SPECIFICATION LINE: SELF CONTAINED GLASS DOOR ROLL-IN REFRIGERATOR
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
Specification Line
Self-Contained Glass Door Roll-In Refrigerator
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date____________________
SSRRI2-G
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor.Interior light mounted to the interior ceiling is
controlled automatically through a switch mounted in
the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless
steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement
throughout the cabinet interior.
Glass Doors: Double paned tempered thermopane
glass. Constructed with a combination of extruded
aluminum and PVC. Each door has two edgemount,
self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle
is continuous along vertical dimension of the door. Door
gaskets are magnetic and mount to the door, snapping in
place and removable with out tools. Keyed door lock is
mounted to the door. Lock is mounted to the door. Lock
engages into a heavy duty strike mounted to the cabinet
face.
Refrigeration system: All components are mounted
to the exterior cabinet ceiling, outside the food zone and
are assembled as one piece and can be removed as one
piece. Environmentally friendly R404A refrigerant is used.
System has the capability of maintaining between 27˚F and
40˚F in heavy use food service operations. Refrigerant is
metered using a highly responsive thermostatic expansion
valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which
provides improved pull down times, reducing compressor
cycling and longer compressor life with lower energy
consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V,
60Hz, single phase. A 10’ cord and plug is supplied
attached to a junction box mounted on the exterior
top of the cabinet. Three section standard voltage is
115/208-230V, 60Hz single phase. Electrical connection
must be hard wired to junction box.
MODELS
SSRRI1-G 1 section stainless interior
full door
SARRI1-G 1 section aluminum interior
full door
SSRRI2-G 2 section stainless interior
full door
SARRI2-G 2 section aluminum interior
full door
SSRRI3-G 3 section stainless interior
full door
SARRI3-G 3 section aluminum interior
full door
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Built in door locks with heavy duty strikes
• Exterior digital thermometer with high/low
temperature alarm
• Easy to use electronic control
• Easy access “flip up” shroud
• 10’ attached cord and plug standard on 115V units
• Stainless steel breaker strips
• Energy savings door heater switch
• Inclined stainless steel exterior ramp
• Environmentally friendly 404A refrigerant
• Flourescent light
• Two year parts & labor warranty
OPTIONS AND ACCESSORIES
Security package
Stainless steel back
Laminate on front, sides and back
Heat shield end
Full height shelf kit
Half height shelf kit
Flat exterior ramp
High humidity evaporator coil
220-50-1 electrical
220-60-1 electrical
Alarm control display