Datalogic MAGELLAN 8300 Installation and operation manual

MagellanTM 8300/8400
Product Reference Guide

Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]
© 2006-2013 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic
ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted
a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal busi-
ness purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic repre-
sentative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided
on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Dat-
alogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and
the E.U. All other brand and product names may be trademarks of their respective owners.
Magellan is a registered trademark of Datalogic ADC, Inc. in many countries, including the U.S.A. and the E.U.
4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879 • 4786798 • 4792666 • 4794240 • 4798943 • 4799164 •
4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 • 4939356 • 4943127 • 4963719 • 4971176 •
4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 • 5146463 • 5179270 • 5198649 •
5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 • 5233169 • 5235168 •
5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 • 5311000 •
5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 •
5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 •
5491328 • 5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 •
5594231 • 5594441 • 5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 •
5664231 • 5666045 • 5671374 • 5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 •
5750976 • 5767502 • 5770847 • 5786581 • 5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 •
5822343 • 5825009 • 5834708 • 5834750 • 5837983 • 5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 •
5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 • 5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 •
6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 • 6065676 • 6069696 • 6073849 • 6073851 • 6094288 •
6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 • 6166375 • 6169614 • 6173894 • 6176429 •
6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6244510 • 6259545 • 6260763 • 6266175 • 6273336 • 6276605 •
6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 • 6332577 • 6343741 • 6454168 •
6478224 • 6568598 • 6578765 • 6705527 • 6857567 • 6974084 • 6991169 • 7051940 • 7170414 • 7172123 • 7201322 • 7204422 •
7215493 • 7224540 • 7234641 • 7243850 • 7374092 • 7407096 • 7490770 • 7495564 • 7506816 • 7527198 • 7527207 • 7537166 •
7562817 • 601 26 118.6 • AU703547 • D312631 • D313590 • D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127
• D350735 • D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565 • D372234 • D374630 • D374869 •
D375493 • D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • D606544 •EP0256296 • EP0260155 •
EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 • EP0498366 • EP0531645 • EP0663643 • EP0698251 •
EP01330772 • EP870761 • GB2252333 • GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 •
GB2333163 • GB2343079 • GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 •
JP2513442 • JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • RE40071

Product Reference Guide i
Table of Contents
Chapter 1. Introduction .............................................................................................................................................................. 1-1
Manual Overview ........................................................................................................................................... 1-1
How to Use This Manual ....................................................................................................................... 1-2
Technical Support .......................................................................................................................................... 1-4
Datalogic Website Support ................................................................................................................... 1-4
Reseller Technical Support ................................................................................................................... 1-4
Telephone Technical Support ............................................................................................................... 1-4
......................................................................................................................................................................... 1-4
Scanner and Scanner/Scale Nomenclature ................................................................................................ 1-5
Connections .................................................................................................................................................... 1-6
Physical Parameters ..................................................................................................................................... 1-7
Scanning ................................................................................................................................................. 1-7
Deactivating EAS Labels ....................................................................................................................... 1-7
Weighing ................................................................................................................................................. 1-8
Warm-Up Time ....................................................................................................................................... 1-9
Electrical Specifications .............................................................................................................................. 1-10
Power Supply ....................................................................................................................................... 1-11
Laser and Product Safety ........................................................................................................................... 1-12
Canadian Notice ................................................................................................................................... 1-13
Labeling ......................................................................................................................................................... 1-14
Agency Compliances .................................................................................................................................... 1-15
Bar Codes Supported ................................................................................................................................... 1-17
Retail Codes .......................................................................................................................................... 1-17
Industrial Codes ................................................................................................................................... 1-17
Dual Bar Codes for Japan (2 label read) ............................................................................................. 1-18
Chapter 2. Site Preparation and Installation ........................................................................................................................... 2-1
Models ............................................................................................................................................................. 2-2
Pre-Installation Considerations ................................................................................................................... 2-3
Checkstand Design ........................................................................................................................................ 2-4
Scanner Installation ....................................................................................................................................... 2-5
Scanner Maintenance ................................................................................................................................... 2-5
References ...................................................................................................................................................... 2-5
Scanner Usage ............................................................................................................................................... 2-5
Site Preparation Overview ............................................................................................................................ 2-6
Ventilation and Spacing ................................................................................................................................ 2-8
Service Access .............................................................................................................................................. 2-10
Power Installation ....................................................................................................................................... 2-10
Grounding ............................................................................................................................................. 2-10
Checkstand Preparation ............................................................................................................................. 2-11
Liquid Spills and Moisture .................................................................................................................. 2-12
Counter Cutout ............................................................................................................................................. 2-12
Checkstand Mounting ......................................................................................................................... 2-20

ii MagellanTM 8300/8400
Checkstand Vibration .......................................................................................................................... 2-20
Installation Overview ................................................................................................................................... 2-20
Unpacking ............................................................................................................................................. 2-21
Operational Verification ...................................................................................................................... 2-22
Diagnostic Modes ................................................................................................................................ 2-25
Cables & Connections .......................................................................................................................... 2-26
Remote Scale Display Placement/Installation ......................................................................................... 2-28
Lighting Considerations ...................................................................................................................... 2-28
Viewing Angle ....................................................................................................................................... 2-29
Remote Display Cabling ...................................................................................................................... 2-30
Placing and Installing the Remote Scale Display ............................................................................. 2-30
Changing Weighing Modes ................................................................................................................. 2-33
Set-Up & Installation ................................................................................................................................... 2-33
Set-up ................................................................................................................................................... 2-33
Installation ............................................................................................................................................ 2-35
System Power-Up Recap ............................................................................................................................ 2-39
Chapter 3. Operation and Maintenance ................................................................................................................................... 3-1
Scanning Items ...................................................................................................................................... 3-1
Deactivating Security Labels ................................................................................................................ 3-3
Proper Weighing Technique .................................................................................................................. 3-4
Operational Controls ...................................................................................................................................... 3-5
Operational Modes ........................................................................................................................................ 3-5
Power-Up/Selftest & Pre-Operation .................................................................................................. 3-5
Operating Mode ..................................................................................................................................... 3-7
Additional Functions ..................................................................................................................................... 3-8
Programming ......................................................................................................................................... 3-8
Diagnostic Mode .................................................................................................................................... 3-8
Scanner and Scale Reset ....................................................................................................................... 3-9
Scale Adjustments ................................................................................................................................. 3-9
Operational Maintenance ........................................................................................................................... 3-11
Vertical Scan Window Replacement .................................................................................................. 3-12
Horizontal Scan Window Replacement (WRG) ................................................................................. 3-15
Chapter 4. Problem Isolation ..................................................................................................................................................... 4-1
Diagnostic Procedures .................................................................................................................................. 4-2
Error Codes ..................................................................................................................................................... 4-3
Scale Error Reporting ..................................................................................................................................... 4-6
Flowcharts ...................................................................................................................................................... 4-7
Chapter 5. Calibration................................................................................................................................................................. 5-1
Description of Calibration Sequence ............................................................................................................ 5-2
Motion Test ..................................................................................................................................................... 5-3
Automatic Zero Tracking Test ...................................................................................................................... 5-3
Preparing the Scanner/Scale for Calibration .............................................................................................. 5-4
Calibrating the Scale (Pounds & Kilograms) ............................................................................................... 5-4
Calibration Verification (U.S. Pounds) .......................................................................................................... 5-7
Increasing-Load Test (Phase 1) ............................................................................................................ 5-7

Product Reference Guide iii
Shift Test ................................................................................................................................................. 5-8
Increasing- Load Test (Phase 2) ........................................................................................................... 5-9
Blanking Test .......................................................................................................................................... 5-9
Decreasing-Load Test ......................................................................................................................... 5-10
Return to Zero Test ............................................................................................................................. 5-10
Calibration Verification (Kilograms) ........................................................................................................... 5-11
Increasing-Load Test (Phase 1) .......................................................................................................... 5-11
Shift Test (Metric) ................................................................................................................................ 5-12
Increasing- Load Test (Phase 2) ......................................................................................................... 5-13
Blanking Test ........................................................................................................................................ 5-13
Decreasing-Load Test ......................................................................................................................... 5-14
Return to Zero Test ............................................................................................................................. 5-14
Chapter 6. Programming............................................................................................................................................................ 6-1
Introduction to Label Programming ............................................................................................................ 6-1
Understanding the Basics ............................................................................................................................ 6-1
Integrating the Scanner With Your Host System ....................................................................................... 6-2
Customizing Your Scanner’s Operation ............................................................................................... 6-2
Programming Overview ................................................................................................................................ 6-4
Programming via Handheld Device ..................................................................................................... 6-4
What Is Programming Mode? ............................................................................................................... 6-5
Entering and Exiting Programming Mode. .........................................................................................6-5
Programming Session ........................................................................................................................... 6-6
LED and Beeper Indicators ......................................................................................................................... 6-10
If You Make a Mistake... .............................................................................................................................. 6-10
Return to Factory Settings ................................................................................................................. 6-10
Test Mode ............................................................................................................................................. 6-11
General Scanner Features .......................................................................................................................... 6-12
Scanner Button Options ..................................................................................................................... 6-12
Double Read Timeout .......................................................................................................................... 6-14
Laser Timeout ...................................................................................................................................... 6-16
Motor Timeout ..................................................................................................................................... 6-18
Label Gone Timeout ............................................................................................................................. 6-21
Auxiliary Port Mode ............................................................................................................................. 6-24
Auxiliary Port Baud Rate ..................................................................................................................... 6-26
Laser Failure Mode .............................................................................................................................. 6-30
Productivity Index Reporting (PIR)/Cashier Training (CT) ................................................................ 6-31
Indication Features ...................................................................................................................................... 6-32
Green LED Idle State ............................................................................................................................ 6-32
Power-up Beep Control ....................................................................................................................... 6-33
Good Read Beep Control ..................................................................................................................... 6-34
Good Read Beep Frequency ................................................................................................................ 6-35
Good Read Beep Length ...................................................................................................................... 6-37
Good Read Beep Volume ..................................................................................................................... 6-38
Good Read When to Indicate .............................................................................................................. 6-41
Scale Features .............................................................................................................................................. 6-43
Scale Enable ......................................................................................................................................... 6-43
Scale Enforced Zero Return ................................................................................................................ 6-44

iv MagellanTM 8300/8400
Scale Interface Type ............................................................................................................................. 6-47
Scale Calibration Notification ............................................................................................................. 6-49
Scale Intercharacter Delay .................................................................................................................. 6-50
Remote Display — Enable/Disable ................................................................................................... 6-51
EAS Features ................................................................................................................................................ 6-52
EAS Active State ................................................................................................................................... 6-52
EAS Timeout ......................................................................................................................................... 6-53
Interface Related Features ......................................................................................................................... 6-54
Interface Type ....................................................................................................................................... 6-54
Number of Host Transmission Buffers ............................................................................................. 6-76
AIM ID .................................................................................................................................................... 6-77
Label ID Control .................................................................................................................................... 6-79
Global Prefix ......................................................................................................................................... 6-82
Global Suffix .......................................................................................................................................... 6-84
Case Conversion ................................................................................................................................... 6-86
IBM Features ................................................................................................................................................ 6-88
IBM Interface Options ......................................................................................................................... 6-88
IBM Number of Host Resets ............................................................................................................... 6-89
IBM Scale Address ............................................................................................................................... 6-90
IBM Transmit Labels in Code 39 Format ........................................................................................... 6-92
IBM Label Slicing Control .................................................................................................................... 6-93
IBM Maximum Label Slice Length ..................................................................................................... 6-94
OEM USB Scanner Device Type .......................................................................................................... 6-95
RS-232 Features .......................................................................................................................................... 6-96
RS-232 Baud Rate ............................................................................................................................... 6-96
RS-232 Number of Data Bits ............................................................................................................ 6-100
RS-232 Number of Stop Bits ............................................................................................................ 6-101
RS-232 Parity ..................................................................................................................................... 6-102
RS-232 Hardware Control ................................................................................................................. 6-104
RS-232 Intercharacter Delay ............................................................................................................ 6-107
RS-232 Software Flow Control ......................................................................................................... 6-108
RS-232 Host Echo .............................................................................................................................. 6-109
RS-232 Host Echo Quiet Interval ..................................................................................................... 6-110
RS-232 Ignore Host Commands ...................................................................................................... 6-111
RS-232 TTL ......................................................................................................................................... 6-112
RS-232 TTL Invert .............................................................................................................................. 6-113
RS-232 ICL DC1 Character Delay Enable ......................................................................................... 6-114
RS-232 Team POS ICL Scale ............................................................................................................. 6-115
RS-232 Beep on ASCII BEL ................................................................................................................ 6-116
RS-232 Beep After Weigh ................................................................................................................. 6-117
RS-232 Beep on Not on File ............................................................................................................. 6-118
RS-232 ACK NAK Enable ................................................................................................................... 6-119
RS-232 ACK Character ....................................................................................................................... 6-121
RS-232 NAK Character ...................................................................................................................... 6-122
RS-232 Retry on ACK NAK Timeout ................................................................................................. 6-123
RS-232 ACK NAK Timeout Value ...................................................................................................... 6-124
RS-232 ACK NAK Retry Count .......................................................................................................... 6-125
RS-232 ACK NAK Error Handling ...................................................................................................... 6-126

Product Reference Guide v
RS-232 Indicate Transmission Failure ............................................................................................ 6-128
Single Cable RS-232 Options .................................................................................................................... 6-129
Single Cable RS-232 Scanner Only Protocol ................................................................................... 6-130
Single Cable RS-232 Stale Weight Timeout .................................................................................... 6-131
Single Cable RS-232 Scale — Transmit Weight Digits .................................................................. 6-133
Single Cable Manufacturer Extensions ...........................................................................................6-134
Single Cable Pacesetter Plus Enable ............................................................................................... 6-135
Single Cable RS-232 RTS CTS Selection ........................................................................................... 6-136
Single Cable RS-232 Use BCC ........................................................................................................... 6-139
Single Cable RS-232 Use ACK/NAK ................................................................................................. 6-140
Single Cable RS-232 Use STX ........................................................................................................... 6-141
Set Single Cable RS-232 STX Character ........................................................................................... 6-142
Set Single Cable RS-232 ETX Character ........................................................................................... 6-143
Keyboard Wedge/USB Keyboard Features ............................................................................................. 6-144
Keyboard Interface — Keyboard Layout ......................................................................................... 6-144
Keyboard Interface Quiet Interval .................................................................................................... 6-153
Keyboard Interface Caps Lock State ................................................................................................ 6-154
Keyboard Interface — Keyboard Simulation .................................................................................. 6-156
Keyboard Interface — Control Characters ...................................................................................... 6-157
Keyboard Interface — Intercharacter Delay ................................................................................... 6-159
Symbology Programming ......................................................................................................................... 6-160
Coupon Control .................................................................................................................................. 6-160
UPC-A Enable ............................................................................................................................................. 6-162
UPC-A Number System Character Transmission .......................................................................... 6-163
UPC-A Check Character Transmission ............................................................................................ 6-164
Expand UPC-A to EAN-13 ................................................................................................................. 6-165
UPC-A Label ID ................................................................................................................................... 6-166
UPC-A 2-Digit Supplemental Label ID ............................................................................................. 6-167
UPC-A 5-Digit Supplemental Label ID ............................................................................................. 6-168
UPC-A 128 Supplemental Label ID .................................................................................................. 6-169
UPC-A Minimum Reads .................................................................................................................... 6-170
UPC-E Enable ............................................................................................................................................. 6-172
UPC-E Number System Character Transmission ........................................................................... 6-173
UPC-E Check Character Transmission .............................................................................................6-174
Expand UPC-E to UPC-A ................................................................................................................... 6-175
Expand UPC-E to EAN-13 ................................................................................................................. 6-176
UPC-E Label ID ................................................................................................................................... 6-177
UPC-E 2-Digit Supplemental Label ID ............................................................................................. 6-178
UPC-E 5-Digit Supplemental Label ID ............................................................................................. 6-179
UPC-E 128 Supplemental Label ID ................................................................................................... 6-180
UPC-E Minimum Reads .................................................................................................................... 6-181
EAN-13 Enable ........................................................................................................................................... 6-183
EAN-13 First Character Transmission ............................................................................................6-184
EAN-13 Check Character Transmission .......................................................................................... 6-185
EAN-13 ISBN Conversion Enable ..................................................................................................... 6-186
EAN 13 Label ID .................................................................................................................................. 6-187
EAN-13 2-Digit Supplemental Label ID ...........................................................................................6-188
EAN-13 5-Digit Supplemental Label ID ...........................................................................................6-189

vi MagellanTM 8300/8400
EAN-13 128 Supplemental Label ID ................................................................................................ 6-190
EAN-13 Minimum Reads .................................................................................................................. 6-191
Bookland Label ID .............................................................................................................................. 6-193
EAN-8 Enable ............................................................................................................................................. 6-194
EAN-8 Check Character Transmission ............................................................................................ 6-195
Expand EAN-8 to EAN-13 ................................................................................................................. 6-196
EAN-8/JAN-8 Guard Insertion ......................................................................................................... 6-197
EAN-8/JAN-8 Guard Substitution ................................................................................................... 6-198
EAN-8/JAN-8 Both Guards Substitution ........................................................................................ 6-199
EAN-8 Stitch Exact Label Halves ..................................................................................................... 6-200
EAN-8 Stitch Unlike Label Halves .................................................................................................... 6-201
EAN 8 Label ID .................................................................................................................................... 6-202
EAN-8 2-Digit Supplemental Label ID ............................................................................................. 6-203
EAN-8 5-Digit Supplemental Label ID ............................................................................................. 6-204
EAN-8 128 Supplemental Label ID ................................................................................................... 6-205
EAN-8 Decoding Levels ..................................................................................................................... 6-206
EAN-8 Minimum Reads .................................................................................................................... 6-209
EAN-8 Minimum Segment Length .................................................................................................. 6-211
Other UPC/EAN Options ........................................................................................................................... 6-217
Price Weight Check ............................................................................................................................ 6-218
In-Store Label Minimum Reads ....................................................................................................... 6-221
Enable EAN Two Label ...................................................................................................................... 6-223
EAN Two Label Combined Transmission ........................................................................................ 6-224
UPC/EAN Guard Insertion ................................................................................................................. 6-225
UPC/EAN Stitch Exact Label Halves ................................................................................................ 6-226
UPC/EAN Stitch Unlike Label Halves ............................................................................................... 6-227
UPC/EAN Character Reconstruction ...............................................................................................6-228
EAN Two Label Minimum Reads ...................................................................................................... 6-229
UPC/EAN Correlation ........................................................................................................................ 6-231
UPC/EAN Minimum Segment Length ............................................................................................. 6-232
Addons ................................................................................................................................................ 6-238
Addon Timer ....................................................................................................................................... 6-242
2-Digit Add-ons Minimum Reads .................................................................................................... 6-243
5-Digit Add-ons Minimum Reads .................................................................................................... 6-245
Code 128 Add-ons Minimum Reads ................................................................................................ 6-247
GTIN Enable ................................................................................................................................................ 6-249
GTIN Label ID ...................................................................................................................................... 6-250
GTIN 2-Digit Supplemental Label ID ................................................................................................ 6-251
GTIN 5-Digit Supplemental Label ID ................................................................................................ 6-252
GTIN Code 128 Supplemental Label ID ............................................................................................6-253
DataBar Omnidirectional Enable .............................................................................................................. 6-254
DataBar Omnidirectional/EAN-128 Emulation .............................................................................. 6-255
DataBar Omnidirectional Label ID .................................................................................................... 6-256
DataBar Omnidirectional Minimum Reads ..................................................................................... 6-257
DataBar Expanded Enable ........................................................................................................................ 6-259
DataBar Expanded EAN-128 Emulation ......................................................................................... 6-260
DataBar Expanded Label ID .............................................................................................................. 6-261
DataBar Expanded Length Control .................................................................................................. 6-262

Product Reference Guide vii
DataBar Expanded Length 1 ............................................................................................................. 6-263
DataBar Expanded Length 2 ............................................................................................................. 6-264
DataBar Expanded Minimum Reads ............................................................................................... 6-265
Code 39 Enable ........................................................................................................................................... 6-267
Code 39 Start Stop Character Transmission ................................................................................... 6-268
Code 39 Check Character Calculation .............................................................................................. 6-269
Code 39 Check Character Transmission .......................................................................................... 6-270
Code 39 Full ASCII .............................................................................................................................. 6-271
Code 39 Label ID ................................................................................................................................. 6-272
Code 39 Require Quiet Zones ........................................................................................................... 6-273
Code 39 Length Control ..................................................................................................................... 6-274
Code 39 Length 1 ............................................................................................................................... 6-275
Code 39 Length 2 ............................................................................................................................... 6-276
Code 39 Correlation ........................................................................................................................... 6-277
Code 39 Stitching ............................................................................................................................... 6-278
Code 39 Minimum Reads .................................................................................................................. 6-279
Pharmacode 39 Enable ............................................................................................................................. 6-281
Pharmacode 39 Start Stop Character Transmission ..................................................................... 6-282
Pharmacode 39 Check Character Transmission ............................................................................. 6-283
Pharmacode 39 Label ID ................................................................................................................... 6-284
Code 128 Enable ......................................................................................................................................... 6-285
Code 128 Transmit Function Characters ......................................................................................... 6-286
Convert Code 128 to Code 39 ............................................................................................................ 6-287
Code 128 Label ID .............................................................................................................................. 6-288
Code 128 Length Control ................................................................................................................... 6-289
Code 128 Length 1 ............................................................................................................................. 6-290
Code 128 Length 2 ............................................................................................................................. 6-291
Code 128 Correlation ......................................................................................................................... 6-292
Code 128 Stitching ............................................................................................................................. 6-293
Code 128 Minimum Reads ................................................................................................................ 6-294
EAN-128 Enable ......................................................................................................................................... 6-296
EAN-128 Label ID ............................................................................................................................... 6-297
Interleaved 2 of 5 (I 2 of 5) Enable ............................................................................................................ 6-298
I 2 of 5 Check Character Calculation ................................................................................................. 6-299
I 2 of 5 Check Character Transmission ............................................................................................ 6-300
I 2 of 5 Label ID ................................................................................................................................... 6-301
I 2 of 5 Length Control ....................................................................................................................... 6-302
I 2 of 5 Length 1 ................................................................................................................................. 6-303
I 2 of 5 Length 2 ................................................................................................................................. 6-304
I 2 of 5 Correlation .............................................................................................................................. 6-305
I 2 of 5 Stitching ................................................................................................................................. 6-306
I 2 of 5 Minimum Reads .................................................................................................................... 6-307
Standard 2 of 5 (Std 2 of 5) Enable .......................................................................................................... 6-309
Standard 2 of 5 Check Character Calculation .................................................................................. 6-310
Standard 2 of 5 Check Character Transmission ............................................................................. 6-311
Standard 2 of 5 Label ID .................................................................................................................... 6-312
Standard 2 of 5 Length Control ........................................................................................................ 6-313
Standard 2 of 5 Length 1 .................................................................................................................. 6-314

viii MagellanTM 8300/8400
Standard 2 of 5 Length 2 .................................................................................................................. 6-315
Standard 2 of 5 Correlation ............................................................................................................... 6-316
Standard 2 of 5 Stitching .................................................................................................................. 6-317
Standard 2 of 5 Minimum Reads ..................................................................................................... 6-318
Codabar Enable .......................................................................................................................................... 6-320
Codabar Start Stop Character Transmission .................................................................................. 6-321
Codabar Start Stop Character Set .................................................................................................... 6-322
Codabar Start Stop Character Match ............................................................................................... 6-324
Codabar Check Character Calculation .............................................................................................. 6-325
Codabar Check Character Transmission .......................................................................................... 6-326
Codabar Label ID ................................................................................................................................ 6-327
Codabar Require Quiet Zones ........................................................................................................... 6-328
Codabar Length Control .................................................................................................................... 6-329
Codabar Length 1 ............................................................................................................................... 6-330
Codabar Length 2 ............................................................................................................................... 6-331
Codabar Correlation ........................................................................................................................... 6-332
Codabar Stitching ............................................................................................................................... 6-333
Codabar Minimum Reads ................................................................................................................. 6-334
Code 93 Enable ........................................................................................................................................... 6-336
Code 93 Label ID ................................................................................................................................. 6-337
Code 93 Length Control ..................................................................................................................... 6-338
Code 93 Length 1 ............................................................................................................................... 6-339
Code 93 Length 2 ............................................................................................................................... 6-340
Code 93 Correlation ........................................................................................................................... 6-341
Code 93 Stitching ............................................................................................................................... 6-342
Code 93 Minimum Reads .................................................................................................................. 6-343
MSI/Plessey Enable .................................................................................................................................. 6-345
MSI/Plessey Check Character Calculation ...................................................................................... 6-346
MSI/Plessey Number of Check Characters ..................................................................................... 6-347
MSI/Plessey Check Character Transmission .................................................................................. 6-348
MSI/Plessey Label ID ........................................................................................................................ 6-349
MSI/Plessey Length Control ............................................................................................................ 6-350
MSI/Plessey Length 1 ....................................................................................................................... 6-351
MSI/Plessey Length 2 ....................................................................................................................... 6-352
MSI/Plessey Correlation ................................................................................................................... 6-353
MSI/Plessey Stitching ....................................................................................................................... 6-354
MSI/Plessey Minimum Reads .......................................................................................................... 6-355
Appendix A. LED/Beeper Indications & Controls ............................................................................................... A-1
Controls and Indicators ................................................................................................................................. A-1
LED and Beeper Indications .................................................................................................................. A-2
Volume/Tone Push Button .................................................................................................................. A-3
Scale Zero Push Button ........................................................................................................................ A-5
Calibration Switch .................................................................................................................................. A-6
Appendix B. Cable Information ............................................................................................................................ B-1
Introduction .................................................................................................................................................... B-1
General Specifications ........................................................................................................................... B-1