Datalogic MEMOR 20 User manual

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
©2019 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be
reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or
for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation. Should future revisions of this manual
be published, you can acquire printed versions by contacting your Datalogic representative. Electronic
versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or suggestions about this or
other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and
accurate, however, Datalogic reserves the right to change any specification at any time without prior
notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may
be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google
LLC.
Patents
See www.patents.datalogic.com for patent list.
Reference Documentation
For further information regarding Memor 20 refer to the SDK Help on-line and to the Memor 20 User’s
Manual, downloadable from our website www.datalogic.com.
Support Through the Website
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com and click on the SUPPORT link which gives you access to:
Downloads by selecting your product model from the dropdown list in the Search by Product field for
specific Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable
etc.) from date of purchase at our company.
Rugged Mobile Computer
with 1D/2D Imager
Quick Start Guide
822003240 (Rev. A) Jan. 2019
See the Safety & Regulatory Addendum
included with your product for additional
regulatory, safety and legal information.
©2019 Datalogic S.p.A. and/or its
affiliates. All rights reserved. Datalogic
and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
www.datalogic.com
Out of the Box
The Memor 20 package contains:
 Memor 20 PDA
 Rechargeable one-piece battery pack
 USB Type-C cable
 Light Handstrap
 Quick Start Guide
 Safety & Regulatory Addendum
 End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their integrity and
compare them with all the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper packaging
is not covered under the warranty.
CAUTION
General View
Side View
Right Trigger Left Trigger
Power Button Volume Control
Buttons
Top View
Data Capture
Window
2nd Display
Touch Panel
Display
Charging/
Status LED
Good Read
Indicator
Front View
Front
Camera
Fingerprint
Rear Camera
LED Flash
Handstrap Light Eyelet
Battery
Swap
Latches and
LEDs
SIM 2 Card
Socket
SIM 1 Card
Socket
Back View
Bottom View
USB Rubber Door and USB
Type-C Port

Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot
of any of the docks.
Do not apply any sticker to the Memor 20 (see the examples below).
CAUTION
For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to
the Quick Start Guide included in the dock's box.
NOTE
The Memor 20 may get warm during charging. This is normal and does not mean a malfunction.
NOTE
SIM Card Installation
Memor 20 supports up to two nano SIM cards.
1. Turn off the Memor 20 or put it in swap battery mode (refer to the User’s Manual for more details).
2. Press the battery latches and remove the battery pack:
3. Pull the rubber label to remove the SIM door, then open the SIM card tray:
4. Place the nano SIM card in the tray with the written part upward and close the SIM tray.
5. Replace the SIM door and press it.
6. Replace the battery (see Battery Installation).
Scanning and Imaging
2D Imager Data Capture
To scan a bar code symbol:
1. Point the scan window at the bar code.
2. Press one of the scan triggers. The imager projects a laser aiming pattern similar to those used on
cameras. The aiming pattern is used to position the barcode or object within the field of view.
3. Center the symbol in any orientation within the aiming pattern. Ensure the entire symbol is within
the rectangular area formed by the brackets in the aiming pattern, then either wait for the timeout
or release the Scan Key to capture the image. A red beam illuminates the symbol, which is captured
and decoded.
If the scan has been successful:
 If enabled, the good read beep plays.
 If enabled, the GreenSpot projects a green spot onto the bar code image.
 If enabled, the good read indicator positioned at the top left side of the display glows solid green.
Linear Bar Code
2D Matrix Symbol
Relative Size and Location of Aiming System Pattern
Battery Installation
1. Insert the battery pack into the slot, bottom first, and press it into place until it clicks:
Charging Instructions
The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or
with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger).
During the charging process the charging LED positioned at the top left side of the display glows red
constantly. Once the charging process has been completed, the charging LED glows green constantly.
Charge with USB
Use the provided USB Type-C cable in conjunction with the power supply adapter to charge the device
from a power outlet.
The charger is modular, with one adapter and five switchover plugs.
You can also use the USB cable to charge the Memor 20 from any self-powered USB hub or USB port on
a computer.
Use only a Datalogic approved power supply to power the Memor 20.
CAUTION
Charge with the Dock
Insert the device into the dock with the screen facing front and the head facing up.
Use only a Datalogic approved power supply to power any of the docks.
CAUTION