DC Power Solutions B-COOL12000Flex5H User manual

www.dcpowersales.com
Installation Manual
SPLIT
SPLIT UNITS UNITS

Installation must be performed by
a professional
Switch off / disconnect battery
before installation
Unit is heavy. Do not handle or
install the unit alone.
Wear goggles and gloves for the installation
Do not remove any protection
provided on the unit.
SAFETY INSTRUCTION

each box contains
Power Harness
(12v)
Power Harness
(24v)
Remote Controller
Air Conditioner
Air Conditioner
Install Screws
3 points hose
injection molding
connection line
Backpack high
pressure pipe
5 points hose
Compressor Shock Pad

Recommended
Recommended
Recommended
Hole Cut Sizes
Hole Cut Sizes
Hole Cut Sizes
B-COOL12000Flex5H
B-COOL12000WMB
50 mm x 50 mm
50 mm x 50 mm
1.97 in x 1.97 in
1.97 in x 1.97 in

Remove the Outer Casing
Fix the damping pad and sleeve at the marked points on the
external machine.
STEP 1.

Before Punching a Hole
Mark the punch position (before making a hole)
(select 5 installation points)
STEP 2.

Punching a Hole for Installation
Punch a Hole using a drill ( 8 mm drill).
Use a pull riveter to fix the pull rivet nut at the marked hole.
STEP 3.

Fixing the Damping Pads
Fix the damping pad and sleeve at the marked points on the
external machine.
STEP 4.

Install the External Unit
Install the External Unit
STEP 5.

Install the Expansion Valve
Connecting the Expansion Valve
STEP 6.

Install the Internal Machine
Mounting Plate & Evaporator
Install the Internal Machine Mounting Plate.
Install the Evaporator
1.
2.
STEP 7.

Connecting the Compressor
Connect the 5/8 inch low pressure pipe to the compressor
STEP 8.

Wiring the Internal Unit
Connect the internal and external machine wire and power cord
STEP 9.

Connecting the Evaporator
Connect Internal and External Pipe to the Evaporator
Install the drainage pipe
STEP 10.

Vacuuming the System
Vacuum for 35 - 40 mins
STEP 11.

Refill Refrigerant
Refill Refrigerant (Pure R134a) 600g
STEP 12.

Battery Connection
Connect the power cord to the battery.
STEP 13.

Attach the Outer Casing
This Finishes the Installation.
STEP 14.

FLIP OVER FOR
"OPERATING INSTRUCTIONS"
STEP 15.
Switch on the A/C