
· 6 ·
MADE IN CHINA
Live Chat Support
Scan Here
+1 805 327 1596(US)
+44 7411 149 946(UK)
support@deerdance.com
www.capetronix.com
After-sales Service
Or Register Extra 1 Year Warranty?
Can't Connect?
Need Help?
Web
Email
WhatsApp
Excellent customer service will be with you 24-7. Should you have any
questions with our products or any suggestion please kindly contact us and
we will resolve them within 24 hours.
ATTENTION
PoleMountingWORKING MODE
After power on, the lighting will be turned on automatically at night
and turned off automatically during the day.
Day Night
LIMITED WARRANTY
Deerdance warrants this product to be free from defects in material
and workmanship for a period of 1 year from the date of purchase.
Fail to comply with Product warnings shall void the warranty. This
warranty does not extend to any losses or damages due to misuse,
accidents, abuse, neglect, normal wear and tear, acts of God, use in
violation of law or electrical standards. Deerdance may examine
the product to determine if it is defective. If so, deerdance will
provide replacement service to address a defect in the materials or
workmanship or of the same or similar product at no charge, labor
costs excluded. The proof of purchase from Amazon should be
provided. This is the exclusive remedy. Liability for incidental or
consequential damages is expressly excluded. Some states and
jurisdictions do not allow the exclusion of implied warranties or
limitation of incidental or consequential damages, so such
limitations and exclusions may not apply. This warranty gives you
specific legal rights, and you may also have other rights that vary
from state to state(or by country or province).
1. Remove Bar-type Bracket.
2. Feed wires through the lamp-post, then wire to line voltage.
3. Mount lamp body to pole, and attach the bar-type bracket
firmly with screws.
4. Drill holes on the wall, and put in plastic setscrews.
5. Place the self-tapping screws into holes on the mounting
bracket, line up with holes in wall and secure firmly with screws.
6. Installation completed.
To prevent personal injury or product damage only licensed
electricians should install.
To avoid electric shock or component damage disconnect power
before attempting installation or servicing.
Disconnect product and allow cooling prior to servicing.
Any alteration or modification of this product is forbidden as it may
cause personal injury, death, property damage and/or product
malfunction.
To prevent product malfunction and/or electrical shock this product
must be properly grounded.
This luminaire is designed to operate in ambient temperatures
ranging from -40°F to 113°F.
MIN 167°F SUPPLY CONDUCTORS.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.