DAXOM UKDAX-80Y10BT User manual

1

2
To Daxom User
In order to perform device’s function properly and for your safety follow the
instructions mentioned in the user manual of the device during the mounting and the
usage of the device. In case of an unauthorized mounting and maintenance, the
device will be void from warranty cover. In addition to that, our company will not be
responsible from failure or an accident that may occur in the device. Please keep this
user manual in good conditions for future reference.
Device installation must be made by authorized personnel according to
instructions that are determined inside this manual.
Start-up of device must be made by Authorized Service. Do not try to operate the
device by yourself.
Connection of water and heating installment ofthe device must be made as safety.
Device can operate with the voltage determined inside this manual according to
its model. Suitable system voltage must be provided.
When it is supplied electric distribution from any electric resource (like generator)
except city electrical distribution network, must be sure that necessary conditions
are provided for safety operation of the device.
Energy must be provided to device with suitable cable section determined inside
this manual. Residual Current Device and grounding must definitely place.
Installation of the device must not be made to humidity places and places that can
be wet from external factors.
Do not keep inflammable, explosive or easy flammable materials or objects near
or close the device.
This “INSTALLATION AND USER MANNUAL” is supplemental part of the product.
Please keep it for apply when it is necessary. Contact with authorized service
agency for the new copy in case of lost or damage.
This device must only be used as suitable as for its purpose. Producer reject all
kinds of liabilities that places or not places in the agreement for damage property
or injury indented to person and animals which cause because of consumer wrong
using, installation, setting and maintenance.
1. SAFETY WARNINGS

3
After you unpack the device, be sure that content is in good position and complete
otherwise contact with the sales agency that you have purchased the device.
Safety valve outlet must be connected to suitable discharge system. All
responsibilities are belong to user in case of any damage that occurs because of
any intervention to safety valve.
Remove all packing wastes carefully without giving damage to human and
environment health.
In case of water leakage happens, water feed must be close and authorized
service agency must be immediately informed.
Hydraulic system operation pressure must be between 1 and 2 bars therefore it
must not exceed 3 bars. In case of need reduce water pressure of heater circuit
from discharge valve of installment.
If the device will not have used for a long time, perform following points are
suggested.
Bring switch of the device OFF position.
Close taps both heating and hot water network.
Discharge heating installation and boiler cycle for preventing freezing.
Device should not be used by children, people with insufficient physical, sensory
or mental capabilities or people who are lack experience and knowledge about the
usage of the device.
In case of having smoked or burning smell originating from device, make switch of
the device”OFF” position and contact with authorized service agency.
Do not touch the device with wet hand or when outside of device is wet.
Do not use substances such as detergent and thinner for the cleaning of the
device. Clean outside of the device with damp –dry fabric after make switch of
device OFF.
Absolutely control temperature of hot water before using.
The lifetime of the device which is determined by Ministry of Custom and trade is
10 years

4
Adjust ambient temperature according to your need. Increasing 1 degree of
ambient temperature increases your energy consumption about %6.
Having homogeneous heating at parts according to intended use that is placed at
the heating place, increases saving.
By using thermostatic valve for radiators, having adjustable required temperature
value for every section increases saving but using room thermosatd and
thermoatatic valve at the same time can cause problem
For sensing thermostatic valves ambient temperature correctly, curtains or objects
that affect air flow must be positioned properly.
For sensing room thermostad ambient temperature correctly that it placed, it
should be positioned far and proper height from window, object or heat source.
Ventilation of heated environment very long time increase the energy lost. Short
time ventilation must be made. If it is needed tomake long time ventilation, closing
valve of ambient radiator or turn the device down provide energy saving.
At night time or when you are not at home for a short time, if device temperature
is decreased, can be saved while providing keep the temperature at sufficient
level.
Adjustment of device operation temperature setting according to exterior
temperature provides saving.
Setting temperature of tap water according to your need without making lukewarm
providesn saving.
Use water as consciously. Consciously using water increase saving.
2. SUGGESTIONS FOR ECONOMICALLY USED

5
Wall Type products code explanations are as in the following.
Ground type boiler product codes explanations are as in the following
Products codes explanations of boiler without pump are as in the following.
3. DEVICE CONFIGURATION

6
3.1. Wall Type Boiler With Tank

7

8
3.2. Floor Type Boiler With Tank
3.2.1. Floor Type 80 Liter Boiler With Tank

9

10
3.2.2. Floor Type 120 Liter Boiler With Tank

11

12
3.3. Wall Type Electric Boiler With External Tank

13

14
Technical Specifications
Model
Power (kW)
Boiler
Capacity (l)
Weight Without
Water (Kg)
Dimensions
H*W*D (mm)
3~400 V 50 Hz Wall Type Electric Boiler With Tank
UKDAX-10EBT
10
50
50
770*560*390
UKDAX-12EBT
12
50
50
770*560*390
UKDAX-16EBT
16
50
52
770*560*390
UKDAX-18EBT
18
50
52
770*560*390
UKDAX-20EBT
20
50
52
770*560*390
UKDAX-24EBT
24
50
52
770*560*390
1~220 V 50 Hz Wall Type Electric Boiler With Tank
UKDAX-6EDM
6
50
50
770*560*390
UKDAX-10EDM
10
50
50
770*560*390
UKDAX-12EDM
12
50
52
770*560*390
UKDAX-16EDM
16
50
52
770*560*390
UKDAX-18EDM
18
50
52
770*560*390
Technical Specifications
Heating
DHW
Min. Operation Pressure
bar
1
0,5
Max. Operation Pressure
bar
3
8
Expansion Tank
l
7
2
Min. Setting Temperature
oC
10
35
Max. Setting Temperature
oC
80
65
Connections
inch
¾
½
4. TECHNICAL INFORMATIONS
4.1. Wall Type Boiler With Tank

15
Technical Specifications
Model
Power
(kW)
Boiler
Capacity (l)
Weight Without
Water (Kg)
Dimensions
H*W*D (mm)
3~400 V 50 Hz Electric Boiler With Tank
UKDAX-80Y10BT
10
80
55
836*600*590
UKDAX-80Y12BT
12
80
55
836*600*590
UKDAX-80Y16BT
16
80
55
836*600*590
UKDAX-80Y18BT
18
80
55
836*600*590
UKDAX-80Y20BT
20
80
55
836*600*590
UKDAX-80Y24BT
24
80
55
836*600*590
UKDAX-120Y10BT
10
120
65
1152*600*590
UKDAX-120Y12BT
12
120
65
1152*600*590
UKDAX-120Y16BT
16
120
65
1152*600*590
UKDAX-120Y18BT
18
120
65
1152*600*590
UKDAX-120Y20BT
20
120
65
1152*600*590
UKDAX-120Y24BT
24
120
65
1152*600*590
1~220 V 50 Hz Electric Boiler With Tank
UKDAX-80Y10BM
10
80
55
836*600*590
UKDAX-80Y12BM
12
80
55
836*600*590
UKDAX-80Y16BM
16
80
55
836*600*590
UKDAX-80Y18BM
18
80
55
836*600*590
UKDAX-120Y10BM
10
120
65
1152*600*590
UKDAX-120Y12BM
12
120
65
1152*600*590
UKDAX-120Y16BM
16
120
65
1152*600*590
UKDAX-120Y18BM
18
120
65
1152*600*590
Technical Specifications
Heating
DHW
Min. Operation Pressure
bar
1
0,5
Max. Operation Pressure
bar
3
8
Expansion Tank
l
7
2
Min. Setting Temperature
oC
10
35
Max. Setting Temperature
oC
80
65
Connections
inch
¾
½
4.2. Floor Type Boiler With Tank

16
Technical Specifications
Model
Power
(kW)
Expansion
Tank (l)
Weight Without
Water (Kg)
Dimensions
H*W*D (mm)
3~400 V 50 Hz Electric Boiler With Tank
UKDAX-10HBT
10
7
23,5
700*400*220
UKDAX-12HBT
12
7
23,5
700*400*220
UKDAX-16HBT
16
7
25
700*400*220
UKDAX-18HBT
18
7
25
700*400*220
UKDAX-20HBT
20
7
25
700*400*220
UKDAX-24HBT
24
7
25
700*400*220
UKDAX-30HBT
30
12
32,2
700*450*320
UKDAX-36HBT
36
12
35,4
700*450*320
UKDAX-40HBT
40
12
35,4
700*450*320
UKDAX-48HBT
48
12
35,4
700*450*320
1~220 V 50 Hz Electric Boiler With Tank
UKDAX-6HBM
6
7
23,5
700*400*220
UKDAX-10HBM
10
7
23,5
700*400*220
UKDAX-12HBM
12
7
23,5
700*400*220
UKDAX-16HBM
16
7
25
700*400*220
UKDAX-18HBM
18
7
25
700*400*220
Technical Specifications
Min. Operation Pressure
bar
1
Max. Operation Pressure
bar
3
Radiator Operation Setting Temperature
°C
10-80
Boiler Operation Setting Temperature
°C
35-65
Heating Connections
İnch
¾
DHW Connections
İnch
¾
Water Filling Connection
İnch
½
4.3. Wall Type Electric Boiler With External Tank

17
Device installation must be done by authorised personnel.
Obey minimum distance that is anticipated for installation in order to reach the device
for making maintenance and repair.
For Correct Device Installation;
Installation must not be made on the cooker or similar cooking devices.
Do not leave combustion products inside device installed room.
Heating sensitive walls (for example wooden walls) must be protected with steady
insulation.
Before the installation, all system pipes must be washed carefully for removing
any residual things that can give damage to operation of the device.
When heating system increases over 3 bar, water disposal starts from safety
valve.
When boiler pressure increases over 8 bar, drainage starts from safety valve. (For
Ukdax-xxEBM and Ukdax-xxEBT )Boiler max operating pressure is 6 bar. If you
suspect that system pressure is over 6 bar, install pressure reducer to inlet of
device or flat entrence.
5. DEVICE INSTALLATION
5.1. Installation Conditions and Safety Warnings

18
Device installation place must be far way from blockers, obstruction parts and
bulges during repairing and maintenance. There must be sufficient space around
the device for maintenance and repair.
Electric connection of the device must be made with suitable cable, fuse and
residual current device and grounding absolutely must be made.
Installation wall of the device must be as durable as carrying the weight of the
device.
Installation wall of the device must be as durable as carrying the weight of the
device.
For device installation in the place chosen in accordance with the conditions stated
above;
Mark the place of device installation holes on the installed surface
Drill up and bottom installation holes with 8 mm drilling bit.
Place M8 open hook steel dowelto to upper installation hole and tighten the nut
until fixing plug tighten. The open side of hook must be up.
Install the 8 mm fixing plug to bottom part installation holes.
After control durability of hook, hold the device by two people opposite to each
other, place it on the hanger upper plate fixed to the wall. Do not leave the device
without being sure that it is fully fixed.
Fix tightly from bottom installation holes with 5*45mm Chipboard Screws.
After complete the wall installation of device, control the installation durability of
device.
For Ukdax-xxHBT ve Ukdax-xxHBM models, 50 K NTC boiler sensor must be
installed.
5.2. Wall Type Device Installation

19

20
Installation wall of the device must be as durable as carrying the full weight of the
device.
Before the plumbing connections are made, it must be completely balanced and the
space in the mounting feet must be taken.
5.3. Floor Type Device Installation