Short Form Specifications
Exterior Top to be constructed of one piece 16-gauge stainless
steel, with integral 2.12” (5.4cm) square nosing on front and 4”
(10.2cm) high by 2” (5.1cm) thick backsplash on rear. Top to be
insulated with 2” (5.1cm) high density insulation.
Base interior to have 22-gauge stainless steel back and bottom.
Interior ends and door frames to be thermoformed ABS plastic.
Base to be insulated with 1.50” (3.8cm) high density foamed in
place polyurethane.
Exterior back and bottom of base to be 24-gauge galvanized
steel. Exterior ends to be constructed of 18-gauge galvanized
steel.
Door(s) have a thermoformed ABS plastic interior liner and 22
gauge stainless steel exterior front. Door(s) have black recessed
handle(s) and a snap-in magnetic gasket which is easily replace-
able. Unit to be furnished with (1) epoxy coated wire shelf for
each door section.
Base to be furnished with blower coil with coil housing to enclose
expansion valve and fans. Unit is provided with defrost timer, ther-
mostat and solenoid valve in mechanical section. Unit is designed
to maintain 0°F (-18°C) to -5°F (21°C).
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel
legs.
Refrigeration System Components— HFC-404A
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit must be hard wired.
Optional Accessories & Modifications
906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030A Cutting board (.5” x 10” composite)
107F Tray rack
102 Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
E-(3) 19”, 27” or 32” in lieu of one door
108 Locks
213 *220V/50 cycle
* Inclusion of this option will alter the
electrical specifications of the unit
Model F18FR66
31.5” (80cm) Deep Remote Freezer Base Work Tables
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18FR
