Datalogic 94ACC0175 User manual

INSTRUCTIONS
©2017 Datalogic S.p.A. and/or its affiliat s. All rights r s rv d.
Datalogic
and th Datalogic logo ar r gist r d trad marks of Datalogic
S.p.A. in
many countri s, including th U.S. and th E.U. Rhino is a
trad mark of Datalogic S.p.A. and/or its
affiliat s. All oth r brand and
product nam s may b trad marks of th ir r sp ctiv own rs.
www.datalogic.com
94ACC0175 Quick Change V-Mount
General Features
With th Quick Chang V-Mount it is possibl to asily r mov or install th VMC on VESA or RAM
mounts without th usag of any tools.
Pl as not that th Quick Chang V-Mount is not compatibl with 94ACC0164 UPS Batt ry Backup
with Sp ak r.
Th pack contains th following compon nts
1.
1x
bas plat
2. 1x ram or v sa plat
3. 8x M6x16 scr ws all n k y
4. 3x M5x12 scr ws all n k y
5. 8x spring wash rs M6
6. 8x wash rs D6.4
7.
3
x
M8x16 count r sunk scr ws
8. 3x spring wash rs M5
9. 3x wash rs D5.3
10. All n tool 4 & 5
Assembling Quick Change V-Mount on the VMC
Th quick mount bas plat (2) is install d on th backsid of th VMC (1). To fast n th bas plat
us 4 M6x16 (3) scr ws. On ach scr w install a spring wash r (4) and a wash r (5). Torqu ach of
th 4 scr ws with 10 Nm.
6
1
3
5

INSTRUCTIONS
822002470
Assembling Quick Change V-Mount an the RAM VESA -D
To ass mbl th
RAM 75mm X
75mm VESA
3.625" Plat with D Siz 2.25" Ball us 4
M6x16 scr ws all n k y (3). B tw n ach
scr w and th RAM plat install a spring
wash r (5) and a wash r (6). To Fix th
scr ws us th all n tool 4. Torqu ach of
th 4 scr ws with 10 Nm.
Assembling Quick Change V-Mount an the RAM Roun -C
To ass mbl th
RAM 2.5" Round Plat with
AMPs Hol Patt rn & C Siz 1.5" Ball us 3
M5x12 scr ws all n k y (4). B tw n ach
scr w and th RAM plat install a spring
wash r (8) and a wash r (9). To Fix th scr ws
us th all n tool 4. Torqu ach of th 3
scr ws with 6 Nm.
Assembling Quick Change V-Mount an the RAM Roun -D
To ass mbl th
RAM 3.68" Diam t r Round
Plat with D Siz 2.25" Ball to th RAM or
VESA plat (2) us 3 M8x16 count r sunk
scr ws (7) and fix th m with th h lp of th
all n tool 5. Torqu ach of th 3 scr ws with
25 Nm.
2
3
5
6
2
4
8
9
2
7