Deep 6 Excursion User manual
Deep6 Excursion
!
1
USER MANUAL
V 1.0 (Beta)
! 3
1. Screen and Functions -
1.1 Buttons function
!
! 4
Locate：Left Top
Name ：Power Key
Func ：Power Switch /
Escape
Locate：Right Top
Name ：Up Key
Func ：Move Up / Quick
Settings.
Locate：Left Middle
Name ：Mode Key
Func ：Menu / Enter
Locate：Left Down
Name ：Down Key
Func ：Move Down /
More info (Watch Mode)
1.2 Main Menu
1.2Main Menu
Description：Watch Mode
Enter：Default Screen when turn on.#
Others : or Choose the WTACH mode
under the main menu
Description：Scuba Mode#
Enter：When dive into the water, Scuba
Mode will be automatically active if your
default mode settings is “SCUBA”.
Others：Or Choose the SCUBA mode
under the main menu
Description：Gauge Mode#
Enter：When dive into the water, Gauge
Mode will be automatically active if your
default mode settings is “Gauge”.
Others：Or Choose the Gauge mode
under the main menu
! 5
Description：Apnea Mode (Free dive)#
Enter：When dive into the water, APNEA
Mode will be automatically active if your
default mode settings is “APNEA”.
Others：Or Choose the APNEA mode
under the main menu
Description：Dive Logs#
Enter：Press the mode button, and
choose LOG mode.
Others：Once entered, press UP / DOWN
key to see the logs in order.
Description：Settings#
Enter：Press the mode button, and
choose SETTINGS mode.
Others：Once entered, press UP / DOWN
key to see the options in order.
1.2Main Menu
! 6
Description：Sync Mode#
Enter：Press the mode button, and
choose SYNC mode.
Others：Once entered, computer will wait
for the connection from your devices.
1.2Main Menu
! 7
1.3 Watch Mode and Setting
1.3.1 Watch Mode
Description：The default screen when turn on.
Enter：By pressing esc to the top layer,
or choose the watch mode from the menu.#
Others：#
1. When the device has no any operation
under the watch mode screen, it will
enter the standby mode (no screen),
and for a longer period (about 24 hrs)
without any operation, then enter the
hibernation status. #
2. Under the standby mode, you may
wake up the device by twisting it about
45 degree, or press any buttons. If you
dive into the water, it will switch to the
dive mode after 1.5M.#
3. Under the hibernation mode, you can
only turn on the device by pressing the
power button, all the settings and data
will remain in it. Please notice that,
always check your device before your
dive.
! 8
1.3.2 Watch Mode Settings
Description：Date Settings
Enter：Press the Up Ley under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the DATE
and press Middle Key to enter, then you
will see the dates is blinking, then press
Up or Down to adjust, then press the
Middle key to confirm and next setting,
until stop blinking and finish the settings.
Description：Date Format Settings
Enter：Press the Up Key under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the FORMAT
and press Middle Key to enter, then you
will see the YY MM DD is blinking, then
press Up or Down to adjust, then press
the Middle key to confirm and next setting,
until stop blinking and finish the settings.
Description：Date Format Settings
Enter：Press the Up Key under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the UTC and
press Middle Key to enter, then you will
see a blinking, then press Up or Down to
adjust, then press the Middle key to
confirm and next setting, until stop
blinking and finish the settings.
Description：Date Format Settings
Enter：Press the Up Key under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the UTC and
press Middle Key to enter, then you will
see a blinking, then press Up or Down to
adjust, then press the Middle key to
confirm and next setting, until stop
blinking and finish the settings.
! 9
Description：Auto active mode when dive
into the water.#
Enter：Press the Up Key under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the AUTO
MODE and press Middle Key to enter, then
you will see a blinking, then press Up or
Down to select, then press the Middle key
to confirm, until stop blinking and finish
the settings.
Description：Exit#
Press to exit the current page.
1.3.2 Watch Mode Settings
! 10
1.4 Scuba Mode and Settings
1.4.1 Scuba Mode
Scuba Mode
Enter：Press the Up Ley under the watch
mode, or from the Menu -> Setting.
Others：Move up or down to the DATE
and press Middle Key to enter, then you
will see the dates is blinking, then press
Up or Down to adjust, then press the
Middle key to confirm and next setting,
until stop blinking and finish the settings.
Description: Scuba Preview Mode
：Battery Status#
1008 mBar: Current Atmosphere Pressure
(No mBar shows on screen after C01-2F)#
SF%: Conservativeness, there are 3 levels,
Normal (NORM), Conservative (CONS),
and Aggressive (AGGR), representative the
different setting and affect the algorithm
calculation.#
PPO2: User preset partial pressure of the
oxygen between 1.2 - 1.6.
MOD: Max operation dpeth. based on the
PPO2 settings and the O2 percentage
settings, the maximum depth that diver
can go.#
TIME: Dive Time#
O2%：the O2 percentage of the gas.
! 11
Description: Scuba Under Water Mode -
When exceed the NDL
NDL: When exceed the NDL time, the first
3 mins will be shown seconds, when
exceed time over 3 mins, the NDL time is
shown in minutes.#
CEILING: When exceed the NDL, means
diver is not allow to decent to the surface
without any stop, CEILING shows the
depth that diver should stop and wait for
the stop count down to reduce the risk
After NDL, the maximum depth to which
the diver can rise.。
Description: Scuba Under Water Mode -
When exceed the NDL and ascent to ceiling
depth.
STOP: Stop time for the deco stop, when
you exceed the NDL, and back to the
ceiling depth, stop time shows and start to
counting down, please follow the stop
time if you have enough gas and no other
potential risks.#
CEILING: the depth that yo should stay when
you are taking the deco stop.
Description: Scuba Under Water Mode
18.6m: Current Depth#
NDL: The Non-Decompression Limit time
in minutes.#
PPO2: Current PPO2, there has alarm if
reaching the limit.#
：Ascent speed in Meter/Min, If reach the
10M/minutes, there has alarm.#
TIME: Dive time.#
TEMP：Water temperature.
! 12
Description: Scuba Under Water Mode -
When exceed the NDL and finished the
ceiling depth stop.
CLEAR：When you finish the deco stop at the
ceiling depth, it shows CLEAR means the stop
finished, you may slowly ascent to surface.
! 13
1.4.2 Scuba Mode Settings
Description: Scuba Preview Mode
Press the Top Right buttons to enter the
settings.
Notes: Scuba mode settings is available only
under the predate mode
Description：Nitrox Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the NOTROX
and press Middle Key to enter, then you
will see a blinking, then press Up or Down
to select, then press the Middle key to
confirm, until stop blinking and finish the
settings. You may set the O2% range is 21
- 56.#
Notes : Please make sure you have
measure the gas combination and
correctly input to your computer. Before
you use the NITROX, you MUST have
received a proper training with
certifications and aware the related risk of
the NITROX.
! 14
Description：PPO2 Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the PPO2
and press Middle Key to enter, then you
will see a blinking, then press Up or Down
to select, then press the Middle key to
confirm, until stop blinking and finish the
settings. You may set the range is form 1.2
- 1.4
Notes : Please notice that, before you
change the PPO2 settings, make sure you
understand the related risk and changing,
default is 1.4
Description：Safety Factor -
Conservativeness Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the SF and
press Middle Key to enter, then you will
see a blinking, then press Up or Down to
select, then press the Middle key to
confirm, until stop blinking and finish the
settings. there are 3 levels, Normal
(NORM), Conservative (CONS), and
Aggressive (AGGR).#
Notes : Please make sure you have fully
understand that change the settings will
affect the algorithm calculation, and you
knows the related risks.
1.4.2 Scuba Mode Settings
! 15
Safety Factor Note: The Safety Factor levels (SF 1-3) roughly correspond with the Gradient Factor
pairs of 35/75, 40/85, and 45/95. A Safety Factor Line has been applied to each to provide an
additional margin level of safety for divers.
Description：Depth Alarm - on./off.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the SDPTH-
ALM and press Middle Key to enter, then
you will see a blinking, then press Up or
Down to select, then press the Middle key
to confirm, until stop blinking and finish
the settings. If you set the SDPTH-ALM is
on and when you reach the preset depth,
the alarm will be active.#
Notes : SDPTH-ALM, S stands for Scuba,
DPTH stands for Depth, ALM represent
Alarm.
Description：Dive Time Alarm - on./off.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the STIME-
ALM and press Middle Key to enter, then
you will see a blinking, then press Up or
Down to select, then press the Middle key
to confirm, until stop blinking and finish
the settings. If you set the STIME-ALM is
on and when you reach the preset dive
time, the alarm will be active.#
Notes : STIME-ALM, S stands for Scuba,
TIME stands for Dive Time, ALM represent
Alarm.
1.4.2 Scuba Mode Settings
! 16
Description：Depth Alarm Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the SDPTH-
THD and press Middle Key to enter, then
you will see a blinking, then press Up or
Down to select, then press the Middle key
to confirm, until stop blinking and finish
the settings. If you reach the SDPTH-THD
depth, the alarm will be active.#
Notes : SDPTH-THD, S stands for Scuba,
DPTH stands for Depth, THD represent
Threshold.
Description：Dive Time Alarm Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the STIME-
THD and press Middle Key to enter, then
you will see a blinking, then press Up or
Down to select, then press the Middle key
to confirm, until stop blinking and finish
the settings. If you reach the STIME-THD
dive time, the alarm will be active.#
Notes : STIME-THD, S stands for Scuba,
TIME stands for Dive Time, THD represent
Threshold.
1.4.2 Scuba Mode Settings
! 17
Description：Sampling Rate.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the
SAMPLING and press Middle Key to enter,
then you will see a blinking, then press Up
or Down to select, then press the Middle
key to confirm, until stop blinking and
finish the settings.#
Notes : Sampling rate mean the sensor will
record and save in Log Memory, the longer
sampling rate occupier less memory
space, shorter rates needs more space in
the log memory.
Description：Log Start Depth Setting.#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the LOG
START and press Middle Key to enter,
then you will see a blinking, then press Up
or Down to select, then press the Middle
key to confirm, until stop blinking and
finish the settings. Preset range is 1.5 - 3M#
Notes : Preset range is 1.5 - 3M
1.4.2 Scuba Mode Settings
! 18
Description：Scuba User Interface Setting#
Enter：Press the Up Key under the Scuba
Mode - Preview, or from the Menu ->
Setting.
Others：Move up or down to the UI and
press Middle Key to enter, then you will
see a blinking, then press Up or Down to
select, then press the Middle key to
confirm, until stop blinking and finish the
settings.#
Notes : Preset options are LARGE and
NORMAL. When you set the large screen,
please see the following instructions.
1.4.2 Scuba Mode Settings
! 19
1.5 Gauge Mode
1.5 Gauge Mode
Description: Gauge Mode
：Battery Indication#
1008 mBar: Current ATM#
AVG：Average Depth in the current stage#
STPW：Stop Watch - Dive Time in the
current stage#
TIME: Dive Time#
TEMP：Water temperature.
Notes: you may reset the AVG - Average Depth
and and STPW - Stop Watch - Dive Time in the
current stage by pressing the Right Top Button to
reset during the dive.
! 20
Table of contents
Other Deep 6 Diving Instrument manuals
Popular Diving Instrument manuals by other brands
Novasub
Novasub SCC-1DR Operation manual
Inter-fab
Inter-fab T7 Assembly/installation instructions
Dive Gear Express
Dive Gear Express DGX Gears D6 First Stage Service Manual
Sherwood Scuba
Sherwood Scuba gemini Repair Program
heinrichs weikamp
heinrichs weikamp OSTC Series user manual
RJE
RJE TAC-200A Operation manual
