Delta Electronics SMT Power Inductor SIL625 User manual

DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
SMT Power Inductor
SIL625 Type
RoHS compliant.
Small size (5.6mm*5.6mm),Low profile (2.0mm max. height) SMD type.
Magnetically shielded, suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Features
36
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
o
25 C: 100KHz, 0.1V
Electrical Characteristics:
SIL625 - 0R6 0.6 0.016 4.30
SIL625 - 1R0 1.0 0.026 3.40
SIL625 - 1R8 1.8 0.030 2.90
SIL625 - 2R2 2.2 0.032 2.50
SIL625 - 3R0 3.0 0.037 2.30
SIL625 - 3R8 3.8 0.045 2.00
SIL625 - 4R7 4.7 0.048 1.80
SIL625 - 220 22.0 0.181 0.70
2
Irated
(Adc)
PART NO.
DCR
( ) MAX
1
L
(uH)
1. Tolerance of inductance : 30%.
2. Irated is the DC current which cause the inductance drop less than 35% of its nominal inductance without current
o
and the surface temperature of the part increase less than 45 C.
oo
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
Mechanical Dimension:
6.3
1.5
C
D
B
A6.3
UNIT : mm/inch
C = 2.5/ 0.098 Max.
A =6.0 / 0.236Max.
B = 6.0/ 0.236 Max.
D = 2.0 0.1 / 0.079 0.004
2
1
RECOMMENDED PAD PATTERNS