Dekko ECA MARINA User manual

MARINA POWER DOCK INSTALLATION
10 Mountain View Drive | Shelton, CT 06484 | P: 800-521-3175 | www.electri-cable.com
9065-0269 REV B © ECA–January 2017—Product specifications subject to change without notice Page 1
Notes: * Ensure all screws will not pierce finished work surface.
** It is important that the Marina is centered in cutout and there is
a consistent air gap between the Marina and opening.
Surface Preparation:
1- Provide a cutout in surface for the Marina
Power Dock at desired location as shown in
Fig.1. (Note Fig. 1 represents underside of
work surface).
2- Mark or pilot drill the location for center
mounting screws as shown in Fig.1. *
Marina Power Dock Installation:
1- Install 1 - #10 pan head screw (not provided) into center mounting screw position on underside of work
surface, see Fig.1. Do not fully tighten screw at this point.
2- Insert middle flange slot of one end of the Marina onto mounting screw to support the Marina while
installing 2nd - #10 pan head screw (not provided) align with the other center mounting screw position. Do
not fully tighten screws at this point.
3- Center the Marina in the cutout and secure to underside of surface using remaining holes in side flanges.**
4- Tighten center screws from step 1 and 2 above.
Tools Needed
Components & Hardware
Marina Grommet
Fig. 1

MARINA POWER DOCK INSTALLATION
10 Mountain View Drive | Shelton, CT 06484 | P: 800-521-3175 | www.electri-cable.com
9065-0269 REV B © ECA–January 2017—Product specifications subject to change without notice Page 2
Making Connections:
Connect power cord to 120 VAC outlet.
Marina Power Dock technical specification:
Power
5, 120 VAC spill resistant receptacles.
4, USB charging ports that work with USB compatible devices. Each pair capable of
(2.1A, 11 Watts, 5V/DC)
Integral circuit breaker protection. (located on bottom of unit)
Regulatory compliance
Safety –cETLus
Shipping
Weight –12 lbs.
Carton –16” x 12” x 12”
Warranty
This product is warranted for a period of one (1) year from the date of purchase. This warranty is null and void in the case of
abuse, uses outside its normal intended use, or field modifications made in any manner.