Traeger TFB42DVB User manual

ATTACH HANDLE PLACE INTERIOR
PARTS AND BUCKET
56
INSTALL LEG BRACES
3
4
Probe
Selector
Probe1
Probe2
Probe
Selector
Probe1
Probe2
Probe
Selector
Probe1
Probe2
Probe
Selector
Probe1
Probe2
In this step: 12 13 14 15
In this step: Fx 2 Gx 4 Hx 2
In this step: 11
This will require TWO people.
3
1
11
You are ready to season your grill and get Traeger’ing!
Refer to your Owner’s Manual for operation instructions.
In this step: 89In this step: 10
1 2 3
2
ATTACH FLUE PIPE AND CHIMNEY CAP ASSEMBLY
2 x
TFB42DVB
TFB65DVC
ASSEMBLY
GUIDE
Please read this entire manual before installation and use of this pellet fuel-burning
appliance. Failure to follow these instructions could result in property damage, bodily
injury, or even death. Contact your local building or re ofcials about restrictions
and installation inspection requirements in your area.
Traeger Pellet Grills LLC
1215 E. Wilmington Ave
Salt Lake City, UT 84106
traegergrills.com
WARNING!
Many parts of the grill will become very hot during operation. Care must be taken to avoid burns, both
during operation and afterwards, while the grill is still hot.
• Never leave the grill unattended when young children are present.
• Never move the grill when it is operating.
• Let the grill cool thoroughly before moving or attempting to transport.
A MAJOR CAUSE OF FIRES IS FAILURE
TO MAINTAIN REQUIRED CLEARANCES
(AIR SPACES) TO COMBUSTIBLE
MATERIALS. IT IS OF UTMOST
IMPORTANCE THAT THIS PRODUCT BE
INSTALLED ONLY IN ACCORDANCE WITH
THESE INSTRUCTIONS. SAVE THESE
INSTRUCTIONS.
Ex 4 Ex 4
In this step: 7In this step: 7
2

Probe
Selector
Probe1
Probe2
4 5
2
1 2
1
6
Probe
Selector
Probe1
Probe2
Traeger’ing is more fun with friends! (No, really, you will need two people to lift the grill.)
NOTE: You should assemble grill on a clean, at
surface, as you will need to lay it on its back as well
as its front at different times during assembly.
In this step: 56
In this step: 2In this step: 12
In this step: 3In this step: 4
In this step: 5In this step: 6
Ax 2 Bx 4 Cx 2 Dx 2 Ax 2 Bx 4 Cx 2 Dx 2
Ax 2 Bx 4 Cx 2 Dx 2 Ax 2 Bx 4 Cx 2 Dx 2
READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THE GRILL
PARTS LIST
BLISTERPACK PARTS NEEDED
Hex Key (1 pc)
Screwdriver (1 pc)
Wrench (2 pcs)
BWasher: 5/16" (16 pcs)
HHex Nut: 1/4-20 (2 pcs)
ABolt: 5/16-18 socket head (8 pcs)
GWasher: 1/4" (4 pcs)
FBolt: 1/4-20x.50 (2 pcs)
DHex Nut: 5/16-18 (8 pcs)
11
2
14
6
5
12
10
9
14
13
4
3
77
8
1
12
40.00"
12.00" 12.00"
WARNING!
• When operating this
grill under overhead
combustibles, a
MINIMUM of 40 inches
is required.
• When operating this
grill, maintain a
MINIMUM distance
of 12 inches from the
Grill to combustibles.
IMPORTANT!
• The grill is very heavy.
Always lift the grill
with TWO people.
3
Grill is very heavy. Always lift grill with TWO people.
UNPACK GRILL AND INSTALL SIDE LIFT BAR
INSTALL LEGS
3
CSpring Washer: 5/16" (8 pcs)
12
GRAB THE 6-PACK, GET THE TOOLS, CUE THE RADIO —
IT’S ALMOST TRAEGER’ING TIME.
NOTE: When fastening legs to grill body, fasteners assemble
in this order: ABLeg BCD
EBolt: 1/4-20x.5 (8 pcs)
This will require TWO people.