Deantron iNod Series User manual

Wall Smart Socket
INSTRUCTION

Deantron Wall Smart Socket is of 86 type, which has function
of Remote Control, Timer/Delay, Power Monitoring, Auto
Power-off, Charge Protection, Light Halo, IR Remote etc. In
APP interface modules, there is socket set, power statistics,
power management and linkage-control all other smart
products through data cloud service.
Products Character
Convenient Operation: Screen-touch Control
Remote Monitor: Monitor and control socket with linked
electronics statement remotely through smart terminal
device.
Timer/Delay: Apply auto-power on/off of electronics
through Timer/Delay set by smart phone.
Light Halo: Indicate power on/off or power-cost level state
through light color changing.

Charge Protection: Protect phone or tablet PC from over
charge to extend battery life.
Safe Protection: V0 grade 750℃ flame retardant material,
current over-load protection, the jacks are with
child-resistant closures.
Auto Power-off: Monitor electriferous state of standby
device and perform auto power-off to save power.
Power Statistics: Monitor and manage power cost of linked
device in real time.
IR Remote: Control various IR electronics through APP
instead of traditional remote. (Only for IR Type Socket)

Safety Notes
(1) Do not install this socket under energized state.
(2) Do not charge with device over power rating.
(3) Do not apply socket in damp or explosive environment.
(4) Do not clean socket with detergent containing alcohol or
methyl alcohol.
(5) Stop to have maintenance if socket is soaking or broken.
(6) Do not twist screw of the socket with too much force.
(7) Do not disassemble the socket by non-professionals.

Installation Notes:
Do not install behind metalwork articles like refrigerator or
micro wave which interferes wireless transmission signals.
Statement:
All illustrations are for reference, please refer to real product.
Product type and technical parameters are subject to change
without prior notice.
As technology constantly updates, if there is inconsistency
between instructions and practical operation, we hold the final
right to explain.
Environment:
Please do not treat disposal product as ordinary household
waste. Leave it to recycling centers according to rules or laws of
local government to protect environment.

Product List
After opening the package, please check all accessories
according to following list:
Wall Socket, Instruction Book(including Warranty Card), Quick
Install Manual, 2 screws,
Certificate.

Catalog
I.Product Type.............................................................................................1
II.Product Summary..................................................................................2
III.Installation Instruction........................................................................4
IV.Configure Instruction..........................................................................6
V.Operation Instruction...........................................................................9
VI.Product Parameter..............................................................................17

1
I.Product Type
iNod
86
S
-W
-10
WH
1
-I
Series
iNod
Type
86Type
Category
S：Socket
Communication
W：Wifi N：Non-smart
Current
10:10A 16:16A
Color
WH：White BR：Bronze CG：Champagne
PL：Purple BU：Blue BK：Black
MBK: Matte Black MWH: Matte White PWH: Porcelain white
Function
1:Full; 2:Non Power-stats; 3:Touch-key; 4:Direct-link
Infrared
No：without IR module I：with IR module

2
II. Product Summary
Wall Socket 10A

3
Wall Socket 16A

4
III. Installation Instruction
It is the same to connect and install smart socket as traditional
socket. Please confirm power is off before installation.
i.Connection Instruction

5
ii.Installation Diagram
Installation Steps:
i) Take off the touch panel of socket;
ii) Connect wire: Neutral Wire, Live Wire, Earth Wire;
iii) Put socket base into flush box, screw on to fix;
iv) Put on the touch panel.

6
IV.Configure Instruction
i.Download APP.
Scan QR Code to download APP-iJia.
For Android and IOS Edition

7
ii.Device Configure
i) Make sure power is on with 220V, when red light twinkles,
Socket is under configuration(Press upper-left button for 5secs,
socket begins to configure);
ii) Make sure smart phone is under Wifi connection;
iii)Start APP, press upper right icon“+”,choose wall socket;
iv)Press”Next ”, input Wifi code, press“configure”;
v)As red-light out from quick twinkles, configure successfully.

8
Configure Page

9
V.OPERATION INSTRUCTION
i.Local Operation:
Press Up-left button to control power; press more than 5 secs
to configure.
ii.Terminal Operation:
Smart phone or tablet PC.

10
Operation Page

11
FUNCTION
OPERATION INSTRUCTION
REMOTE
CONTROL
i.In socket list page, long-press socket icon to
control socket power directly.
ii.In socket page, press socket icon to control
socket power directly.
STATE
FEEDBACK
local control on socket.
ii.In sockets list, it is clear to see all sockets’
working state. As follows:
Gray: Socket is offline. Maybe socket’s power
off or socket’s offline from web connection.
Blue with yellow in the center: Socket is online
and power on.
Blue with gray in the center: Socket is online
and power off.

12
FUNCTION
OPERATION INSTRUCTION
TIMER
Support 6 groups of timer-task set at most.
DELAY
Support 23:59:59 delay set at most.
AUTO
POWER-OFF
To save power, input a certain power data, it
will auto power-off when device‘s working
power below preset value.
CHARGE
PROTECTION
Auto-power off after sensoring full
power-charge of smart phone or tablet PC.