Zero Home Dock Operating and safety instructions

Welcome Guide
Home Dock

What’s in the box
Zero Home Dock
USB Type-C Wall Charger

Parts of the Zero Home Dock
Charging Port
(Type-C)
LED Indicator
Wireless Charging SurfaceWireless Qi Pad
Charging Slots
Place your Home Dock on a at and level surface. Once your
Home Dock is plugged in, it is ready to charge your devices.

LED Indicator
On the front of the Home Dock, the LED indicator signies
when a device is charging
Charging Error

Charge your mobile device with the
Home Dock
Place your wireless enabled Qi device on top of the Zero logo
to charge.
If your device is charging, the Home Dock will indicate the
power ow with a solid blue LED light.
Wireless Charging Surface

Charge your Zero Wireless Qi Pads
(not included) with the Home Dock
To charge a Zero Wireless Qi Pad on the Home Dock, place
your Qi Pad in the slot with the contact points facing down.
Contact Points

FAQ
• How can I make sure the home Dock is “on”?
- The Home Dock’s LED light will illuminate if a device
is placed on the Home Dock, indicating that the device
is charged or charging.
• What phone cases can I use with the Home Dock?
- Using an ultra-thick protective phone case or case with
magnetic/iron plate is not recommended as it may affect
the wireless charging function.
- Wireless charging has been known to occasionally interfere
with magnetic strips on cards, thus it is not recommended to
wireless charge devices with “wallet” cases.
- The home Dock supports charging through phone cases up
to 4mm thick.
• What devices are supported by the Home Dock?
- iPhone models: SE, 8, 8 Plus, X, XS, XS Max, XR, 11, 11
Pro, 11 Pro Max, 12, 12 mini, 12 Pro Max, 12 Pro.
- Android models: Most wireless enabled Qi devices.

Additional Information
• When the device is fully charged, remove it from the
Home Dock.
• When the device is not placed on the charging surface
properly or depending on the location of the device’s wireless
charging coil, your device may not charge properly.
• If you use wireless charging in areas with weak network
signals, you may lose network reception.
• If the Home Dock detects a non-compatible device, it will not
charge and the LED indicator will turn red.

Specications
The single coil is located inside the Home Dock,
directly under the Zero logo
Use the original or certied cable and wall
charger
Do not place foreign materials, such as metal
objects, magnets, and magnetic stripe cards
between the mobile device and the Home Dock
Model No.
Wireless Charge
Input
Output
Size
Weight
ZERO-HDOCK
High Efciency Charging
9V / 2A
5V / 1.5A (Pin x 2) & 10W (Wireless Charge)
176 x 101 x 22 mm / 6.9 x 4.0 x 0.8in
230 g / 8.1 oz

Warranty Information
The company hereby warrants to the original retail purchaser of
this product that should this product or any part thereof, under
normal use and conditions, be proven defective material or
workmanship within one year parts and 90 days labor from the
date of the original purchase, such as defect (s) will be repaired
with recondition product (at the company’s option) for parts and
repair labor. This limited warranty is the purchaser’s exclusive
remedy for any such defect (s).
To obtain repairs or replacement within the terms of this warranty,
Proof of warranty coverage (i.e. – dated bill of sale) is required.
This warranty does not apply to any product or part thereof which,
in the opinion of the company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse,
neglect, accident or by removal or defacement of the factory
serial number/bar code label (s).
Please visit www.myzerocharge.com
or
Contact us 1-877-515-1544
Open Mon-Fri 9am – 5pm PST
Zero International Limited
20955 Pathnder Road. #100
Diamond Bar, CA 91765

The opinion of the company with respect to this matter shall be
nal. THE EXTENT OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVEN,
SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY PURCHASER FOR THE PRODUCT. THIS
WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES OR LIABILITES. ANY IMPLITED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HERE UNDER, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, MUST BE BOUGHT WITHIN A PERIOD OF
12 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER.
No person or representative is authorized to assume for the
company any liability other than expressed herein connection
with the sale of this product. Some jurisdiction do not allow
limitations on how long an implied warranty lasts or the exclusion
of limitation of incidental or consequential damages so the above
limitations or exclusions may not apply to you. This warranty gives
you specic legal rights and you may also have other rights,
which vary from jurisdiction to jurisdiction

FCC Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
that may cause undesired operation.
Changes or modications not explicitly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment. Note: this equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 and part 18 of the FCC Rules. These limits are
designed to provided reasonable protection against interference in
a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does not cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measure:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help. The equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. During the operation

of device distance of 15 cm surrounding the device and 20 cm
above the top surface of the device must be respected. This
device complies with Part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with instructions, may
cause harmful interference to radio communications. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
• Increase the separation between the equipment and any other
radio device.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

Customer Service
12-month limited warranty
Lifetime technical support
[email protected]
1-877-515-1544 Mon-Fri 9:00 am – 5:00 pm PST
www.myzerocharge.com