Datalogic Magellan 9800i User manual

Magellan™ 9800i
USB Bridge
Quick Reference Guide

Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]
© 2015 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic"
or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own internal business
purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices,
contained in this documentation and shall ensure that all notices appear on any reproductions of
the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contact-
ing your Datalogic representative. Electronic versions may either be downloadable from the Data-
logic website (www.datalogic.com) or provided on appropriate media. If you visit our website and
would like to make comments or suggestions about this or other Datalogic publications, please let
us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time with-
out prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U. All other brand and product names may be trademarks of their
respective owners.
See the Regulatory Addendum included with
your product for additional regulatory,
safety and legal information.

Table of Contents
Magellan™ 9800i USB Bridge ..................................................................................... 1
Overview ......................................................................................................................1
Installation ...................................................................................................................2
Compatible Operating Systems and Software ........................................................2
Linux ....................................................................................................................2
- VLC (for Linux)......................................................................................... 2
- Gstreamer ............................................................................................... 3
- Cheese..................................................................................................... 3
Microsoft Windows® OS ....................................................................................4
- VLC (for Windows).................................................................................. 4
- WebcamViewer ...................................................................................... 8
Other Windows Resources ...............................................................................8
Troubleshooting ..........................................................................................................9
Warranty ....................................................................................................................10
Appendix .................................................................................................................... 15

NOTES

Quick Reference Guide 1
Magellan™ 9800i USB Bridge
Overview
The Magellan™ 9800i USB Bridge is an accessory that facilitates the streaming
of data from Magellan scanners to a host computer. The USB Bridge connects a
Magellan 9800i USB host port to a PC's USB port, allowing it to function as a
USB camera device.
USB
Host
Port

2 Magellan™ 9800i USB Bridge
Installation
Plug the cable from the Scanner USB host port to the USB Bridge.
Compatible Operating Systems and Software
To view data from the Scanner, you must have video viewing software installed
on your host system. The USB Bridge is compatible with the following operat-
ing systems and video application software.
Linux
Following are examples of tested compatible software for Linux using the v4l2
(Video for Linux 2) Driver. Tested on distributions: Ubuntu 12.04 and Fedora 16:
- VLC (for Linux)
VLC media player 2.0.8
* Example Invocation, Graphical:
1. Open VLC, Click the Play Button,
USB
Connect to Host/Terminal
Scanner Side
USB Host Port

Quick Reference Guide 3
2. Select the "Capture Device" Tab,
3. Ensure the Capture mode is set to: "Video for Linux 2",
4. Under Device Selection set the Video device name to your video device:
(/dev/video0 if Video Bridge is the only USB camera device connected),
5. Click the "Play" Button.
* Example Invocations, Command Line:
- Gstreamer
gst-launch-1.0, gstreamer-properties
* Example Invocation, Command Line:
- Cheese
Cheese Webcam Booth 3.4.1 (uses gstreamer)
%vlcv4l2:///dev/video0
%cvlcv4l2:///dev/video0#(nointerface)
%gst‐launchv4l2srcdevice=/dev/video0!xvimagesink

4 Magellan™ 9800i USB Bridge
Microsoft Windows® OS
If using Windows (Windows Vista/XP, Windows or Windows 8), Microsoft pro-
vides the USB Video Class (UVC) driver. It is an AVStream minidriver that pro-
vides driver support for USB Video Class devices. The device works
automatically with the system-supplied driver. Windows uses the (USB) Video
Class driver, Usbvideo.sys.
For Windows 7 or 8, you must download and install a video software program.
Many are available free, following are some recommended video software pro-
grams:
- VLC (for Windows)
VLC media player 2.2.1
1. Open VLC. Click the Play Button,

Quick Reference Guide 5
2. The Open Media dialog will open. Select "Capture Device",

6 Magellan™ 9800i USB Bridge
3. Ensure the Capture mode is set to: "DirectShow",
4. Under Device Selection set the Video device name to "UVC Camera",
5. Click "Play".

Quick Reference Guide 7
Figure 1. Microsoft's Device Manager showing USB Bridge

8 Magellan™ 9800i USB Bridge
Figure 2. Devices and Printers (in Windows 7 Control Panel) with
USB Bridge attached
- WebcamViewer
V1.0, Select "UVC Camera", Click the "Connect" Button
Other Windows Resources
Machine Learning and Computer Vision Libraries:
OpenCV.org
EmguCV
AForge.Net

Quick Reference Guide 9
Troubleshooting
If the USB Bridge is not operating properly, the following checks should be per-
formed:
1. If the scanner uses an external power supply and the external power
supply has failed, the scanner will not operate. Exchange the power
supply with a known good power supply and retest operation.
2. Verify the USB Bridge cable is securely attached to the host. Consult
your technical support personnel or refer to your host system manual
to verify the proper connection for the scanner.
3. Verify that the cable is securely attached to the scanner.
If the USB Bridge still does not function properly, contact your local supplier or
Datalogic Customer Support Services.

10 Magellan™ 9800i USB Bridge
Warranty
Datalogic warrants to Customer that this product will be free from defects in
materials and workmanship for a period of 3 years from product shipment.
Datalogic ADC Limited Factory Warranty
Warranty Coverage
Datalogic ADC (“Datalogic”) hardware products are warranted against defects
in material and workmanship under normal and proper use. The liability of
Datalogic under this warranty is limited to furnishing the labor and parts nec-
essary to remedy any defect covered by this warranty and restore the product
to its normal operating condition. Repair or replacement of product during the
warranty does not extend the original warranty term. Products are sold on the
basis of specifications applicable at the time of manufacture and Datalogic has
no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship,
Datalogic shall, at its sole option repair or replace the product without addi-
tional charge for parts and labor, or credit or refund the defective products duly
returned to Datalogic. To perform repairs, Datalogic may use new or recondi-
tioned parts, components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material and products.
Customer will allow Datalogic to scrap all parts removed from the repaired
product. The warranty period shall extend from the date of shipment from
Datalogic for the duration published by Datalogic for the product at the time of
purchase (Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired assembly for a
90 day period starting from the date of shipment of the repaired product from
Datalogic or until the expiration of the original warranty period, whichever is

Quick Reference Guide 11
longer. Datalogic does not guarantee, and it is not responsible for, the mainte-
nance of, damage to, or loss of configurations, data, and applications on the
repaired units and at its sole discretion can return the units in the “factory
default” configuration or with any software or firmware update available at the
time of the repair (other than the firmware or software installed during the
manufacture of the product). Customer accepts responsibility to maintain a
back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify
Datalogic of the claimed defect before the expiration of the applicable War-
ranty period and obtain from Datalogic a return authorization number (RMA)
for return of the product to a designated Datalogic service center. If Datalogic
determines Customer’s claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible
for packaging and shipping the product to the designated Datalogic service
center, with shipping charges prepaid. Datalogic shall pay for the return of the
product to Customer if the shipment is to a location within the country in
which the Datalogic service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products
returned to any other locations. Failure to follow the applicable RMA policy,
may result in a processing fee. Customer shall be responsible for return ship-
ment expenses for products which Datalogic, at its sole discretion, determines
are not defective or eligible for warranty repair.

12 Magellan™ 9800i USB Bridge
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or
upgraded by other than Datalogic service personnel or its authorized
representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was
caused by faulty operations, improper use, abuse, misuse, wear and
tear, negligence, improper storage or use of parts or accessories not
approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any
other instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper
maintenance, including but not limited to cleaning the upper window in
accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such as
but not limited to fire, water damage, floods, other natural disasters,
vandalism or abusive events that would cause internal and external
component damage or destruction of the whole unit, consumable
items;
(vi) any damage or malfunctioning caused by non-restoring action as for
example firmware or software upgrades, software or hardware recon-
figurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or
other degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries,
keypads, touch screen, triggers etc.).

Quick Reference Guide 13
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under
this warranty except to a purchaser or transferee of product. No attempted
assignment or transfer in violation of this provision shall be valid or binding
upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANT-
ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DAT-
ALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER
ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS
UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT
IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS.
UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR
ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUEN-
TIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF
WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic.
Datalogic shall assume risk of loss or damage for product in Datalogic’s pos-
session. In the absence of specific written instructions for the return of product
to Customer, Datalogic will select the carrier, but Datalogic shall not thereby
assume any liability in connection with the return shipment.

14 Magellan™ 9800i USB Bridge
NOTES

Quick Reference Guide 15
Appendix
Output of lsusb program for the USB Bridge device on Linux:
% sudo lsusb -v -
d05f9:0511
Bus 001 Device 063: ID 05f9:0511 PSC Scanning, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x05f9 PSC Scanning, Inc.
idProduct 0x0511
bcdDevice 3.14
iManufacturer 1 Datalogic ADC, Inc.
iProduct 2 Scanner Video Bridge
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 200

16 Magellan™ 9800i USB Bridge
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 Video
bmAttributes 0x80 (Bus Powered)
MaxPower 250mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 5 UVC Camera
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 5 UVC Camera
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 51
dwClockFrequency 48 .000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor: