DaytonAudio AERO User manual

Contents
1. Safety.....................................................................................................................3
2. Wi-Fi Multi-Room Audio System ......................................................................3-5
2.1 Product Introduction .........................................................................................3
2.2 Speaker Controls...........................................................................................4-5
3. Setup......................................................................................................................6
3.1 Getting Started .................................................................................................6
3.2 Hi-Fly App.........................................................................................................6
3.3 Powering On Your Speaker ..............................................................................6
4. Connecting to Your Home Wi-Fi Network........................................................6-9
4.1 Setup .............................................................................................................6-9
4.2 Presets .............................................................................................................9
5. Bluetooth Mode ..................................................................................................10
6. Product Specications.......................................................................................10
7. Troubleshooting ................................................................................................. 11
7.1 No Power........................................................................................................ 11
7.2 No Audio......................................................................................................... 11
7.3 No Response.................................................................................................. 11
7.4 How Can I Reset the Wi-Fi Settings?............................................................. 11
7.5 Music Streaming Drop Outs ........................................................................... 11
(2)

1. Safety
Only use accessories specied by the manufacturer.
• Only power supply included with this product.
• The product shall not be exposed to moisture or splashing.
• Do not place anything on top of the product.
Never install this product in a conned space. Always leave a space of at least four inches around this
product for ventilation. Ensure curtains or other objects never cover the ventilation slots on this product.
2. Wi-Fi Multi-Room Audio System
2.1 Product Introduction
The Dayton AERO speaker makes it possible to play your music library and stream music providers like
Spotify, iHeart Radio, and Tidal. You can also access music on a DLNA NAS device through the Hi-Fly
app. You can stream music to any room or all rooms. Bluetooth is ideal for playing music directly from
your mobile device.
Product Features
• Wi-Fi audio multi-room streaming with coverage range of 30M
• Supports DLNA and Airplay Protocols
• Bluetooth 4.0 Class II with operation distance range within 10M
• 3.5mm Aux input
• Operation Voltage: 100-240V 50~60 Hz, DC 12V 2A
• Audio power: 10W x 2 (@ 4ohm loaded)
Product Packing List
• AERO Speaker
• Power Adapter
• IR Remote
• Instruction Manual
• Hi-Fly App Guide
Warning
• Never remove the casing of this product.
• Never lubricate any part of this product.
• Never place this product on other electrical equipment.
• Keep this product away from direct sunlight, ames, or heat.
• Disconnect this product from power when not in use.
(3

2.2 Speaker Controls
①SOURCE:
Press the source button once to change the source selection. Press and hold the source button to
pair while in Bluetooth source mode or for reset function while in the Wi-Fi source mode.
• Dark Blue: Wi-Fi (Press and hold to reset Wi-Fi settings)
• Light Blue: Bluetooth (Press and hold for pairing function)
• Green: 3.5mm Aux Line Input
②VOLUME DOWN:
Press once or hold to decrease the speaker output level.
③VOLUME UP:
Press once or hold to increase the speaker output level.
④MUTE:
Press once to mute the speaker, when mute function is active
it will turn RED, press again to return to play function.
*Press and hold the mute button while in Wi-Fi source mode to access
WPS function during Wi-Fi network setup.
⑤Power ON/OFF Switch:
Slide this button to turn ON and OFF the speaker.
⑥Audio Input (3.5mm)
⑦Power Input (DC power input)
TOP PANEL SIDE PANEL
(4)

IR Remote Control
Speaker ON/OFF
Mute
Play/Pause
Next/Forward
Previous/Back
Volume Up
Volume Down
Bluetooth
Aux In
Wi-Fi
Preset buttons 1-6 (Wi-Fi Mode)
Save stations or play lists as presets.
Use the remote to access saved presets.
(5)

3. Setup
3.1 Getting Started
To stream music wirelessly through Wi-Fi:
• You will need a 2.4GHz Wi-Fi router and internet access
• An iOS or Android device connected to your network
3.2 Hi-Fly App
Locate and Install the Hi-Fly app on your iOS or Android device
3.3 Powering On Your Speaker
Connect the power adaptor to the side of the speaker. Move the power switch to the ON position.
4. Connecting to Your Home Wi-Fi Network
To connect speaker to your home Wi-Fi network, you will need to apply your home Wi-Fi settings
to the AERO speaker using the Hi-Fly app.
4.1 Setup
Before connecting to your home Wi-Fi network, make sure that:
• Your Wi-Fi router is powered on and working properly.
• The speaker is powered on and in the Wi-Fi (dark blue) source mode.
• Your mobile device is connected to your Wi-Fi network.
• The Hi-Fly app is installed on your mobile device.
1. Launch the Hi-Fly app, it will rst search for connected devices on your network. Tap the
“Wi-Fi Setup Wizard” to get started. Enter your home Wi-Fi network password in the
“WI-FI INFO” screen and then tap next.
(6)

2. Press and hold (3-5 seconds) the MUTE button until the source indicator starts to blink for
WPS mode. You will hear a voice prompt “searching for Wi-Fi connection” then tap next.
3. If the speaker is able to connect you will hear a voice prompt “Wi-Fi connected”. Tap next to
name the new device.
(7)

4. After naming your speaker, select your device then select your choice of from the music menu.
5. If you hear the voice prompt “Setup failed” you may have entered the wrong password and you
can try again, otherwise choose the alternate way to set up and follow the onscreen menu.
(8)

4.2 Presets
Find and tap the speaker icon in your favorite playlist or internet radio station. Use the
Hi-Fly app to save presets. Access the presets via Hi-Fly or IR remote once they have
been saved in the device.
(9)

5. Bluetooth Mode
1. Touch source to select Bluetooth Mode (light blue).
2. Press and hold source until source starts to blink and ready to pair.
3. Search for AERO in the Bluetooth settings.
4. Pairing is complete when the source light remains a solid color.
6. Product Specications
Sources: Wi-Fi, Bluetooth and 3.5mm AUX Line in
Wi-Fi parameter
Wi-Fi standard: 802.11b/g/n 2T2R
Wi-Fi Frequency range: 2.412 GHz~ 2.484 GHz
Security format: WEP/WAP-PSK/WPA2-PSK/WAPI
Security type: WEP64/WEP128/TKIP/AES
Streaming protocol: DLNA, UPNP, AIRPLAY
Sampling rate: 16 kHz~192 kHz 24bits
Supported devices: iOS and Android
Bluetooth
Bluetooth Standard: Bluetooth 4.0 Class II
Bluetooth Frequency range: 2.4~2.48 GHz ISM Band
Bluetooth proles: A2DP, AVRCP
RF power: 8dBm
Operation range: 10M
Audio Performance
Power output: 10W RMS x 2, 1 bass radiator
SNR: >80 dB
THD: <1%
Input sensitivity: 600 mV
Frequency response: 60 Hz ~ 18 kHz +/-3 dB
Sound pressure: 82 dB/M
Speaker driver: 3” x 2
Speaker impedance: 4 ohms
Storage temperature: From -4°F to 158°F
Working temperature: From 32°F to 104°F
Languages: English, German, Simplied Chinese, Spanish
Gross weight: 2.5kg
Package dimensions: 167 mm W x 336 mm L x 198 mm H
Power Adaptor: AC 100-240V, 50-60Hz, 12V/2A output
(10)