Delfield Meridian MFR1-G User manual

MERIDIAN SERIES®GLASS DOOR REACH IN FREEZERS
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES®
Glass Door Reach-in Freezers
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: [phone]
Fax: [phone]
Email: info@delfield.com
Approval _________________
Date____________________
SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments. Unit
is mounted on 6” (15.24cm) metal legs.
Doors: Unit is provided with hinged glass front
door(s). Doors on freezer units are constructed with
double-pane low E, Argon filled tempered thermopane
glass. Glass doors are constructed with a combination
of extruded aluminum & PVC, and are provided with
magnetic gaskets. Doors will have self-closing hinges and
continuous handle along vertical dimension of door(s).
Glass door constructed to eliminate need for heater wires.
• Please specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Freezers: All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between -5˚F and 0˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
Evaporator defrost is automatic using a time initiated,
time/temperature terminated system with electric heaters.
Evaporator condensate is eliminated using an energy
efficient hot gas system.
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
MODELS:
 MFR1-G Single section  MFR2-G Two section  MFR3-G Three section
Full height door Full height doors Full height doors
 MFR1R-G Remote  MFR2R-G Remote  MFR3R-G Remote
 MFR1-GH Single section  MFR2-GH Two section  MFR3-GH Three section
Half height door Half height doors Half height doors
 MFR1R-GH Remote  MFR2R-GH Remote  MFR3R-GH Remote
MRR2-GHSH
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with minimal
energy cost
• Exterior digital thermometer with high/low temperature
alarm
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb. capacity.
Flexible placement on 1” centers allows maximum storage
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters

MECHANICAL DATA
SHELVES NO UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. SYSTEM CAP WEIGHT PLUG
FREEZERS
MFR1-G 115 11.0 24.96 12.81 3 1/2 1923 406 5-15P
MFR1-GH 115 11.0 24.96 12.81 3 1/2 1923 406 5-15P
MFR2-G 115/208-230 9.1 51.92 27.54 6 1 3843 705 —
MFR2-GH 115/208-230 9.1 51.92 27.54 6 1 3843 705 —
MFR3-G 115/208-230 10.0 78.89 42.27 9 1 1/2 5940 960 —
MFR3-GH 115/208-230 10.0 78.89 42.27 9 1 1/2 5940 960 —
PLAN VIEW MFR1-G PLAN VIEW MFR2-G PLAN VIEW MFR3-G
29”
73.7cm
56”
142.2cm
34”
86.4cm
34”
86.4cm
34”
86.4cm
83”
210.9cm
ELEVATION VIEW MFR3-GELEVATION VIEW MFR2-GELEVATION VIEW MFR1-G
DOOR CLEARANCE DETAIL
ALL MODELS
81”
205.7cm
27.25”
69.21cm
END SECTION VIEW
ALL MODELS
PERSPECTIVE VIEW
ALL MODELS
56.76”
144.2cm
12.14”
30.8cm
34.0”
86.4cm
24.02”
61.0cm
27.75”
70.5cm
31.75”
80.6cm
3.80”
9.7cm
26.48”
67.3cm
25”
63.5cm 52”
132.1cm 79”
200.7cm
6.00
15.2cm
Meridian Series®Glass Door Reach-in Freezers
Model #__________
CSI Section 11400
Printed in the USA.
03/07
DSMRG_F
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: [phone]
Fax: [phone]
Email: info@delfield.com
Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.
REMOTE SHELVES NO UNIT BTU/HR SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P.* SYSTEM CAP WEIGHT PLUG
FREEZERS
MFR1R-G 115 10.1 24.96 12.81 3 1/2 — 406 —
MFR1R-GH 115 10.2 24.96 12.81 3 1/2 — 406 —
MFR2R-G 115 10.9 51.92 27.54 6 1 — 705 —
MFR2R-GH 115 10.9 51.92 27.54 6 1 — 705 —
MFR3R-G 115 13.4 78.89 42.27 9 1 1/2 — 960 —
MFR3R-GH 115 13.5 78.89 42.27 9 1 1/2 — 960 —
58”
147.3cm
*Recommended
MECHANICAL DETAIL