Delites BN03 User manual

7x11cm

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed,
including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or
knobs. Use oven mitts or potholders.
3. To protect against electrical shock, do not
immerse cord or plugs or temperature control
probe in water or other liquid.
4. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Unplug from outlet when not in use and
before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning the
appliance.
7. Do not operate any appliance with a
damaged cord or plug or after the appliance

malfunctions, or has been damaged in any
manner. Return appliance to the nearest
authorized service facility for examination,
repair or adjustment.
8. The use of accessory attachments not
recommended by the appliance manufacturer
may cause injuries.
9. Do not use outdoors.
10. Do not let cord hang over the edge of table
or counter, or touch hot surfaces.
11. Do not place on or near a hot gas or
electric burner, or in a heated oven.
12. Extreme caution must be used when
moving an appliance containing hot oil or
other hot liquids.
13. Always attach temperature control probe
to appliance first, then plug cord in the wall
outlet. To disconnect, turn temperature control
probe to OFF, then remove plug from wall
outlet.
14. Do not use appliance for other than
intended use. Use with wall receptacle only.
ADDITIONAL IMPORTANT
SAFEGUARDS

CAUTION HOT SURFACES: This appliance
generates heat and escaping steam during use.
Proper precautions must be taken to prevent
the risk of burns, fires or other injury to
persons or damage to property.
CAUTION: This appliance is hot during
operation and retains heat for some time after
turning OFF. Always use oven mitts when
handling hot materials and allow metal parts
to cool before cleaning. Do not place anything
on top of the appliance while it is operating or
while it is hot.
1. All users of this appliance must read and
understand this Instruction Manual before
operating or cleaning this appliance.
2. The cord to this appliance should be
plugged into a 220-240 V AC electrical outlet
only.
3. If this appliance begins to malfunction
during use, immediately unplug the cord. Then
remove the temperature control probe. Do not
use or attempt to repair the malfunctioning
appliance.
4. Do not leave this appliance unattended
during use.

Plasticize Warning
CAUTION: To prevent Plasticize from migrat-
ing to the finish of the counter top or table top
or other furniture, place NON-PLASTIC
coasters or place mats between the appliance
and the finish of the counter top or table top.
Failure to do so may cause the finish to darken;
permanent blemishes may occur or stains can
appear.
Electric Power
If the electrical circuit is overloaded with other
appliances, your appliance may not operate
properly. It should be operated on a separate
electrical circuit from other appliances.
Temperature Control Probe
1. The temperature control probe is the nerve
center and brain of the electric Griddle. Treat
it carefully. Dropping or banging it could
change its calibration and make the tempera-
ture settings inaccurate.
2. Rotate the dial to select the temperature as
called for in the recipe.
3. The indicator light on the temperature
control probe will illuminate as soon as the
dial is rotated. The light will go out once the
selected temperature has been reached.
4. Allow the Griddle to cool before removing
the temperature control probe.

5. To clean the temperature control probe,
simply wipe down with a soft, damp cloth.
Make sure you dry it thoroughly before using
again.
NOTE: The temperature control probe is not
submersible.
CAUTION: Use the temperature control probe
supplied with this Griddle only. The use of any
other temperature control probe may cause
fire, electric shock, or injury.
Before Using for the First Time
1. Carefully unpack the Griddle and remove
all packaging materials.
2. Place the non-stick Griddle on a clean, flat
working surface.
NOTE: Some countertop and table surfaces,
such as Corian® and other surfaces, are not
designed to withstand the prolonged heat
generated by this Griddle. We recommend
placing a hot pad or trivet under the Griddle
beforehand to avoid possible damage to the
surface. Be sure the sides and back of the
Griddle are at least 4 inches away from any
walls, cabinets, or objects on the counter or
table.
3. Before first use, see Hints For Care and Use
of Non-Stick Surface and Care & Cleaning
Instructions sections of this Instruction Manual.

4. Before cooking in the Griddle for the first
time, wash the non-stick Griddle in mild
dishwashing soap, wipe and allow to dry.
NOTE: The Griddle (without the temperature
control probe) is dishwasher safe.
5. Insert drip tray into rails under the Griddle’s
side, positioned directly under the grease
drain.
6. Turn the temperature control knob on probe
to OFF position and attach securely in place.
7. Coat the non-stick surface with vegetable
shortening before heating. If necessary,
remove excess oil with paper towel.
Hints For Care and Use of Non-Stick Surface
1. To avoid scratching the non-stick surface,
do not stack objects on the Griddle.
2. Use medium to low heat for best cooking
results. Very high temperatures can cause
discoloration and shorten the life span of any
non-stick surface. If higher temperatures are
necessary, preheat on medium heat for a few
minutes.
3. Use only nylon, plastic, or wooden utensils
with care to avoid scratching the non-stick
surface. Never cut food on the Griddle.

4. Remove stubborn stains with a plastic
scouring pad and mild dish washing liquid;
DO NOT USE STEEL WOOL.
Operating Instructions
1. Turn temperature control probe to the OFF
position.
2. Plug the temperature control probe securely
into Griddle’s control probe socket.
3. Plug cord into any standard 220-240V AC
wall outlet.
IMPORTANT: ALWAYS PLUG CORD INTO
GRIDDLE FIRST, THEN INTO WALL OUTLET.
4. Preheat Griddle for approximately 5
minutes before cooking. To preheat, turn the
temperature control to desired temperature.
The indicator light on the temperature control
probe will illuminate as soon as the dial is
rotated. The light will go out once the selected
temperature has been reached.
NOTE: During cooking, the light will go on
and off indicating that the Griddle is maintain-
ing proper temperature.
CAUTION: Griddle surfaces are hot during use.
5.When cooking bacon or foods containing
large quantities of grease, it may be necessary

to check the drip tray to make sure it is not
full. Remove drip tray; empty contents and
wash if needed. See the Time/ Temperature
Chart for basic suggested cooking information.
6. When cooking has been completed, turn
the temperature control to the OFF position.
The indicator light on the temperature control
probe will turn off.
7. Unplug cord from wall outlet. Let the
Griddle cool completely.
8. Remove temperature control probe from
Griddle. Follow the Care & Cleaning Instruc-
tions described in this Instruction Manual.
User Maintenance Instructions
This appliance requires little maintenance. It
contains no user serviceable parts. Do not try
to repair it yourself. Any servicing requiring
disassembly other than cleaning must be
performed by a qualified appliance repair
technician.