Datalogic Memor X3 User manual

822001590 03/14
www.datalogic.com
© 2013-2014 Datalogic ADC S.r.l. All rights reserved.
Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. In many countries,
including the U.S.A. and the E.U.
Memor™ X3
Mobile Computer
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: [phone]
Fax: [phone]
Datalogic ADC S.r.l.
User’s Manual

Datalogic ADC, S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: [phone]
Fax: [phone]
©2013-2014 Datalogic ADC, S.r.l.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or
the procedures described therein may be reproduced or transmitted in any form or by any
means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the
purchaser's own internal business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation. Should future
revisions of this manual be published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable from the Datalogic
website (www.datalogic.com) or provided on appropriate media. If you visit our website and
would like to make comments or suggestions about this or other Datalogic publications,
please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification at
any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.
All other brand and product names may be trademarks of their respective owners.
Patents
This product may be covered by one or more of the following patents:
Design patents: AU310182, EP0469143, EP1582024, EP2247700, HK0601962.6, JP1325117,
KR30/0466667, TWD118829, USD574830, USD643034, USD658174, ZL200630124857.0
Utility patents: EP0681257B1, EP0789315B1, EP1128315B1, EP1396811B1, EP1413971B1,
IT1396943, US5992740, US6808114, US6997385, US7387246.

iii
CONTENTS
REFERENCES .............................................................................................V
Conventions.................................................................................................. v
Reference Documentation ............................................................................ v
Services and Support.................................................................................... v
GENERAL VIEW .........................................................................................VI
1INTRODUCTION ..........................................................................................1
1.1 Memor X3 Description...................................................................................1
1.2 Available Models...........................................................................................3
1.3 Package Contents.........................................................................................4
1.4 Inserting a MicroSD Card..............................................................................5
1.5 Removing the MicroSD Card ........................................................................8
1.6 Accessories...................................................................................................9
2BATTERIES AND MAINTENANCE ...........................................................10
2.1 Charging the Battery Pack..........................................................................10
2.2 Replacing the Battery Pack.........................................................................12
2.3 Cleaning the Mobile Computer....................................................................16
3CONNECTIONS .........................................................................................17
3.1 USB Connection .........................................................................................17
3.2 Connection to USB Peripherals ..................................................................19
3.3 RS232 Connection......................................................................................21
3.4 WLAN Connection ......................................................................................22
3.5 WPAN Connections ....................................................................................24
3.6 Connection Cables......................................................................................25
3.7 Wireless and Radio Frequencies Warnings................................................26
4USE AND FUNCTIONING..........................................................................28
4.1Startup ........................................................................................................28
4.1.1 Using the Stylus..........................................................................................30
4.2 Data Capture...............................................................................................31
4.2.1 Laser Data Capture.....................................................................................32
4.2.2 Imager Data Capture...................................................................................33
4.2.3 Linear Imager Data Capture........................................................................35
4.3 Description of the Keyboards......................................................................37
4.3.1 Resetting the Memor X3 .............................................................................40
4.4 Status Indicators.........................................................................................42
4.4.1 LED Status..................................................................................................42
4.4.2 Taskbar.......................................................................................................43
4.5 Control Panel..............................................................................................44
4.5.1 Data Capture Configuration ........................................................................45
4.5.2 Configure ....................................................................................................46

iv
4.5.3 Capture....................................................................................................... 48
4.5.4 DL Buttons.................................................................................................. 49
4.5.5 Registry.......................................................................................................55
4.5.6 Files Admin.................................................................................................56
4.5.7 Wireless Communications...........................................................................59
4.5.8 Stylus Calibration........................................................................................64
4.5.9 Audio Settings.............................................................................................67
4.6 Connecting to other Computers..................................................................69
4.6.1 Windows Mobile® Device Center................................................................69
4.6.2 Bluetooth® Manager Device Setup.............................................................70
4.6.3 FTP Server Setup.......................................................................................78
4.7 Backup Directory File Management............................................................79
4.8 Datalogic Firmware Utility ...........................................................................80
4.8.1 Retrieving a Firmware Image Update .........................................................80
4.8.2 Installing DFU on the Host PC....................................................................81
4.8.3 Updating the Firmware................................................................................82
4.9 Datalogic Configuration Utility.....................................................................83
4.10 Datalogic Desktop Utility.............................................................................84
4.10.1 Administrative Options (Admin tab).............................................................85
4.10.2 Locked Web Browser Options (LockedWeb tab) ........................................88
4.10.3 Status Icons Options (Status Tab)..............................................................93
4.10.4 Windows Controls.......................................................................................94
4.10.5 AppSelector Options (AppSelect tab)..........................................................96
4.11 AppSelector (Application Selector) .............................................................99
4.12 Locked Web Browser................................................................................100
4.12.1 Locked Web Browser Special Metatags ...................................................102
5TECHNICAL FEATURES.........................................................................106
5.1 Technical Data..........................................................................................106
5.2 Reading Diagrams....................................................................................111
6TEST CODES........................................................................................... 114
REGULATORY INFORMATION............................................................... 118
General Safety Rules................................................................................118
Power Supply............................................................................................118
Laser Safety..............................................................................................119
LED Class.................................................................................................125
Radio Compliance.....................................................................................125
FCC Compliance.......................................................................................130
Industry Canada Compliance....................................................................132
SAR Compliance.......................................................................................134
WEEE Compliance ...................................................................................135
GLOSSARY..............................................................................................137
INDEX.......................................................................................................141

v
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Memor X3 mobile computer.
“mobile computer” and "Memor X3" refer to Memor X3 mobile computer.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Memor X3 mobile
computer.
“Single Dock” refers to the Memor X3 Single Slot Dock.
The label artworks may be only a draft. Refer to the product labels for more precise
information.
REFERENCE DOCUMENTATION
For further information regarding Memor X3 refer to the SDK Help on-Line.
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Please check our website at www.datalogic.com under “Support & Services”, then
“Automatic Data Capture”, and click on the links indicated for further information
including:
- Downloads
- Manuals for the latest versions of user manuals and product guides.
- Software & Utilities for the latest firmware release for your product. You can
also click on the following link for direct access to this section:
www.datalogic.com/products_updates.
- Service Program for warranty extensions and maintenance agreements.
- Repair Centers for a list of authorised repair centers.
- Technical Support Automatic Data Capture email form to contact our
technical support.

1
vi
GENERAL VIEW
A)
QVGA 64K Color Display
*
B)
ON/OFF Power Key
C)
Speaker
D)
LEDs
E)
Scan Key
F)
Keyboard
G) Guitar Pick Stylus
H)
Microphone
I)
Laser Safety Label
J)
Rear Speaker
K)
Product Label (under battery)
L)
Battery Cover
M)
Side scan key (on both sides of
the mobile computer)
F
G
E
A
D
C
B
H
I
K
L
M
J

vii
N) Data Capture Window
*
O) DC Charger Connector P) Communication/Charger Connector
(through cradle)
Q) Micro USB Communication
Connector (through cable)
*Remove protective film cover before use
N
P
Q
O

1
viii

INTRODUCTION
1
1
1 INTRODUCTION
1.1 MEMOR X3 DESCRIPTION
Following the Datalogic Memor in the compact segment of Portable Data Terminals,
the Memor X3 mobile computer is Datalogic’s ultimate solution offering ease of use,
power and durability in a pocketable form factor.
The Memor X3 features a bigger and crisper display (2.4”) and longer-lasting
batteries (1430 and 2300 mAh) in a form factor that has the same shape (only 3mm
longer) and the same weight as its predecessor. In addition to the models with Laser
and with 2D Imager, its offer of scan engines now includes a CCD Linear Imager, so
as to address the needs of a wider range of customer applications.
The Memor X3 is built on the microprocessor XScale™ PXA310, working with a clock
speed of 806 MHz*. The RAM and Flash Memory have been increased to 256 Mb*
and 512 Mb in order to offer more space for running simultaneous applications, for
managing large databases, or for use with asynchronous/thick clients when off-line
autonomy is required. Moreover, the memory storage capacity can be further
increased through the user accessible Micro SD Card Slot.
The Memor X3 computer architecture is paired with Microsoft Windows CE 6.0
operating system, offered in 2 different versions: (1) Windows CE 6.0 Pro, bundled
with Microsoft WordPad and Internet Explorer; (2) Windows CE 6.0 Core, bundled in
a lighter package without browser and with a lighter set of features (e.g. no RDP, no
WordPad, no AYGShell).
The software development kit (SDK) for Memor X3 enables to create applications
under Windows CE (both Pro and Core) or under multi-platform environments such
as .NET.
The Memor X3 offers enhanced WiFi connectivity IEEE 802.11abgn, able to work in
both the bands 2.4GHz and 5.2GHz. Complemented by a CCX v4 security
certification from Cisco, the Datalogic Memor X3 provides infrastructure compatibility
focused on enterprise requirements for encrypted communication and seamless
roaming. In addition to that, the Bluetooth® Wireless Technology v2.1 with Enhanced
Data Rate (EDR) connects headsets, printers and other peripherals while eliminating
cumbersome wires and costly replacement of damaged cables.
Durability ratings protect the computing investment against accidental drops and
occasional exposure to liquids and dust. A Gorilla Glass 2 makes the scan window in
front of the laser engines resistant to accidental scratching and damage.
*except for models with CCD scan engine, featuring a 624 MHz clock speed and 128-Mb RAM

1MEMOR™ X3
2
1
The Wavelink® maintenance and management tools make the Datalogic Memor X3
a simple device to both deploy and maintain. Datalogic Firmware, Desktop and
Configuration Utilities, as well as a new Locked Web Browser complete the package
with unprecedented ability to customize device configuration to the different use
environments and processes.

INTRODUCTION
3
1
1.2 AVAILABLE MODELS
The Memor is available in different models depending on the options it is equipped
with. All options are listed below:
•communication options: WiFi IEEE 802.11abgn + Bluetooth®, Batch
•data capture options: laser, 2D imager, CCD linear imager
•operating system: Windows CE 6.0 Pro, Windows CE 6.0 Core
For further details about the Memor models refer to the web site:
http://www.datalogic.com.
For further information regarding Windows CE refer to the website:
http://www.microsoft.com/windowsembedded.
The currently available models are:
•944250001 Memor X3, Batch, 128 MB RAM/512 MB Flash, 624 MHz, 25-
key Numeric, Linear Imager with Green Spot, Windows CE Core 6.0
•944250002 Memor X3, 802.11 a/b/g/n CCX V4, Bluetooth®, 128 MB
RAM/512 MB Flash, 624 MHz, 25-key Numeric, Linear Imager with Green Spot,
Windows CE Core 6.0
•944250003 Memor X3, Batch, 256 MB RAM/512 MB Flash, 806 MHz, 25-
key Numeric, Laser with Green Spot, Windows CE Pro 6.0
•944250004 Memor X3, 802.11 a/b/g/n CCX V4, Bluetooth®, 256 MB
RAM/512 MB Flash, 806 MHz, 25-key Numeric, Laser with Green Spot,
Windows CE Pro 6.0
•944250005 Memor X3, 802.11 a/b/g/n CCX V4, Bluetooth®, 256 MB
RAM/512 MB Flash, 806 MHz, 25-key Numeric, 2D Imager with Green Spot,
Windows CE Pro 6.0

1MEMOR™ X3
4
1
1.3 PACKAGE CONTENTS
The Memor X3 package contains:
−1 Memor X3 mobile computer
−1 AC/DC power supply
−1 plug kit
−1 standard Micro USB cable
−1 hand strap with stylus holder (Windows CE Pro models only)
−1 extensible stylus (Windows CE Pro models only)
−1 guitar pick + cord
−1 Quick Start Guide
−1 Safety and Regulatory Addendum
−1 Wavelink Avalanche Insert
−1 End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their integrity and compare
them with the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
CAUTION
Rechargeable battery packs are not initially fully charged. Therefore
the first operation to perform is to charge them. See section 2.1.
NOTE

INTRODUCTION
5
1
1.4 INSERTING A MICROSD CARD
The Memor X3 supports microSD memory cards. To access the microSD card slot
and insert the card, proceed as follows:
1. Turn off the Memor X3.
2. Press the latch release button and pull the latch down; then remove the cover
and the battery pack:
3. Open the microSD card slot by lifting up the locking plate:

1MEMOR™ X3
6
1
4. Shift the cardholder upwards and then pull it up:
5. Insert the microSD card with the written part upward:
6. Lock the card into place by pushing the cardholder down and then shifting it
downwards; push the locking plate down:

INTRODUCTION
7
1
7. Reinsert the battery cover. First insert first the upper side and then press the
latch release button and pull the latch down to insert the bottom. Push the
knurled section of the latch upward to close the cover.

1MEMOR™ X3
8
1
1.5 REMOVING THE MICROSD CARD
To remove the microSD card, follow the steps above to access the SD area, and
remove it from its slot.
Follow proper ESD pr
ecautions to avoid damaging the
microprocessors in the Memor X3 or the microSD card itself.
Proper ESD precautions include, but are not limited to, working on
an ESD mat and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the microSD card slot for any other accessories.
CAUTION

INTRODUCTION
9
1
1.6 ACCESSORIES
Cradles
94A150058 DOCK, SINGLE SLOT, MEMORX3 w AUX. SLOT
94A150059 DOCK, ETHERNET SINGLE SLOT, MEMORX3
94A150060 CHARGER, 4 SLOT DOCK, MEMORX3
Batteries
94ACC0083 MEMOR X3 STANDARD BATTERY
94ACC0084 MEMOR X3 LARGE CAPACITY BATTER
Power Supply
94ACC1324 PG5-30P35 AC/DC POWER SUPPLY EU/USA PLUG
94ACC1334 PG5-30P35 AUS. PLUG ADAPTER
94ACC1335 PG5-30P35 UK PLUG ADAPTER
94ACC1339 PG5-30P35 EU. PLUG ADAPTER
Cables
94A051020 CAB-427 RS232 NULL MODEM CABLE
94A051022 WIN-NET Serial CAB (HRS ST40x-18S-CV)
94A051024 USB A (4 pin F) to Mini A (5 pin M)
94A051968 Cable, Micro USB, Client
94A051969 Cable, Micro USB, Host
Use only Datalogic approved power supply and cables. Use of an
alternative power supply will invalidate any approval given to this
device and may be dangerous.
NOTE

1MEMOR™ X3
10
2
2 BATTERIES AND MAINTENANCE
Rechargeable backup batteries and battery packs are not initially
fully charged. Therefore the initial operation to perform is to charge
them. See below.
NOTE
By default, the main battery pack is disconnected at the factory to
avoid damage due to excessive draining.
NOTE
Annual replacement of rechargeable battery pack avoids possible
risks or abnormalities and ensures maximum performance.
CAUTION
2.1 CHARGING THE BATTERY PACK
The battery pack autonomy varies according to many factors, such
as the frequency of barcode scanning, RF usage, battery life,
storage, environmental conditions, etc.
NOTE
The battery icon on the Taskbar indicates when the battery pack is low.
It is possible to recharge the battery pack by connecting the power supply directly to
the Memor X3.
Alternatively, it is also possible to recharge the battery pack by inserting the Memor
X3 into the single slot dock or into the four slot dock.
During the charging process the LED positioned at the right side of the display glows
red constantly. Once the charging process has been completed this LED glows green
constantly (see par. 4.4).
The stand alone battery pack may be recharged outside a Memor X3 using the spare
battery charging slot on the back of the single slot dock or the multi battery charger.

BATTERIES AND MAINTENANCE
11
2
Do not use the Memor X3 until batteries are charged for minimum 4
hours.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
CAUTION
Il y a risque d’explosion si la batterie est remplacée par une batterie
de type incorrect.
Mettre au rebut les batteris usagées confor mément aux instructions.
CAUTION
Avoid storing batteries for long periods in a state of full charge or very
low charge.
We recommend charging the battery pack every two to three months
to keep its charge at a moderate level to maximize battery life.
CAUTION
Even if the storage temperature range is wider, in order to achieve
the longest battery life, store the terminal and the spare batteries
between 20 to 30º C (68 to 86º F).
Memor X3 (including spare battery) should be charged at an ambient
temperature between 0° to +36 °C (+32° to +97 °F) to achieve the
maximum charging rate. Never charge the main device or spare
batteries in a closed space where excessive heat can build up.
NOTE
The battery level may display incorrectly for several minutes after the
Memor X3 is disconnected from its charger if the charging cycle is
not completed.
NOTE
The Memor X3 may get warm during charging; this is normal and
does not mean a malfunction.
NOTE

1MEMOR™ X3
12
2
2.2 REPLACING THE BATTERY PACK
To correctly replace the battery pack, proceed as follows.
1. Turn off the Memor X3 .
2. Press the latch release button and pull the latch down; then remove the battery
cover:
3. Install the new battery pack, first insert the upper side (contacts), then the
bottom side of the battery pack into the slot: