Dawnco DIVINSUP-2-1X5A User manual


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
You are entitled to the manufacturer’s limited express warranty, if any, that accompanies the product. DAWNco makes no
additional or independent warranty. All other warranties, express or implied, including the warranties of merchantablility and
fitness for a particular purpose are disclaimed. We do our best to be accurate. We are not responsible for any typographical,
photographic or technical errors. See “Policies for DAWNco” under the “Answers” button at the button at the DAWNco website.
Installation and Operation
Manual
Power-Conditioned Distribution System for
satellite L band signals


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
Product Inspection
Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a
claim with the carrier.
Important Safety Instructions
To insure proper installation and operation, take a moment to read this guide before proceeding with
the installation. If you have any questions or comments about the DIVINSUP-2-1X5A satellite
power conditioned distribution system, please contact DAWNco at phone number 248-391-9200.
Safeguards


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
Safeguards


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
Descriptions
Distribution system compactly
combines LNB powering, signal
separation, and amplification in a
single rack space
Fully-conditioned power source
eliminates power drawn from
receiver, reducing heat buildup and
increasing product life
Dual independent 1000mA high-
capacity supplies have ample
power reserve to reliably feed
multiple line amplifiers
5 amplified outputs per
polarity provide for multiple
receiver flexibility
Single polarity configuration pro-
vides 9 outputs for maximum
receiver operation
Front panel LED’s provide quick and
easy LNB open-or-short status
monitoring
Automatic current sensing enables
short circuit shutdown protection to
safeguard from potential dam-age
while servicing LNBs
Plug-in external UL approved power
adapter supplied for ease of
installation and to reduce heat
build-up within the unit
DIVINSUP-2-1X5A
Satellite Power-Conditioned Distribution System
DAWNco’s Divinsup is an L-band satellite power-conditioned distribution
system, compactly combining multiple functions into a single rack unit. The unit
powers two satellite LNB polarities in the 950-2150 MHz range, amplifies and
splits the signals for distribution to multiple satellite receivers. Two high capacity
1000mA power supplies provide enough power for each LNB polarity and several
line amplifiers, reducing wear-and-tear on commercial receivers. Front panel
current-sensing indicators warn of system faults and allow quick system status.


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
DIVINSUP-2-1X5A


DIVINSUP-2-1X5A Manual
Reasonable prices, priceless reasoning.
3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph [phone] • Fax [phone] • [e-mail]
Installation
It is recommended that assistance be available to safely install equipment in
equipment racks.
1.Install chassis in equipment rack (equipment rack sold separately) by supporting the bottom and rear of DIVINSUP-2-1X5Aat the desired elevation in rack.
2.Line up the side holes of chassis with the tapped equipment rack holes.
3.Insert the provided screws through the mounting holes at the extreme left and right of faceplate and thread into the tapped equipment rack holes.
4. Fasten the bottom screws first, then fasten top screws.(tighten securely).
5.Connect a cable from the satellite vertical polarity low noise block converter (LNB) to the vertical input connector of the DIVINSUP-2-1X5A.
6.Connect a cable from the satellite horizontal polarity low noise block converter (LNB) to the horizontal input connector of the DIVINSUP-2-1X5A.
7.Connect a cable from the output connector the DIVINSUP-2-1X5Ato the input of a satellite receiver
8.Plug the wall adaptor plug into the jack located in the back of the unit.
9.Plug the adaptor into a 120Vac, 60Hz wall receptacle.