......................................................................................93
Control Panel Indicators ................................................................................94
Backup / Restore Procedures........................................................................99
Checking Operations with User Interface ....................................................100
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

AccuLazr™ AL5010 Product Line Manuals Contents v
Standalone Operation ..................................................................................102
Tracking Operation ......................................................................................103
Dual X-Scanning Operation .........................................................................104
Multiple-Reader Network Operation ............................................................105
Scanning Array / Tunnel Operation .............................................................106
7 Maintenance
Laser Shutoff Procedure..............................................................................107
Maintenance Tasks......................................................................................108
Cleaning Exit Window ..................................................................................109
Cleaning Trigger Photoeye ..........................................................................110
Cleaning Tachometer...................................................................................110
Tighten Mounting Hardware ........................................................................111
Checking Interface Module Connections.....................................................111
Verify Reader Operation ..............................................................................112
Verify Photoeye Operation...........................................................................112
Verify Tachometer Operation.......................................................................112
8 Troubleshooting
Test Mode ....................................................................................................113
Status Indicators ..........................................................................................113
Control Panel Indicators ..............................................................................114
Diagnostics ..................................................................................................117
Log Viewer ...................................................................................................120
Update Firmware .........................................................................................126
Troubleshooting Tables ..............................................................................131
9 Service
Replacement Procedures ............................................................................129
AL5010 Field Replaceable Units (FRUs) Spare Parts ...............................130
Interface Module FRU Spare Parts .............................................................131
Appendices
A Specifications
Al5010 Technical Specifications ..................................................................133
Basic Interface Module Technical Specifications ........................................133
Enhanced Interface Module Technical Specifications ................................134
Power Supply...............................................................................................134
Output Modules............................................................................................135
Input Modules ..............................................................................................135
Certifications ................................................................................................136
B Read Charts
AL5010 Read Charts ...................................................................................137
C User Interface
AccuLazr User Interface ..............................................................................149
Modify Settings ............................................................................................150
Configuration .........................................................................................151
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

vi Contents AccuLazr™ AL5010 Product Line Manuals
Bar Codes..............................................................................................153
Modulo Checks......................................................................................155
Stripping/Padding ..................................................................................156
Match Code Patterns.............................................................................157
Serial Communications .........................................................................161
Network .................................................................................................166
Trigger ...................................................................................................170
Relay .....................................................................................................172
Tracking.................................................................................................174
FAST Monitor™.....................................................................................176
Advanced...............................................................................................177
Save / Retrieve ............................................................................................179
Diagnostics ..................................................................................................181
Monitor...................................................................................................182
Log Viewer.............................................................................................184
Update Firmware...................................................................................185
D Networking Guide
.................................................................................................................... 187
E FAST Monitor Configuration
.....................................................................................................................207
F Installation Drawings
.....................................................................................................................209
G Test Label for Adjustable Raster Setup
.....................................................................................................................231
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

!""#$%&'()!$*+,+)-'./#"0)$123)4%2#%56! "#$%&'$! ())!
! !
-'37%"3)
*$+',-$!.,!./$!!""#$%&'()!$*+,+)-'./#"0)$123)4%2#%5!%#,-!0''123,#.!
345.$-56!78'9!:/)5!15$#!-&81&+!)8'+1;$5!./$!)8%,#-&.),8!4,1!8$$;!.,!
)8.$<#&.$!$%%$'.)($+4!./$!!$*+,+)6%')7./3)83%/3'!=)./!4,1#!&>>+)'&.),89!7.!
',8.&)85!;$.&)+$;!)8%,#-&.),8!&?,1.!./$!%,++,=)8<@!
!! "#,;1'.!%$&.1#$56!'&>&?)+).)$56!5>$')%)'&.),85!&8;!&''$55,#)$5!
!! 3&%$.4!)8%,#-&.),8!
!! 785.&++&.),8!<1);$+)8$5!&8;!>#,'$;1#$5!!
!! A,8%)<1#)8<!./$!0BCDED!%,#!4,1#!&>>+)'&.),8!!
!! F&)8.$8&8'$!&8;!:#,1?+$5/,,.)8<!
:/)5!>#$%&'$!$G>+&)85!/,=!./)5!15$#!-&81&+!)5!,#<&8)H$;!&8;!)8.#,;1'$5!
,./$#!5,1#'$5!,%!)8%,#-&.),8!./&.!4,1!=)++!%)8;!15$%1+9!
82032/3/)!#/132"3)
I,1!5/,1+;!/&($!&!?&5)'!18;$#5.&8;)8<!,%!?&#!',;$!5'&88)8<9!JK1)>-$8.!
)85.&++$#5!-15.!?$!%&-)+)&#!=)./!5.&8;&#;!=)#)8<!.$'/8)K1$5!&8;!.$#-)8,+,<49!
L$'&15$!./$!0''1B&H#!15$#!)8.$#%&'$!5,%.=&#$!#185!,8!&!=$?!?#,=5$#!)8!./$!
F)'#,5,%.M!*)8;,=5M!$8()#,8-$8.6!4,1!5/,1+;!N8,=!/,=!.,!15$!&!-,15$6!
'/,,5$!',--&8;56!&8;!=,#N!=)./!=)8;,=5!&8;!;)&+,<!?,G$59!
:/)5!-&81&+!',8.&)85!5,-$!.$#-5!./&.!-&4!?$!18%&-)+)&#9!!O5$!./$!<+,55&#4!
&.!./$!?&'N!,%!./)5!-&81&+!%,#!&55)5.&8'$9!
9:%2;)<.#)
:/&8N!4,1!%,#!15)8<!&8!0BCDED!?&#!',;$!5'&88)8<!5,+1.),8!&8;!./)5!-&81&+9!!
*$!(&+1$!4,1#!',--$8.5!&8;!%$$;?&'N9!P$$+!%#$$!.,!+$.!15!N8,=!=/&.!4,1!
+)N$!,#!;)5+)N$!&?,1.!0BCDED!Q,#!./)5!-&81&+R!?4!$2-&)+)8<!15!&.!
"#$%&'()%*')"%#&(+,-')'.%/"0&0%*9!!
I,1!'&8!&+5,!-&)+!4,1#!',--$8.5!.,!,1#!',#>,#&.$!/$&;K1&#.$#5!&;;#$55!,#!
'&++!15!;)#$'.+4!&.!E2SDD2L0T2AUVJW!,#!QXECR!YXZ2D[SE9!
!
!
=>9?@):/$#$!-&4!?$!&;;).),8&+!-&.$#)&+!./&.!=&5!8,.!&(&)+&?+$!=/$8!./)5!
>#,;1'.!-&81&+!=&5!>#,;1'$;9!:,!+$&#8!)%!./$#$!)5!&!;,'1-$8.&.),8!1>;&.$6!
<,!.,!,1#!=$?!5).$\5!',##$5>,8;)8<!>#,;1'.!>&<$!&. Datalogic website.
!
>0:3')A.#'"36).7)827.'B%01.2)
I,1!'&8!'/,,5$!%#,-!-&84!)8%,#-&.),8!5,1#'$56!)8'+1;)8<!;,'1-$8.&.),86!
.#&)8)8<6!&8;!51>>,#.!5$#()'$56!.,!)8'#$&5$!4,1#!N8,=+$;<$!&8;!
18;$#5.&8;)8<!,%!./$!0BCDED!?&#!',;$!5'&88)8<!5,+1.),859!7%!./)5!-&81&+!
#$%$#5!4,1!.,!,./$#!;,'1-$8.&.),86!15$!,8+4!./$!+&.$5.!($#5),85!18+$55!
,./$#=)5$!5>$')%)$;9!
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

viii Preface AccuLazr™ AL5010 Product Line Manuals
Conventions
WARNINGS or CAUTIONS: This symbol identifies a hazard or
procedure that, if incorrectly performed, could cause personal injury or
result in equipment damage. It is also used to bring the user’s attention to
details that are considered IMPORTANT.
HIGH VOLTAGE CAUTION: This symbol alerts the user they are about
to perform an action involving, either a dangerous level of voltage, or to
warn against an action that could result in damage to devices or electrical
shock.
LASER CAUTION: This symbol alerts the user they are about to perform
an action involving possible exposure to laser light radiation.
ESD CAUTION: This symbol identifies a procedure that requires you take
measures to prevent Electrostatic Discharge (ESD) e.g., use an ESD wrist
strap. Circuit boards are most at risk. Please follow ESD procedures.
NOTES: This symbol draws attention to details or procedures that may be
useful in improving, maintaining, or enhancing the performance of the
hardware or software being discussed.
NOTE REGARDING DIMENSIONAL REFERENCES: This manual
provides all dimensional references in inches and in most cases Metric
referenced in brackets, for example 10 inches [254 mm].
Customer Service
Training
Accu-Sort Systems offers a complete set of training courses to help you and
your staff get the most out of your investment. We can help you develop a
training plan that provides thorough training for both your project team and
your end users. We will work with you to organize courses appropriate to
your job or area of responsibility. Training professionals can show you how
to plan your training throughout the implementation process so that the right
amount of information is delivered to key people when they need it the most.
You can attend courses at our training center, or you can arrange for our
trainers to teach at your facility. In addition, we can tailor standard courses or
develop custom courses to meet your needs.
Support
From on–site support to central support, our team of experienced
professionals provides the help and information you need to keep your
equipment working for you. This team includes your Account Manager and
Accu-Sort’s large staff of support specialists with expertise in your business
area and managing your hardware and software environment.
NOTE: If you have any problems or questions that require Accu-Sort's
assistance, direct your calls to Customer Service at 1-800-BAR-CODE™ or
[phone].
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

1 Introduction
This chapter presents an introductory description of the AccuLazr™ AL5010
laser barcode scanner product line including:
AL5010 Product Line Overview
AccuLazr User Interface
AL5010 Product Line Overview
The AL5010 line of laser barcode readers is designed with industrial and
manufacturing applications in mind, providing high-speed scanning and high
reliability in a rugged industrial enclosure. The entire AL5010 product line
offers a large depth of field that provides accurate barcode reading from as
little as 4 inches up to 48 inches.
The AccuLazr AL5010 Mid-Range Laser Barcode Readers include:
AL5010 Scan Head
AL5010 Mounting Base
AccuLazr Interface Module (optional)
Power Supply Module (optional)
AL5010 Barcode Reader AccuLazr Basic Interface Module
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]

AL5010 Scan Head
The AL5010 Scan Head incorporates the optics and laser module(s) for
scanning barcodes as well as the decoding engine and parameter storage
module. The control panel provides several LED status indicators and three
function buttons.
There are five models of the AL5010 Scan Head (each available with
optional adjustable raster):
One-laser models for standard and high-density
Two-laser models for standard, near-focus high-density and high-density
An optional Adjustable Raster (adjustable up to 20-degrees above or below
0-degrees, variable DOF) is available in the existing scan head housing. No
bolt-on additions are required.
AL5010 Mounting Base
The AL5010 Mounting Base provides for the mounting of the AL5010 as well
as the wiring interface between the scan head and AccuLazr Interface
Module. It includes a parameter storage module that enables parameters to
be uploaded/downloaded with the ‘hot-swappable’ scan head.
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [email protected]