DecorQuip Dream Range 191727 User manual

SUN SENSOR 191727
Dream Range
from
TECHNICAL SPECIFICATIONS
0
1
2
3
4
42mm
Light level indicators
Sun Button:
-press - indicates the light level and modes
-press & hold - switches between modes
UP Button:
moves blind upwards
P2 Button:
pairs the sensor with blind
INSTALLATION OPTIONS
Sensor
Suction pad slot
WINDOW PANE
Suction
pad
Self
adhesive
strip
• Input voltage: 3V
• Transmitting frequency: 433.925MHz
• Transmitting power: 10 milliwatt
• Light intensity range: 15 ~ 75kilolux
• Operating temperature: -20c - 60c
Within
4sec
SENSOR
PAIRED
Press P2
button x2
Press P2
button x1
Within
4sec
SENSOR
PAIRED
Press P2
button x2
Press P2
button x1
Select
a blind
PAIRING SENSOR WITH A SINGLE BLIND
PAIRING SENSOR WITH MULTIBLE BLINDS BLIND
V1

LIGHT LEVELS
For UK use, we recommend LIGHT
LEVEL 1 as a default setting.
!
SWITCHING LIGHT LEVELS
Press the sun button
in quick succession
to cycle between
LIGHT LEVELS
• Light Level 0 0 - 15 kilolux
• Light Level 1 15 - 30 kilolux
• Light Level 2 30 - 45 kilolux
• Light Level 3 45 - 60 kilolux
• Light Level 4 60 + kilolux
1
SENSOR MODES
MODE 1
When the sun is out continuously for 2mins, the sensor will command the blind to close. You will have to use a remote
controller to open the blind again. After openning the blind the process of closing will repeat as normal.
MODE 2
When the sun is out continuously for 2mins, the sensor will command the blind to close. When the light level falls below the
treshold of 15 kilolux (Light Level 1) for continuous 15mins, the sensor will command the blind to open. Even a short burst of
light over the 15kilolux after the blind being shut will reset the timer on the sensor.
MODE 3
When the sun is out continuously for 2mins, the sensor will command the blind to close. When the light level falls below the
treshold of 15kilolux (Light Level 1) within 15mins sensor will open the blind insantinously. If the light level falls below the
treshold after 15mins, sensor will comand to open the blind after 15mins.
SWITCHING MODES
MODES INDICATOR
- Mode 1
- Mode 2
- Mode 3
Amount of ashes indicating the mode:
MODE
CHANGED
Press and hold the
sun button
for 5sec to cycle
between MODES
Indicator
ashes x5
Press the sun
button x1,
sensor indicates
light level and
mode by ashing
an indicator light
LOW BATTERY ALERT
When the battery level is low
the indicator light will ash x10
every 2mins.
Damaged/unused electrical products and batteries are not be disposed with regular household waste. Dispose of this device in
compliance with your authorities waste regulations. Alternatively, return your motors to Decorquip Ltd.
Rhymney House, Unit 8, Bedwas House Industrial Estate, Bedwas, Caerphilly, CF83 8DW. T: 029 2088 0811
Decorquip Ltd